Norma U.S. Holding LLC v. Xingtai Jinwo Commercial Trading Co., Ltd.

CourtDistrict Court, E.D. Michigan
DecidedMay 5, 2026
Docket2:25-cv-13619
StatusUnknown

This text of Norma U.S. Holding LLC v. Xingtai Jinwo Commercial Trading Co., Ltd. (Norma U.S. Holding LLC v. Xingtai Jinwo Commercial Trading Co., Ltd.) is published on Counsel Stack Legal Research, covering District Court, E.D. Michigan primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Norma U.S. Holding LLC v. Xingtai Jinwo Commercial Trading Co., Ltd., (E.D. Mich. 2026).

Opinion

IN THE UNITED STATES DISTRICT COURT EASTERN DISTRICT OF MICHIGAN SOUTHERN DIVISION

NORMA U.S. HOLDING LLC, Case No. 2:25-cv-13619-RJW-CI

Plaintiff, Hon. Robert J. White Mag. Curtis Ivy, Jr. v.

XINGTAI JINWO COMMERCIAL TRADING CO., LTD.,

Defendant.

OPINION AND ORDER GRANTING NORMA’S MOTION FOR A TEMPORARY RESTRAINING ORDER (ECF No. 4)

This is a patent infringement case in which Plaintiff Norma U.S. Holding LLC (“Norma”) alleges that Defendant Xingtai Jinwo Commercial Trading Co., Ltd. (“Jinwo”) infringes U.S. Patent No. 7,520,539 (the “’539 Patent”) for a “Pipe Clamp with Gasketed Center Rib.” Presently before the Court is Norma’s motion for a temporary restraining order, which Norma asks the Court to issue without notice to Jinwo, arguing that immediate, ex parte injunctive relief is necessary to fully protect Norma’s patent rights. ECF No. 4. Pursuant to Local Rule 7.1(f)(2), the Court will decide Norma’s motion without a hearing. E.D. Mich. LR 7.1(f)(2). For the reasons stated in this Opinion and Order, the Court GRANTS Norma’s motion for a temporary restraining order.

I. PROCEDURAL HISTORY On November 13, 2025, Norma filed a Complaint for patent infringement against Jinwo, alleging that Jinwo infringes the ’539 Patent in connection with sales of an infringing copy of a best-selling Norma pipe clamp covered by the ’539 Patent.

ECF No. 1. On the same day, Norma filed its present motion, asking the Court to issue an ex parte temporary restraining order under Federal Rule of Civil Procedure 65(b). ECF No. 4.

II. BACKGROUND This case involves pipe clamps commonly used to connect pipes in vehicle exhaust systems. In addition to providing pull-apart strength and ease of disassembly for maintenance and repair, the pipe clamps feature an improved design for sealing

against exhaust gas leakage at the connection between two pipes. A. ’539 Patent The ’539 Patent, titled “Pipe Clamp with Gasketed Center Rib,” was issued by the United States Patent and Trademark Office (the “USPTO”) on April 21, 2009. The ’539 Patent has sixteen claims, including independent Claims 1, 14, and 16. In

the Complaint, Norma alleges that Jinwo infringes at least independent Claims 1 and 16 (the “asserted claims”). For purposes of demonstrating a likelihood of infringement in support of its motion for a temporary restraining order, Norma focuses on Claim 1. Claim 1 of the ’539 Patent recites:

1. A pipe clamp for connecting two tubular bodies, comprising: a band extending circumferentially and continuously from a first end to a second end and having a pair of axial ends, said band including a radially protruding rib located inwardly of said axial ends and extending continuously at least part way between said first and second ends, wherein said first and second ends of said band comprise radially extending flanges; a tightening mechanism connected to said flanges to draw said first and second ends toward and away from each other for tightening and loosening of said band; a split sleeve disposed within said band and located at least within said rib such that, when tightened, said band compresses said sleeve via direct contact between a radially inward surface of said rib and an outer surface of said sleeve, said split sleeve extending circumferentially from a first mating end to a second mating end; and a gasket disposed radially within said sleeve such that said gasket is located at least partially within said rib.

’539 Patent 10:53-11:5. As set forth in the claim language, Claim 1 recites a pipe clamp featuring a “gasketed center rib” design. As the basic claim elements, the claim language recites four components: (a) a “band,” which includes a “radially protruding rib” and “radially extending flanges”; (b) a “tightening mechanism” connected to the flanges; (c) a “split sleeve” within the rib, which includes a “first mating end” and a “second mating end”; and (d) a “gasket” within the sleeve. An embodiment of the recited pipe clamp is shown in Figure 5 of the □□□□ Patent, reproduced below. As shown, the pipe coupler (200)! has a four-component construction based on a band (202). The band (202) is made by forming a flat band of sheet steel into an open loop, and includes a pair of radially extending flanges (214, 216) at its ends, and a radial protruding rib (230) along its length. In addition to the band (202), the pipe coupler (200) includes an external tightening mechanism (204) connected to the flanges (214, 216), as well as an internal split sleeve (206) within the rib (230), and an internal gasket (208) within the split sleeve (206). 216 284 204 214 NVQ ise g WL 288 (Yass: YARIS 4 200 294 CY ES mn Ee □□ 206

20 234 230 234 Figure 5

' The ’539 Patent explains that the term “pipe clamp” refers to both “band clamps” and “pipe couplers.” /d. 3:19-20. The two products include the same basic components, but a band clamp “clamps around overlapping pipes connected in a telescopic fashion,” while a pipe coupler “fastens around adjoining pipes connected in an end-to-end manner.” /d. 3:15-19.

The tightening mechanism (204) is configured to draw the ends of the band (202) toward (and away) from one another by the flanges (214, 216) to tighten (and

loosen) the band (202). The split sleeve (206) and the gasket (208) include angularly offset pairs of mating ends (222, 224 and 270, 272). When the band (202) is fully tightened over the connection between two pipes, the mating ends (222, 224 and

270, 272) of the split sleeve (206) and the gasket (208) are drawn into sealing engagement to provide a gas-tight seal. B. Norma’s Factual Allegations2 Plaintiff Norma is a Delaware company with a place of business in Auburn

Hills, Michigan. ECF No. 1, PageID.1 (Compl. ¶ 1). Norma sells pipe clamps, including a pipe clamp covered by the ’539 Patent (the “patented pipe clamp”). Id., PageID.5 (Compl. ¶ 15). The patented pipe clamp, known as the 55W pipe clamp, is exceedingly popular and one of Norma’s best-selling pipe clamps, and Norma has

achieved significant commercial success in selling the patented pipe clamp. Id.; ECF No. 7, PageID.103 (Lombardi Decl. ¶¶ 4-5). Defendant Jinwo is a Chinese entity with a place of business in Xingtai City,

Hebei Province, China. Id., PageID.1 (Compl. ¶ 2). Jinwo sells several pipe clamps

2 The Court takes the following information from the Complaint (ECF No. 1), Norma’s motion for a temporary restraining order (ECF No. 4), and supporting declarations from Jennifer Bossory, Norma’s Corporate Counsel (ECF No. 5), and Jeff Lombardi, Norma’s Vice President of Business Development, Industrial Applications (ECF No. 7). on the Jinwo Parts website.3 ECF No. 4, PageID.73 (Mot. p. 17). Norma alleges that Jinwo infringes the ’539 Patent in connection with sales of a pipe clamp designated

as the “Jinwo DPF Filter Clamp Kit And Gasket Kit Directly Replaceable With OE Clamps And Gaskets” (the “accused pipe clamp”).4 ECF No. 1, PageID.5-6 (Compl. ¶ 16). In addition to selling the accused pipe clamp to United States customers on

the Jinwo Parts website, Jinwo sells to resellers, who sell the accused pipe clamp to United States customers on other ecommerce platforms. ECF No. 4, PageID.57 (Mot. p. 1). Jinwo’s accused pipe clamp is a virtual copy of Norma’s patented pipe clamp.

Id. Norma alleges that, with knowledge of Norma’s patent rights, and without Norma’s authorization or consent, Jinwo copied the patented pipe clamp to capitalize on Norma’s success, and will continue selling the accused pipe clamp unless

enjoined by the Court. ECF No. 1, PageID.9-10 (Compl. ¶¶ 37-38, 41); ECF No. 4, PageID.60 (Mot. p. 4); ECF No. 5, PageID.99 (Bossory Decl. ¶ 4).

Free access — add to your briefcase to read the full text and ask questions with AI

Related

ACUMED LLC v. Stryker Corp.
551 F.3d 1323 (Federal Circuit, 2008)
Abbott Laboratories v. Andrx Pharmaceuticals, Inc.
452 F.3d 1331 (Federal Circuit, 2006)
Microsoft Corp. v. i4i Ltd. Partnership
131 S. Ct. 2238 (Supreme Court, 2011)
Robert Bosch LLC v. Pylon Mfg. Corp.
659 F.3d 1142 (Federal Circuit, 2011)
Celsis in Vitro, Inc. v. CellzDirect, Inc.
664 F.3d 922 (Federal Circuit, 2012)
Southwall Technologies, Inc. v. Cardinal Ig Company
54 F.3d 1570 (Federal Circuit, 1995)
Mikohn Gaming Corporation v. Acres Gaming, Inc.
165 F.3d 891 (Federal Circuit, 1998)
Douglas Dynamics, LLC v. Buyers Products Co.
717 F.3d 1336 (Federal Circuit, 2013)
I4i Ltd. Partnership v. Microsoft Corp.
598 F.3d 831 (Federal Circuit, 2010)
Trebro Manufacturing, Inc. v. Firefly Equipment, LLC
748 F.3d 1159 (Federal Circuit, 2014)

Cite This Page — Counsel Stack

Bluebook (online)
Norma U.S. Holding LLC v. Xingtai Jinwo Commercial Trading Co., Ltd., Counsel Stack Legal Research, https://law.counselstack.com/opinion/norma-us-holding-llc-v-xingtai-jinwo-commercial-trading-co-ltd-mied-2026.