Colorado § 8-20-225 Measuring device - sealing - approval of prover and procedure

Colorado Statutes

§ 8-20-225 — Measuring device - sealing - approval of prover and procedure

Colorado § 8-20-225

Title 08Labor and

Art.Fuel Products

This text of Colorado § 8-20-225 (Measuring device - sealing - approval of prover and procedure) is published on Counsel Stack Legal Research, covering Colorado primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Colo. Rev. Stat. § 8-20-225 (2026).

Text

(1)No person, or agent or employee of any person, shall use any meter or mechanical device for the measurement of oil, gasoline, or liquid fuels unless the same has been proved in a manner acceptable to the director of the division of oil and public safety and sealed as correct by the director or one of the director's deputies. The director and the director's deputies are further authorized, if any such meter or mechanical device fails to comply with any of the provisions of this part 2, to seal the meter or mechanical device in a manner that prohibits its use until such meter or mechanical device complies with all of the provisions of this part 2, at which time the seal shall be removed by the director or the director's deputies.

(2)The specifications, tolerances, and other tec

Free access — add to your briefcase to read the full text and ask questions with AI

(1) No person, or agent or employee of any person, shall use any meter or
mechanical device for the measurement of oil, gasoline, or liquid fuels unless the
same has been proved in a manner acceptable to the director of the division of oil
and public safety and sealed as correct by the director or one of the director's
deputies. The director and the director's deputies are further authorized, if any such
meter or mechanical device fails to comply with any of the provisions of this part 2,
to seal the meter or mechanical device in a manner that prohibits its use until such
meter or mechanical device complies with all of the provisions of this part 2, at
which time the seal shall be removed by the director or the director's deputies.

(2) The specifications, tolerances, and other technical requirements
published in the NIST handbook 44, Specifications, Tolerances, and Other
Technical Requirements for Commercial Weighing and Measuring Devices, NIST
handbook 130, Uniform Laws and Regulations in the area of legal metrology and
engine fuel quality, and supplements thereto or revisions thereof, shall apply to
the provisions of this article, except as modified or rejected by this article or any
rule promulgated pursuant to this article.

Legislative History

Source: L. 31: p. 601, � 26. CSA: C. 118, � 23. L. 41: p. 588, � 23. CRS 53: � 100-2-25. C.R.S. 1963: � 100-2-25. L. 67: p. 150, � 1. L. 73: p. 1067, � 4. L. 86: Entire section amended, p. 510, � 4, effective July 1. L. 2001: (1) amended, p. 1118, � 18, effective June 5. L. 2003: (1) amended, p. 1824, � 8, effective May 21. L. 2005: (2) amended, p. 1347, � 17, effective August 8.