Textile Productions, Inc. v. Mead Corporation and Fiber Trim Sewing Company

134 F.3d 1481
CourtCourt of Appeals for the Federal Circuit
DecidedMarch 24, 1998
Docket97-1245
StatusPublished
Cited by201 cases

This text of 134 F.3d 1481 (Textile Productions, Inc. v. Mead Corporation and Fiber Trim Sewing Company) is published on Counsel Stack Legal Research, covering Court of Appeals for the Federal Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Textile Productions, Inc. v. Mead Corporation and Fiber Trim Sewing Company, 134 F.3d 1481 (Fed. Cir. 1998).

Opinion

RADER, Circuit Judge.

The United States District Court for the Eastern District of Michigan dismissed Textile Production, Inc.’s (Textile’s) complaint with prejudice in favor of The Mead Corporation (Mead) and Fiber Trim Sewing Company (Fiber Trim). Because Textile is not an exclusive licensee and therefore has no standing to sue for patent infringement, this court affirms the district court’s dismissal of Textile’s infringement claim. However, because Textile may have also asserted a claim for breach of contract against Mead, this court vacates the district court’s dismissal of the complaint and remands with instructions.

I.

During the late 1980s, employees of Mead and Textile collaborated on solving a problem for Ford Motor Company, one of Mead’s customers. During assembly of its cars, Ford needed to pass a large bundle of wires through a narrow opening in the interior control panel and then quickly separate the wires for installation. Employees at Mead and Textile invented a sock-like spandex harness that allowed Ford to perform this operation more efficiently. In October 1989, Textile filed a United States patent application on behalf of the inventors of the harness.

In February 1990, while the patent application was still pending, Textile and Mead executed a General Agreement and a Purchase Agreement. Under the General Agreement, the parties agreed to split the costs of prosecuting the application and to concurrently execute the Purchase Agreement. The General Agreement also contained two other relevant provisions:

5. Upon conclusion of the examination of the PATENT APPLICATION, [Textile] shall assign its entire interest in and to any and all patents derived therefrom to [Mead],
6. Should any aforesaid assigned patent be proposed by [Mead] for reissue or reexamination, or become the subject of litigation, [Mead] shall give reasonable no *1483 tice to [Textile] and shall allow [Textile] to participate, through its ... counsel, in any such proceeding on any reasonable basis directed to protecting [Textile’s] interests therein and in this Agreement. All legal expenses incurred by either party relating to this paragraph shall be shared on an equal basis by both [Textile] and [Mead].

The Purchase Agreement provided that Mead would “purchase” and Textile would “manufacture and supply” 100% of Mead’s “requirements” for the wire harness sock product. Textile was to be Mead’s “exclusive source” and Mead was to be Textile’s “sole customer” for the “PRODUCT.” The Purchase Agreement defined the “PRODUCT” as anything “covered within the literal description found in any then currently existing claim” of the pending U.S. patent application “or any U.S. patent which may be granted thereon.” The Purchase Agreement also had a “second source contingency” provision. This provision provided:

16. Second Source Contingency, (a) If [Textile] cannot or shall not meet [Mead’s] reasonable delivery requirements for the PRODUCT, then [Mead] shall have the right to obtain elsewhere (for the duration of [Textile’s] failure to supply) the PRODUCT in the amount of any shortfall in the PRODUCT between what [Textile] can supply and what [Mead] requires; provided however, [Textile] shall be given (i) reasonable notice of [Mead’s] intent to seek a second source, and (ii) an opportunity to either expand its own facilities within a reasonable time, or subcontract for the additional required capacity, and thus fully meet [Mead’s] demands....
(b) In the event that a customer of [Mead] requires a second source of supply of the PRODUCT, [Mead] has the right to grant the necessary licenses so that the customer shall have the right to obtain the PRODUCT from a source other than [Textile] and [Mead] shall split with [Textile] any royalty fees received from such other source by [Mead]....

The Purchase Agreement set its own term as the greater of (1) three years, (2) the pen-dency of the U.S. patent application, or (3) the term of any last-to-expire U.S. patent that issued.

On May 21,1991, the application issued as U.S. Patent No. 5,016,859 (“the ’859 patent”). Under the General Agreement, Textile assigned the patent to Mead. The parties performed satisfactorily under the Purchase Agreement until roughly July 1992, when Textile’s ownership changed hands. At that point, Mead claims that Ford began to reject Textile’s harnesses with increasing frequency. Mead also asserts that Textile did little or nothing to eliminate the defects. Textile responds that it was doing the best it could.

In March 1995, without notifying Textile, Mead contacted Fiber Trim about manufacturing harnesses. Mead purchased part of its requirements from Fiber Trim until September 1995. At that point, Textile discovered that Fiber Trim was manufacturing the harnesses. In the ensuing dispute, Mead notified Textile that it was suspending performance under the Purchase Agreement.

Textile filed suit against Mead and Fiber Trim, alleging that Textile was an exclusive licensee of the ’859 patent with an exclusive nationwide license to make the invention and that Mead and Fiber Trim had infringed this right. Textile filed a motion for partial summary judgment of liability for breach of contract against Mead and for patent infringement against both Mead and Fiber Trim. Mead and Fiber Trim filed a motion for summary judgment challenging Textile’s standing to assert patent infringement. The district court found that Textile did not have standing to sue for patent infringement as an exclusive licensee, denied all other motions as moot, and dismissed the complaint with prejudice. Textile appeals.

II.

The question of standing to sue for patent infringement is one which this court reviews de novo. See Rite-Hite Corp. v. Kelley Co., 56 F.3d 1538, 1551, 35 USPQ2d 1065, 1074 (Fed.Cir.1995) (in banc). Only a patentee may bring an action for patent infringement. See 35 U.S.C. § 281 (1994) (“A patentee shall have remedy by civil action for infringement of his patent.”). Title 35 defines “patentee” as the party to whom the *1484 patent issued or any successors in title to the patent. See 35 U.S.C. § 100(d) (1994). A licensee is not entitled to bring suit in its own name as a patentee, unless the licensee holds “all substantial rights” under the patent. See Vaupel Textilmaschinen KG v. Meccanica Euro Italia S.P.A., 944 F.2d 870, 875, 20 USPQ2d 1045, 1048-49 (Fed.Cir.1991). Such a licensee is in effect an “assignee” and therefore a patentee. See id. at 874-75.

Thus, although a patentee has standing to sue in its own name, an exclusive licensee that does not have all substantial rights has standing to sue third parties only as a co-plaintiff with the patentee. See Abbott Lab. v. Diamedix Corp., 47 F.3d 1128

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Molon Motor and Coil Corp. v. Nidec Motor Corporation
946 F.3d 1354 (Federal Circuit, 2020)
Garcia-Gines v. United States
Federal Claims, 2017
Hood v. United States
127 Fed. Cl. 192 (Federal Claims, 2016)
Pricewaterhousecoopers Public Sector, LLP v. United States
126 Fed. Cl. 328 (Federal Claims, 2016)
Universal Protection Service, Lp v. United States
126 Fed. Cl. 173 (Federal Claims, 2016)
Ingham Regional Medical Center v. United States
126 Fed. Cl. 1 (Federal Claims, 2016)
Summit Multi-Family Housing Corporation v. United States
124 Fed. Cl. 562 (Federal Claims, 2015)
Ogunniyi v. United States
124 Fed. Cl. 525 (Federal Claims, 2015)
Little v. United States
124 Fed. Cl. 256 (Federal Claims, 2015)
Cordova v. United States
123 Fed. Cl. 685 (Federal Claims, 2015)
Milgroom v. United States
122 Fed. Cl. 779 (Federal Claims, 2015)
Woodruff v. United States
122 Fed. Cl. 761 (Federal Claims, 2015)
Jones v. United States
122 Fed. Cl. 490 (Federal Claims, 2015)
Ilaw v. United States
121 Fed. Cl. 408 (Federal Claims, 2015)
Stein v. United States
121 Fed. Cl. 248 (Federal Claims, 2015)
Visual Connections, LLC v. United States
120 Fed. Cl. 684 (Federal Claims, 2015)

Cite This Page — Counsel Stack

Bluebook (online)
134 F.3d 1481, Counsel Stack Legal Research, https://law.counselstack.com/opinion/textile-productions-inc-v-mead-corporation-and-fiber-trim-sewing-company-cafc-1998.