Bishop v. Gosiger, Inc.

692 F. Supp. 2d 762, 2010 U.S. Dist. LEXIS 28922, 2010 WL 809847
CourtDistrict Court, E.D. Michigan
DecidedMarch 4, 2010
DocketCivil 09-12182
StatusPublished
Cited by14 cases

This text of 692 F. Supp. 2d 762 (Bishop v. Gosiger, Inc.) is published on Counsel Stack Legal Research, covering District Court, E.D. Michigan primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Bishop v. Gosiger, Inc., 692 F. Supp. 2d 762, 2010 U.S. Dist. LEXIS 28922, 2010 WL 809847 (E.D. Mich. 2010).

Opinion

OPINION AND ORDER REJECTING MAGISTRATE JUDGE MAJZOUB’S REPORT AND RECOMMENDATION [30] AND GRANTING DEFENDANT’S MOTIONS TO STAY PENDING ARBITRATION [8 AND 23]

JOHN FEIKENS, District Judge.

I. INTRODUCTION

On June 5, 2009, Plaintiff Steve M. Bishop (“Bishop”) filed a twelve-count Complaint against Defendant Gosiger, Inc. (“Gosiger”), an Ohio corporation, for alleged underpayment and nonpayment of commissions. (Dkt. 1). Bishop began working as a distributor for Gosiger in 2001 pursuant to an oral agreement. (First Am. Compl'., Dkt. 12, ¶ 7). In 2003, Bishop and Gosiger memorialized their relationship in a “Distributor Contract.” (First Am. Compl., Dkt. 12, ¶ 7).

The Distributor Contract established the general relationship, duties and responsibilities of the parties, and provided (among other things) that Bishop was a distributor for all Designated Products described on Schedule B, attached thereto, “as the same may be amended from time to time by the parties.” The Distributor Contract also defined important terms governing the method by which Bishop would earn commissions (e.g., Commission, Completed Order, Net Selling Price), and provided a calculation for splitting commissions among multiple representatives, in limited circumstances. The Distributor Contract also includes terms relating to confidential information, indemnity between the parties, dispute resolution, choice-of-law, termination of the agreement, and modification of the agreement.

The following provisions of the Distributor Contract are relevant to this Motion:

Section 7.1, governing Resolution of Disputes:

[Gosiger] and [Bishop] shall act in good faith to seek the resolution of all differences arising under this Agreement.... If mediation is not successful in resolving the dispute, the dispute shall be submitted to arbitration before the American Arbitration Association in Dayton, Ohio in accordance with its Commercial Arbitration Rules....

Section 1.5, governing Designated Products:

*765 “Designated Products” are the products exclusively assigned to [Bishop] for sales in the Territory as described on the attached Schedule B, as the same may be amended from time to time by the parties.

Section 10.1, governing Modifications:

... Schedules A, B, C and D may be modified by [Gosiger] on thirty (30) days prior notice to [Bishop]. This Agreement otherwise may not be amended or modified in any respect except by written instrument signed by a duly authorized officer or representative of [Bishop] and by a duly authorized officer of [Gosiger].

Section 124, governing Notice:

Any notice, request, demand, or other communication made pursuant to this Agreement shall be in writing and shall be mailed, sent by private commercial carrier, transmitted by telecopy (fax) or personally delivered to the other party....

Section 12.5, governing Choice of Law:

This Agreement shall be deemed to be made and entered into in the State of Ohio and shall be governed and construed under and in accordance with the laws of the State of Ohio.

Schedule B, governing Commissions (Designated Product, and Commission rate):

Euroturn Multi-spindle Automatics 10%

In his Complaint (and an Affidavit opposing Defendant’s Motion), Bishop explains that, in or around February 2005, he and Gosiger wanted to “compliment their representation” of the Euroturn MultiSpindle machine line. To that end, Bishop contacted BTB Transfer s.r.l, an Italian company, regarding Bishop and Gosiger representing BTB in the United States. Gosiger became BTB’s North American distributor in 2006. Bishop contends that Kevin Hayes, then-president of Gosiger’s import division, assured Bishop that he would receive 5% commission on his sale of BTB machines.

For years while working under the Distributor Contract, Bishop called upon a wholly-owned subsidiary of Caterpillar, Inc., known as Anchor Coupling, Inc. (“Anchor”). Anchor needed to purchase machines to produce “stems” and “shells”— parts used on hydraulic lines, hoses, and systems. Bishop describes numerous efforts to sell Euroturn Multi-spindle machines to Anchor, but none resulted in a sale. Once authorized to sell BTB machines, Bishop advised Anchor of the availability of BTB’s rotary machines for the manufacture of stems and shells. Anchor was interested in receiving a quote for both Euroturn Multi-Spindle and BTB rotary machines. Bishop advised Hayes of Anchor’s interest. In his Complaint, Bishop explains:

Bishop told Mr. Hayes that he expected to receive a commission if any BTB machines were sold to [Anchor]. Mr. Hayes assured Bishop that if BTB rotary machines were sold to [Anchor], Bishop would be paid a commission of 5 percent of the sale price and if Euroturn Multi-Spindle machines were sold to [Anchor], Bishop would receive his standard commission for Euroturn sales. (First Am. Compl., ¶ 26).

On February 17, 2007, Bishop and a representative of Gosiger called upon Anchor to present a quote on BTB machines for the manufacture of stems and shells. Throughout 2007 and 2008, Anchor and Gosiger negotiated Anchor’s purchase of BTB machines for delivery to facilities in Michigan and Mississippi. Bishop believes these negotiations culminated in purchase orders for 16 machines, with 4 already having been delivered in Michigan, and the remaining 12 to be delivered by early 2010 in Mississippi.

*766 Bishop claims that in April, 2007, Hayes assured Bishop that he would receive “the full five percent commission and that there were no dealers or other sales representatives in either Mississippi or Michigan with whom Bishop would have to split his commission.” (First Am. Compl. ¶ 33).

On June 14, 2007, at Bishop’s request, Hayes sent an email to Bishop, stating in pertinent part:

Please take this letter as our confirmation of protection for Bishop & Associates on the present Anchor Coupling BTB program. This agreement is specific to this program only and will extend to the end of calendar year 2007. Any required discounting will be shared at a negotiated rate and for any machines delivered outside the Michigan territory consideration must be given to the dealer who is responsible for the territory in which the machine is to be installed. As per our standard contractual terms, this would equate to a split of 2/3 of the agreed upon commission to Bishop & Associates and 1/3 to the recipient of the machine. Your commission prior to any required split or discount will be 5% of the net sales price of the machines excluding tax, duty and freight charges and will be payable within 45 days of receipt of full payment of the customer.

Bishop contends that the “specific to this program” language establishes that the Anchor Coupling BTB program was a separate and distinct oral contract, rather than a modification of the Distributor Contract an addition to Schedule B to define the commission (5%) for the newly Designated Products (BTB rotary machines)).

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Heit v. Marano
E.D. Michigan, 2025
Pelichet v. Gordon
E.D. Michigan, 2019
Stanley v. Expressjet Airlines, Inc.
356 F. Supp. 3d 667 (E.D. Michigan, 2018)
Arndt v. Ford Motor Co.
247 F. Supp. 3d 832 (E.D. Michigan, 2017)
Willacy v. Marotta
683 F. App'x 468 (Sixth Circuit, 2017)
HPD, LLC v. Tetra Technologies, Inc.
2012 Ark. 408 (Supreme Court of Arkansas, 2012)
Turi v. Main Street Adoption Services, LLP
633 F.3d 496 (Sixth Circuit, 2011)
Amway Global v. Woodward
744 F. Supp. 2d 657 (E.D. Michigan, 2010)

Cite This Page — Counsel Stack

Bluebook (online)
692 F. Supp. 2d 762, 2010 U.S. Dist. LEXIS 28922, 2010 WL 809847, Counsel Stack Legal Research, https://law.counselstack.com/opinion/bishop-v-gosiger-inc-mied-2010.