Cooper Power Systems, Inc. v. Union Carbide Chemicals & Plastics Co.

123 F.3d 675, 1997 WL 567272
CourtCourt of Appeals for the Seventh Circuit
DecidedSeptember 15, 1997
DocketNos. 95-3083, 95-3084
StatusPublished
Cited by14 cases

This text of 123 F.3d 675 (Cooper Power Systems, Inc. v. Union Carbide Chemicals & Plastics Co.) is published on Counsel Stack Legal Research, covering Court of Appeals for the Seventh Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Cooper Power Systems, Inc. v. Union Carbide Chemicals & Plastics Co., 123 F.3d 675, 1997 WL 567272 (7th Cir. 1997).

Opinion

RIPPLE, Circuit Judge.

Premium Finishes, Incorporated (“PFI”) purchased a resin from Union Carbide Chemicals & Plastics Company, Incorporated (“Carbide”) in order to manufacture a paint that PFI then sold to Cooper Power Systems, Incorporated (“Cooper”). - Cooper incurred substantial costs when the paint failed after it was used to coat thousands of electrical transformers. Cooper sued PFI and Carbide to recover its costs alleging several state law theories. PFI cross-claimed against Carbide for indemnity and filed a separate action alleging its own state law theories of recovery. After the actions were consolidated, the district court granted summary judgment to Carbide and certified that judgment as final under Rule 54(b) of the Federal Rules of Civil Procedure.1 We af[679]*679firm in part, reverse in part and remand the ease for further proceedings.

I

BACKGROUND

We take the facts in the light most favorable to PFI and Cooper. Carbide manufactures resins that are used by producers of paints and protective coating systems such as PFI. As early as 1959, Carbide and Ron Savin, the owner of PFI, developed a working relationship. PFI would buy a large quantity of resins from Carbide on an annual basis. Carbide’s technical personnel assisted PFI in developing a coating called Weather-cote-T by providing start-up formulas and technical assistance. Subsequently, in 1980, Carbide introduced a new resin, VYES, to the market. Carbide promoted VYES to its customers, including Savin. It represented that VYES could be used to replace conventional vinyl resins and that the new resin was suitable for all kinds of weather. Beginning in 1982 PFI began incorporating VYES into Weathercote-T. Carbide was aware that PFI’s customers used Weathercote-T to coat electrical transformers. Carbide maintained a relationship with PFI by providing technical assistance and formula recommendations; Carbide also provided assistance to PFI when it had a temperature problem with the coating. In'1984 PFI received an odorous, discolored batch of VYES and returned the shipment. Carbide assured PFI that nothing was wrong with VYES and that the shipment was an aberration. Carbide assured Savin, in response to his concerns about the field equipment that had been painted with Weathercote-T, that VYES met Carbide’s standards. PFI never passed along to Cooper Carbide’s reassurances and representations of VYES’ quality.

Cooper was one of PFI’s customers. Cooper painted thousands of electrical transformers with Weathercote-T. In 1986 or 1987 it began experiencing numerous field failures and learned that Weathercote-T contained VYES. The paint failed in the field apparently because it could not withstand high temperatures. The paint blistered and delaminated, thereby exposing the transformers to corrosion by the elements. Cooper incurred high costs in correcting the problem by sandblasting and repainting the equipment. Cooper says that, before the field failures, it had continuously sought assurances from PFI that PFI would inform Cooper of any changes in the formulation of Weathercote-T. PFI assured Cooper that there were no such changes. PFI never disclosed any change because it was not informed of any problems with VYES by Carbide. Carbide, in fact, had been struggling with a color instability problem, the equivalent of a thermal instability problem. In early 1984, over 94% of the most recent batch of VYES failed Carbide’s minimum product specifications. Carbide never informed any of its customers of the problems it was having. It did not disclose any problem in its 1980, 1984 or 1985 product literature.

Savin met with the representatives of another paint-producing company in 1989. He learned from them that they had been experiencing the same problems with their coatings. One of the representatives also told Savin that a Carbide representative had admitted to him that there was a problem with VYES. Carbide, in response to Savin’s inquiry, continued to deny any problem. Carbide asserts that there is no evidence that the' failures in VYES caused the delamination and blistering of Weathereote-T.

Carbide and PFI eventually agreed to discuss a settlement. They entered into an agreement tolling the statute of limitations for four months. PFI then filed its complaint in the United States District Court for the Southern District of Ohio, alleging negligence and breach of contract and warranty. On October 8, 1991, PFI entered into a second tolling agreement with Carbide and voluntarily dismissed its claims. PFI refiled on [680]*680September 30,1992; this time it alleged only-breach of contract and breach of warranty. In 1991 Cooper filed suit against PFI in Wisconsin state court alleging breach of contract, breach of warranty, strict liability, negligence and misrepresentation. PFI removed the action to the United States District Court for the Eastern District of Wisconsin. Cooper’s claimed damages included repair costs, lost sales, lost profits, a diminished goodwill and business reputation, and money. PFI cross-claimed for indemnification asserting that Carbide was primarily Hable for the alleged damages. PFI’s lawsuit against Carbide was transferred to the Eastern District of Wisconsin and consoKdat-ed with Cooper’s action. The district court granted summary judgment to Carbide on all the claims against it. The court later entered a Rule 54(b) judgment. Cooper and PFI now appeal.

II

DISCUSSION

A. Cooper’s Claims Against Carbide

1. Breach of contract and warranty

Cooper admits that it never dealt directly with Carbide and that it was never a party to any contract with Carbide. Cooper, therefore, is claiming that it was a third-party beneficiary to the contract between PFI and Carbide.2 A person cannot assert contractual rights as a third-party beneficiary to a contract unless that person was an intended beneficiary of the contract. See TRINOVA Corp. v. Pilkington Bros., 70 Ohio St.3d 271, 638 N.E.2d 572, 576-77 (1994) (quoting Restatement (Second) of Contracts § 302 (1981)); Mercado v. Mitchell, 83 Wis.2d 17, 264 N.W.2d 532, 538 (1978) (stating that third party “must show that the contract was entered into by the parties directly and primarily for his benefit”). Under Ohio law, “there must be evidence, on the part of the promisee, that he intended to directly benefit a third party, and not simply that some incidental benefit was conferred on an unrelated party by the promisee’s actions under the contract. There must be evidence that the promisee assumed a duty to the third party.” TRINOVA Corp., 638 N.E.2d at 577.

The PFI-Carbide contract was clearly not entered into for the benefit of Cooper. Cooper’s arguments to the contrary all boil down to an assertion that Carbide knew that PFI was selHng paint containing VYES to Cooper or companies like Cooper. Yet the fact that a seller knows that an intermediate buyer of its products wiH immediately resell the product is not sufficient to make the ultimate buyer an intended beneficiary of the original sales contract. Commonwealth Propane Co. v. Petrosol Int’l, Inc., 818 F.2d 522, 531-32 (6th Cir.1987) (Ohio law).

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
123 F.3d 675, 1997 WL 567272, Counsel Stack Legal Research, https://law.counselstack.com/opinion/cooper-power-systems-inc-v-union-carbide-chemicals-plastics-co-ca7-1997.