Packgen v. Berry Plastics Corp.

973 F. Supp. 2d 48, 81 U.C.C. Rep. Serv. 2d (West) 803, 2013 WL 5348071, 2013 U.S. Dist. LEXIS 135568
CourtDistrict Court, D. Maine
DecidedSeptember 23, 2013
DocketNo. 2:12-cv-00080-JAW
StatusPublished
Cited by1 cases

This text of 973 F. Supp. 2d 48 (Packgen v. Berry Plastics Corp.) is published on Counsel Stack Legal Research, covering District Court, D. Maine primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Packgen v. Berry Plastics Corp., 973 F. Supp. 2d 48, 81 U.C.C. Rep. Serv. 2d (West) 803, 2013 WL 5348071, 2013 U.S. Dist. LEXIS 135568 (D. Me. 2013).

Opinion

ORDER ON MOTION FOR SUMMARY JUDGMENT

JOHN A. WOODCOCK, JR., Chief Judge.

In this breach of contract case, Berry Plastics Corporation and Covalence Specialty Coatings, LLC move for summary judgment, asserting that Packgen’s claims are barred by the parties’ contractual statute of limitations period. Packgen argues that the provision in both of Berry’s invoices stating that a one-year statute of limitations applied to the contracts at issue does not render its claims untimely because the invoices never became part of the parties’ contract. Packgen also argues that if the invoices are determined to be a confirmation of acceptance, the one-year limitation provisions are not part of the contracts because they are material alterations to the original agreement. The Court denies Berry’s motion for summary judgment because under section 2-207(2)(b) of title 11 of the Maine Revised Statutes, there is a genuine dispute of material fact as to whether the one-year statute of limitations terms materially altered the parties’ contracts.

I. BACKGROUND

A. Procedural History

Packgen filed a five-count complaint against Berry Corporation and Covalence Specialty Coatings, LLC (Berry) with the Court on March 7, 2012 alleging breach of contract, breach of express warranty, breach of implied warranty of fitness for a particular purpose, breach of implied warranty of merchantability, and negligence.1 Compl. (ECF No. 2-2). On November 30, 2012, Berry filed a motion for summary judgment on all counts. Defs.’ Mot. for Summ. J. (ECF No. 33) (Defs.’ Mot.). Packgen filed a memorandum opposing Berry’s motion on December 21, 2012. Pl. Packgen’s Opp’n to Defs.’ Mot. for Summ. J. (ECF No. 36) (Pl.’s Opp’n). Berry responded to Packgen’s opposition on January 4, 2013. Defs.’ Reply to Pl.’s Opp’n to Mot. for Summ. J. (ECF No. 41) (Defs.’ Reply).

The parties submitted a joint stipulated statement of facts on November 30, 2012. Stipulated Joint Summ. J.R. (ECF No. 35) (JSMF). The same day, Berry filed its statement of material facts in support of its motion. Statement of Material Facts in Supp. of Defs. ’ Berry Corporation and Covalence Specialty Coatings’ Mot. for Summ. J. (ECF No. 34) (DSMF). Packgen responded to Berry’s statement of material facts and submitted a statement of additional material facts on December 21, [51]*512012. PI ’s Responses to Defs. ’ Statement of Material Facts & Pl.’s Statement of Maternal Facts (ECF No. 37) (PSMF & PSAMF). On January 4, 2013, Berry filed a reply to Packgen’s statement of additional material facts. Defs. ’ Reply Statement to Pl.’s Opp’n and Statement of Additional Material Facts (ECF No. 42) (DRPSAMF). At Packgen’s request, the Court held oral argument on August 1, 2013. Pi’s Mot. Requesting Oral Argument (ECF No. 43); Order Granting Mot. for Oral Argument (ECF No. 44); Minute Entry (ECF No. 48).

B. Statement of Facts2

Packgen manufactures intermediate bulk containers (IBCs), which are used by petroleum refineries for the transportation and storage of fresh and spent catalyst. DSMF ¶ 1; PRDSMF ¶ 1. Berry supplied Packgen with woven polypropylene fabric that was chemically bonded to a layer of aluminum foil. DSMF ¶2; PRDSMF ¶2. On September 25, 2007, Packgen sent Co-valence Coated Products a purchase order for 61-inch laminated polypropylene foil. DSMF ¶ 3; PRDSMF ¶ 3. On November 26, 2007, Packgen sent a purchase order to Berry requesting 48-inch laminated polypropylene. DSMF ¶ 9; PRDSMF ¶ 9.

In the second half of November 2007, Ron Silen, strategic accounts manager for Berry, told Donald Roberts, purchasing agent for Packgen, that everything was all set with the purchase order for the 61-inch laminated polypropylene and that Berry had ordered the raw materials (woven polypropylene) that it was purchasing from a sister company in Mexico. PSAMF ¶ 1; DRPSAMF ¶ 1. On November 28, 2007, Mr. Silen sent Mr. Roberts an e-mail concerning the purchase orders for the 61-inch laminated polypropylene and the 48-inch laminated polypropylene.3 PSAMF ¶ 2; DRPSAMF ¶ 2. The e-mail stated:

Here is the update on the two PO’s:

1. For the 61" order: The woven material from Mexico will be shipping on 12/7 and we expect an arrival to Homer, no later than 12/14. Based on this schedule, we will run this order on the extruder on Sat, 12/15 and will [sic] ready to ship on 17th or 18th. I will follow-up with you to confirm any expedited shipment you might want us to proceed with. As a side note, our Purchasing group will continue to try and get an earlier delivery to see if [sic] can gain any extra days.
2. The 48" order that you placed yesterday: this PO has still not been entered into our new system (JD [52]*52Edwards) and entry of any new orders will not occur until Friday and into the weekend. I have communicated that you need a commitment date ASAP especially that you asked for first of the year delivery of this order (in accordance with the lead-time I had stated). All I can do at this point is to continue to press production scheduling of the situation and then get you a date when we are up under our new system which I hope will be early next week. I have discussed the situation with my management and plant management early this evening. I will continue to work with Jade, through customer service, to get you a date and hope that we can honor the 4-5 lead time that I communicated to you.

PSAMF ¶ 2; DRPSAMF ¶2. On December 13, 2007, Mr. Silen sent Mr. Roberts an e-mail concerning the purchase orders for the 61" laminated polypropylene and the 48" laminated polypropylene. PSAMF ¶ 3; DRPSAMF ¶ 3. The e-mail states:

Here is the update on your orders:

• 61": The woven material is in the US, has cleared customs, and will be delivered into our Homer plant by noon tomorrow. The plant is [sic] will run as received and will run into the weekend if need be. I will seek approval to get the order expedited, likely team drivers, assuming the order will be ready to ship by Monday/Tuesday.
• 48": Right now, the shipment (from Mexico) of the woven is still at 1/4/08 which means about a week to get to Homer. I’m still pushing to see if we can get it before the end of Dec. I will keep you updated.4

PSAMF IT 3; DRPSAMF ¶3. Berry shipped the 61-inch material on December 22, 2007. DSMF ¶ 4; PRDSMF ¶4. The term “vendor’s dock” in Packgen’s purchase orders for the 61-inch laminated polypropylene and the 48-inch laminated polypropylene specifies that the goods were to be delivered by Berry to a common carrier at the loading dock at Berry’s plant in Homer, Louisiana for shipment to Packgen’s plant in Auburn, Maine.5 PSAMF ¶ 5; DRPSAMF ¶ 5.

1. Shipment of the 61-inch Polypropylene

The shipment of 61-inch laminated polypropylene was received by Packgen on [53]*53December 27, 2007. PSAMF ¶ 6; DRPSAMF ¶ 6. On December 28, 2007, Berry sent Packgen an invoice for the 61-inch material by regular, first class U.S. Postal Service mail.6 DSMF ¶ 5; PRDSMF ¶ 5. Berry attached its standard terms and conditions to its December 28, 2007 invoice. DSMF ¶ 6; PRDSMF ¶ 6.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Packgen v. Berry Plastics Corp.
113 F. Supp. 3d 371 (D. Maine, 2015)

Cite This Page — Counsel Stack

Bluebook (online)
973 F. Supp. 2d 48, 81 U.C.C. Rep. Serv. 2d (West) 803, 2013 WL 5348071, 2013 U.S. Dist. LEXIS 135568, Counsel Stack Legal Research, https://law.counselstack.com/opinion/packgen-v-berry-plastics-corp-med-2013.