Packgen v. Berry Plastics Corp.

113 F. Supp. 3d 371, 2015 U.S. Dist. LEXIS 80928, 2015 WL 3868965
CourtDistrict Court, D. Maine
DecidedJune 23, 2015
DocketNo. 2:12-cv-00080-JAW
StatusPublished
Cited by1 cases

This text of 113 F. Supp. 3d 371 (Packgen v. Berry Plastics Corp.) is published on Counsel Stack Legal Research, covering District Court, D. Maine primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Packgen v. Berry Plastics Corp., 113 F. Supp. 3d 371, 2015 U.S. Dist. LEXIS 80928, 2015 WL 3868965 (D. Me. 2015).

Opinion

ORDER ON MOTION FOR SUMMARY JUDGMENT

JOHN A. WOODCOCK, JR., District Judge.

In this breach of contract case, Berry Plastics Corporation and Covalence Specialty Coatings, LLC (Berry) ■ move for summary judgment, asserting that Pack-gen has failed to prove causation and that Packgen’s claimed lost profit damages are not foreseeable as a matter of law. The Court denies Berry’s motion for' summary judgment because, viewed in the light most favorable to Packgen, there is sufficient evidence that the defective material caused the container failures and that the lost profits were foreseeable at the time of contracting to survive Berry’s dispositive motion.

I. BACKGROUND

A. Procedural History

On March 7, 2012, Packgen filed with this Court a five-count complaint against Berry alleging breach of contract, breach of express warranty, breach of implied warranty of fitness for a particular purpose, breach of implied warranty of merchantability, and negligence.1 Compl. (ECF No. 2-2). On December 15, 2014, Berry filed a notice of intent to file a motion for summary judgment. Notice to Ct. Regarding Summ. J. Briefing Schedule (ECF No. 77). On January 16, 2015, Berry moved for summary judgment and filed a supporting statement of material fact. Defs.’ Mot. for Summ. J. (ECF No. 78) (Defs.’ Mot.); Statement of Material Facts in Support of Def. Berry Plastics Corporation and Covalence Specialty Coatings’ Mot. for Summ. J. (ECF No. 79) (DSMF). On March 6, 2015, Packgen responded to Berry’s motion, filed a statement opposing Berry’s statement of material facts, and provided its own statement of material facts. Pl. Packgen’s Mem. in Opp’n to Defs.’ Second Mot. for Summ. J. (ECF No. 82) (Pl.’s Opp’n); Pl.’s Responses to Defs.’ Statement of Material Facts & Pl.’s Statement of Additional Material Facts (ECF No. 83) (PRDSMF). On March 20, 2015, Berry replied to Packgen’s opposition and to its statement of additional material facts. Defs.’ Reply to Pl.’s Opp’n to Mot. for Summ. J. (ECF No. 87) (Defs.’ Reply); Defs.’ Reply to Pl.’s Statement of Additional Facts (ECF No. 86) (DRPSAMF). On March 31, 2015, Packgen filed a response pursuant to Local Rule 56(e) to Berry’s requests to strike certain of Packgen’s statements of additional material facts. Pl.’s Responses to Defs.’ Requests to Strike (ECF No. 88) (Pl.’s Resp.).

[374]*374B. Statement of Summary Judgment Facts2

Packgen was incorporated in 2001 and has manufactured and sold catalyst containers since then. PSAMF ¶ 50; DRPSAMF ¶ 50. Packgen manufactures intermediate bulk containers (IBCs), which are used by petroleum refineries for the transportation and storage of fresh and spent catalyst. DSMF ¶ 1; PRDSMF ¶ 1. Berry supplied Packgen with woven polypropylene fabric that was chemically bonded to a layer of aluminum foil. DSMF ¶ 2; PRDSMF ¶ 2.

In-2006 and 2007, Packgen redesigned its catalyst containers to be manufactured out of foil-laminated material because bonding foil to the polypropylene substantially increased the strength and the structural integrity of the container. PSAMF ¶ 18; DRPSAMF ¶ 18. As required by regulatory authorities, the redesigned foil-laminated “Cougars” were tested by an independent agency using six times the weight of the catalyst to be placed in the Cougars.3 ’ PSAMF ¶ 30; DRPSAMF ¶30. The testing included vibration, bottom lift, top lift, stacking, and dropping tests; the Cougars, made from foil-laminated material provided by Berry in 2007, passed all of these tests and were certified for use as catalyst containers.4 PSAMF ¶ 31; DRPSAMF ¶31. John Lapoint, Pack-gen’s president, said that one of Berry’s sales representatives was “instrumental” in developing the foil-laminated material used to fabricate Cougars.5 PSAMF ¶ 41; DRPSAMF ¶'41.

1. Berry’s Knowledge of the Cougar Design and Purpose

Berry’s sales representatives visited Packgen’s manufacturing plant in Auburn, Maine in June 2007. During this visit, they watched Cougars being made, examined Cougar containers, and spoke with Packgen’s engineers and manufacturing staff about many issues, including Pack-gen’s requirements for the foil-laminated material, how the Cougars functioned, and how Packgen's customers would use these containers. PSAMF ¶ 42; DRPSAMF ¶ 42.

[375]*375Before July 2007, Packgen’s president was very open in-meetings and conversations with Berry’s sales representatives about Packgen’s catalyst containers and customers because he wanted the Berry sales representatives-to have as much information as possible so that Berry would be better able to supply foil-laminated material that met Packgen’s requirements for catalyst .containers, PSAMF ¶32; DRPSAMF ¶ 32. Packgen’s president informed Berry’s sales representatives of the following:. ... ,-

(1) Berry’s foil-laminated material would be the primary component of Cougar catalyst containers manufactured by Packgen, and companies in the catalyst and petroleum industries would use the containers to store and transport catalyst.
(2) The catalyst and petroleum industries are extremely safety conscious.
(3) Catalyst is a hazardous material and is self-heating if exposed to air; therefore, it is critical that catalyst be stored and transported in safe, secure, and reliable containers.
(4) Berry needed to supply foil-laminated material with strong and reliable ' bonds between all of the layers in order- for the containers to have the strength and. structural integrity needed to safely and securely store and transport catalyst.
(5) Packgen had a long-term customer that was.a major seller of fresh catalyst; Packgen and the customer jointly developed a custom foil-laminated Cougar to meet the customer’s needs; the customer planned, to purchase approximately 15,000 custom Cougars a year beginning in the second -half of 2007, and would increase its purchases in future years.6
(6) Packgen had invested substantial labor and working capital to develop the custom- Cougars, including purchasing and fabricating specialized manufacturing equipment and inventory' itéms needed to produce the-Cougars.7
(7) Packgen was marketing foil-laminated Cougars to refineries in North America and was already selling catalyst containers to Exxon Mobil; Packgen’s credibility with the refineries' would be enhanced because Packgen’s long-term customer would be delivering fresh catalyst to the refineries in the custom Cougars; in [376]*3762008, Packgen would close deals with many North American refineries for the sale of Cougars for their spent catalyst needs; and, the market for Cougars was potentially very large because there were more than 125 refineries in North America.8

(8) Packgeris purchases of foil-laminated material from Berry would increase in the future.

PSAMF ¶¶ 33-40; DRPSAMF ¶¶ 33-40.

2. Packgen’s Purchases of Material from Berry Between September 2007 and January 2008

On September 25, 2007, Packgen sent Berry a purchase order for 61-inch laminated polypropylene foil.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
113 F. Supp. 3d 371, 2015 U.S. Dist. LEXIS 80928, 2015 WL 3868965, Counsel Stack Legal Research, https://law.counselstack.com/opinion/packgen-v-berry-plastics-corp-med-2015.