Saratoga Spa & Bath, Inc. v. Beeche Systems Corp.

230 A.D.2d 326, 656 N.Y.S.2d 787, 35 U.C.C. Rep. Serv. 2d (West) 478, 1997 N.Y. App. Div. LEXIS 4958
CourtAppellate Division of the Supreme Court of the State of New York
DecidedMay 8, 1997
StatusPublished
Cited by36 cases

This text of 230 A.D.2d 326 (Saratoga Spa & Bath, Inc. v. Beeche Systems Corp.) is published on Counsel Stack Legal Research, covering Appellate Division of the Supreme Court of the State of New York primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Saratoga Spa & Bath, Inc. v. Beeche Systems Corp., 230 A.D.2d 326, 656 N.Y.S.2d 787, 35 U.C.C. Rep. Serv. 2d (West) 478, 1997 N.Y. App. Div. LEXIS 4958 (N.Y. Ct. App. 1997).

Opinion

OPINION OF THE COURT

Casey, J.

Defendant Beeche Systems Corporation designs, produces and sells scaffolding and containment systems used for, inter [329]*329alia, the cleaning and painting of bridges. The Beeche system consists of a rigid, aluminum frame of interlocking eight-foot square units into which are placed pyramid-shaped bins or hoppers, which are designed to catch debris removed during the sand-blasting process. The sand-blasting debris falls through metal grating bolted to the top of the hopper and is then funnelled from the hopper into pipes for collection and eventual removal.

In 1990, Beeche contacted plaintiff to manufacture the hoppers to be used in its scaffolding system. Beeche provided plaintiff with the written specifications showing the dimensions for the hopper and Beeche fabricated a plywood plug or mockup from which plaintiff made a fiberglass mold. A sample of several hoppers was run and modifications in the dimensions were made at Beeche’s request.

Soon thereafter, hoppers were manufactured by plaintiff for Beeche and used without complaint on seven projects. In 1992, defendant George Campbell Painting Corporation (hereinafter Campbell) successfully bid on two large projects involving the maintenance, blasting and painting of the northbound and southbound spans of the Goldstar Bridge in Connecticut (hereinafter the Goldstar project). As this project required the use of a containment system, Campbell entered into a contract with Beeche. The Goldstar project was Beeche’s largest contract to date and certainly the most sophisticated. In addition, extremely stringent guidelines were imposed on Campbell regarding lead paint emissions. The Goldstar project had the most detailed full-lead containment specifications experienced by Beeche allowing for zero tolerance.

As part of Beeche’s contract with Campbell, Beeche ordered hoppers from plaintiff commencing in January 1993. Because of credit problems that Beeche was experiencing at the time, Campbell sent a letter to plaintiff guaranteeing payment. Plaintiff supplied hoppers to Beeche for the Goldstar project, with 55 of the initial order of 200 being returned as defective. Plaintiff gave Beeche a credit without question and, thereafter, over 100 additional hoppers were supplied to Beeche for the Goldstar project (including replacements for the 55), and accepted by defendants without return.

Beeche’s failure to pay for a significant amount of these hoppers, after repeated requests, resulted in this action for collection against Beeche based upon breach of contract and against Campbell pursuant to the written guarantee. Beeche answered, denying that any payment was due and owing, and counter[330]*330claimed for incidental and consequential damages arising out of plaintiffs breach of contract and breach of various implied warranties. Campbell answered, raising several affirmative defenses and a cross claim against Beeche alleging that problems with the Beeche system caused Campbell to encounter significant delays and monetary damages.

A jury trial was held at the conclusion of which Supreme Court dismissed, inter alia, Beeche’s counterclaims for breach of implied warranty of merchantability and breach of implied warranty of fitness for a particular purpose, as well as all of Campbell’s affirmative defenses and its cross claim. Finding that Beeche had accepted all of the hoppers supplied by plaintiff and that they conformed to the contract specifications, the jury returned a verdict in favor of plaintiff on its breach of contract cause of action in the amount of $41,396.10. A judgment was subsequently entered from which defendants now appeal.

Beeche initially claims error with Supreme Court’s dismissal, at the close of defendants’ case, of its counterclaims based on an implied warranty of merchantability (UCC 2-314) and implied warranty of fitness for a particular purpose (UCC 2-315). The implied warranty of merchantability is a guarantee by the seller that its goods are fit for the intended purpose for which they are used and that they will pass in the trade without objection (UCC 2-314). This warranty applies only where the seller is a merchant (UCC 2-314). Given the sales to Beeche with respect to the other seven projects, as well as the several involved orders for the Goldstar project, plaintiff is a merchant within the meaning of the statute and not, as plaintiff contends, an isolated or casual seller of goods (see, UCC 2-314, comment 3; Colopy v Pitman Mfg. Co., 206 AD2d 864).

Even if plaintiff is a merchant, a claim under UCC 2-314 cannot arise unless the goods sold are not of merchantable quality. For goods to be of merchantable quality they need to be reasonably fit for their intended purpose; they need not, however, be perfect (see, United States Leasing Corp. v Comerald Assocs., 101 Misc 2d 773, 777).

The evidence reveals that after plaintiff produced the unfinished hoppers, Beeche would, as the specifications required, trim them to fit the frame fixture into which they were placed. It only rejected 55 hoppers for which proper credit was given and Beeche did not seek any other remedial measures. Beeche did not raise any objections as to any other [331]*331hoppers until this action was commenced (see, e.g., Sparks v Stick, 135 AD2d 989, 990). If there were problems, these would necessarily be observed by Beeche prior to and during the finishing process and shipment. We find that based on this record the condition of the unfinished hoppers was such as to pass without objection under the contract description, was fit for their ordinary purpose and within the run variation permitted (see, UCC 2-314 [2] [a], [c], [d]).

For an implied warranty of fitness for a particular purpose claim to arise, the buyer must establish that the seller had reason to know, at the time of contracting, the buyer’s particular purpose for which the goods are required and that the buyer was justifiably relying upon the seller’s skill and judgment to select and furnish suitable goods, and that the buyer did in fact rely on that skill (UCC 2-315; see, United States Leasing Corp. v Comerald Assocs., supra, at 777). "The existence of this warranty, therefore, depends in part upon the comparative knowledge and skill of the parties” (Blockhead, Inc. v Plastic Forming Co., 402 F Supp 1017, 1024).

At the time of the subject orders Beeche was familiar with and had used the material for a couple of years without expressing dissatisfaction. Their usage was no longer theoretical and Beeche had extensive field experience with functioning systems. Moreover, while plaintiff was aware of the general nature of the hoppers’ use and function, it never had field experience with Beeche’s specialized use of the finished component parts. As such, no view of the evidence would have supported a conclusion that Beeche was relying on plaintiffs skill and knowledge at the time it ordered the hoppers for the Gold-star project (see, supra, at 1024). Consequently, both counterclaims were properly dismissed by Supreme Court.

Beeche also claims that Supreme Court erroneously excluded certain evidence. The particular hoppers kept inside at Beeche’s plant and the photographs and measurements of those at plaintiffs facility were either stacked for several years without spacers to prevent the lip from bending or depicted hoppers that had been sitting outside at plaintiffs facility, neglected and subject to weathering and deterioration since September 1993.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Stone Cast, Inc. v. Couch, Dale Marshall P.C.
2025 NY Slip Op 05860 (Appellate Division of the Supreme Court of New York, 2025)
Kane v. Covidien LP
E.D. New York, 2025
Magni-Flood, Inc. v. Vision Light Worx, Inc.
2024 NY Slip Op 51556(U) (Appellate Terms of the Supreme Court of New York, 2024)
Murray v. Samsung Elecs. Am., Inc.
2024 NY Slip Op 51257(U) (New York Supreme Court, Monroe County, 2024)
Velez v. Lasko Products, LLC
S.D. New York, 2023
Bayne v. Target Corporation
S.D. New York, 2022
MacSwan v. Merck & Co., Inc.
W.D. New York, 2022
Green v. Covidien LP
S.D. New York, 2019
Aronov v. Kanarek
2018 NY Slip Op 7405 (Appellate Division of the Supreme Court of New York, 2018)
Tears v. Bos. Scientific Corp.
344 F. Supp. 3d 500 (S.D. Illinois, 2018)
Mouzon v. Radiancy, Inc.
85 F. Supp. 3d 361 (District of Columbia, 2015)

Cite This Page — Counsel Stack

Bluebook (online)
230 A.D.2d 326, 656 N.Y.S.2d 787, 35 U.C.C. Rep. Serv. 2d (West) 478, 1997 N.Y. App. Div. LEXIS 4958, Counsel Stack Legal Research, https://law.counselstack.com/opinion/saratoga-spa-bath-inc-v-beeche-systems-corp-nyappdiv-1997.