Rajala v. Allied Corp.

66 B.R. 582, 2 U.C.C. Rep. Serv. 2d (West) 1203, 1986 U.S. Dist. LEXIS 18325
CourtDistrict Court, D. Kansas
DecidedOctober 30, 1986
Docket82-2282-K
StatusPublished
Cited by12 cases

This text of 66 B.R. 582 (Rajala v. Allied Corp.) is published on Counsel Stack Legal Research, covering District Court, D. Kansas primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Rajala v. Allied Corp., 66 B.R. 582, 2 U.C.C. Rep. Serv. 2d (West) 1203, 1986 U.S. Dist. LEXIS 18325 (D. Kan. 1986).

Opinion

MEMORANDUM AND ORDER

PATRICK F. KELLY, District Judge.

This case is before the court on defendant’s motion for summary judgment. This action is brought by the trustee in bankruptcy, Eric C. Rajala, for General Poly Corporation, against Allied Corporation for breach of contract, breach of fiduciary duty, conversion, and fraud. For the reasons set forth herein, defendant’s motion for summary judgment will be denied, except as to Count XIII, alleging an overall scheme to defraud.

The facts in this lawsuit are largely disputed. In 1978, Clayton A. Walker and Hans H. Traver developed plans to form the company which later became General Poly. Their plan was to form a company which would engage in the business of converting high density polyethylene (HDPE) into film and film products such as plastic milk bottles, large drums, pails, housewares, and storage containers. Conversion of “film grade” HDPE into film and film products is accomplished by a method known as “extrusion”. Special extrusion equipment is needed for this process. Some HDPE has a higher molecular weight than other HDPE and is referred to as high molecular weight high density polyethylene (HMWHD). Film products made from prime HMWHD film grade resins have significant strength advantages over products made from ordinary HDPE or from traditional low density polyethylene resins. Also, due to its strength advantages, thinner film can be produced from HMWHD resins, offering a producer of bags and film the potential for more profit.

At the time that Walker and Traver began making plans for General Poly, Walker was the principal shareholder of Yinylplex, a company engaged in the manufacture and sale of plastic pipe. Mr. Traver was the principal shareholder of PeruPlast, a company in Lima, Peru, engaged in the manufacture and sale of various plastic products, including HMWHD film and bags.

In and prior to 1978, HMWHD film grade resin was widely used in Japan, western European countries, and South America for the production of film and bags, but such HMWHD products had not penetrated the market in the United States as there were no companies in the United States which were producing and selling commercial quantities of prime HMWHD film grade resin. At that time, a German chemical company known as Hoechst, A.G. was producing an HMWHD film grade resin which was regarded as the industry standard. During 1978 through 1980, Hoechst, A.G. imported only limited quantities of its 9255F HMWHD film grade resin into the United States. This resin was being sold in the United States at a premium price due in part to higher costs of the raw materials for the resin in Europe and the absence of any other prime HMWHD film grade resin in commercial quantities in the United States. Therefore, for General Poly to buy resin exclusively from European suppliers would have been too costly, so General Poly sought to find a domestic company which could develop and produce a resin equal in quality to that produced in Europe.

In 1978, Allied Corporation began studying the possibility of producing film grade *585 HMWHD resin in the United States. Allied is a New York corporation which is, and at all relevant times was, a manufacturer and supplier of HDPE resin. In order for Allied to successfully develop the HMWHD resin, it needed access to state of the art, specialized extrusion equipment and experienced extrusion operators. In 1978, Allied did not have this specialized equipment, which was extremely costly, nor did it have any right of access to any such equipment in any location in the United States.

In October of 1978, a representative of Allied met with General Poly’s promoters. Allied informed the promoters it was engaged in a film development program and was pursuing development and commercial production of an HMWHD film grade resin. General Poly’s promoters advised Allied of their tentative plans to establish a film and bag plant in the Kansas City, Missouri area, which would be dedicated to the production of HMWHD film and bags, .and they stated they were seeking a domestic supply of resin. At that time it was arranged that the General Poly promoters would later meet with Allied’s Pat Snell, who headed the HMWHD film development program, regarding the status of that program and Allied’s progress in development of an HMWHD film grade resin. A few days later, Allied tentatively indicated to Traver that Allied could furnish Traver with a “developmental resin” for Traver to evaluate at his PeruPlast Plant. An Allied interoffice memorandum reporting on this meeting stated it would be a “great benefit” for Allied to be “in on the ground floor” with the planned General Poly operation, and that the “only concern at the moment [was] whether or not ... [Allied] could put together a suitable sample for the Lima, Peru operation to get this thing started.” When Allied’s Pat Snell received a copy of this memorandum, he added a handwritten note stating that the developmental resin which Allied could send to Traver’s PeruPlast Plant was a commercial HMWHD film grade resin produced and sold in Europe by a Belgian company named Solvay et Cie.

On January 10, 1979, Walker and Traver met with several of Allied’s representatives. According to plaintiff, Walker and Traver told the Allied representatives that they needed to have a domestic supply of HMWHD film grade resin equivalent to or better than the industry leader, Hoechst 9255F, and that they would not form the proposed film and bag company without obtaining such a source. They also indicated the proposed company would need to have financial assistance from Allied. Walker requested that Allied either purchase some of the bonds or guarantee the bond issue. Traver indicated that General Poly would provide technical assistance to Allied by evaluating Allied’s experimental HMWHD film grade resins at the Peru-Plast Plant, which had the needed specialized extrusion equipment and experienced operators. Traver and Walker indicated their proposed plant could be in operation toward the end of 1979. According to plaintiff, Allied’s representatives stated that Allied was already at work on an HMWHD film grade resin development program, that Allied possessed the necessary catalyst, and that it only needed to tinker with the catalyst in order to perfect the resin. Allied stated it needed access to the specialized extrusion line design for HMWHD film, which Allied did not have. Allied further stated that with the availability of the PeruPlast Plant, Allied’s timing for completion of the development program would coincide with the promoters’ timing for the commencement of manufacturing operations toward the end of 1979, and that Allied could then have a prime HMWHD film grade resin available in commercial quantities for the proposed General Poly Plant. As to offering financial assistance, Allied stated that rather than backing the bond issue it could provide financial assistance to the proposed General Poly operation in the form of extended credit terms.

The parties concluded their meeting by agreeing to commence a joint development program, under which General Poly would provide extrusion technology and assist- *586

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
66 B.R. 582, 2 U.C.C. Rep. Serv. 2d (West) 1203, 1986 U.S. Dist. LEXIS 18325, Counsel Stack Legal Research, https://law.counselstack.com/opinion/rajala-v-allied-corp-ksd-1986.