Moore v. Boating Industry Associations

754 F.2d 698, 40 Fed. R. Serv. 2d 1263
CourtCourt of Appeals for the Seventh Circuit
DecidedJanuary 30, 1985
DocketNos. 83-2148, 83-2201
StatusPublished
Cited by8 cases

This text of 754 F.2d 698 (Moore v. Boating Industry Associations) is published on Counsel Stack Legal Research, covering Court of Appeals for the Seventh Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Moore v. Boating Industry Associations, 754 F.2d 698, 40 Fed. R. Serv. 2d 1263 (7th Cir. 1985).

Opinion

COFFEY, Circuit Judge.

This is an appeal from a jury verdict in favor of the plaintiffs, Dennis and George Moore, against two affiliated Marine industry trade associations and one of their employees, Donald I. Reed. The jury found that the defendants violated section 1 of the Sherman Act, 15 U.S.C. § l,1 disparaged the plaintiffs’ product and violated [701]*701the Illinois Consumer Fraud and Deceptive Business Practices Act, Ill.Rev.Stat. ch. 121V2, § 261 et seq. It returned a verdict on all the claims in the amount of $200,000. On post-verdict motions, the trial court denied the defendants’ motions for judgment n.o.v. or a new trial on the issue of the Sherman Act violation, but ordered a remittitur of damages from $200,000 to $167,-201. The district court, however, overturned the jury verdict finding that the defendants had committed the common law tort of product disparagement and had violated the Illinois Consumer Fraud and Deceptive Business Practices Act. Judgment was entered in the amount of $501,603 after trebling the $167,201 in damages. The defendants, Boating Industry Associations (“BIA”), Trailer Manufacturers Associations (“TMA”), and Donald I. Reed (“Reed”), appeal the jury verdict contending: (1) that there was insufficient evidence to establish any § 1 Sherman Act violation; (2) that the jury was erroneously instructed as to the law establishing such liability; and (3) that they were “ambushed” by the plaintiffs in their presentation of their damage evidence, or in the alternative, that the evidence presented was legally insufficient. The plaintiffs cross-appeal claiming that the district court erred in granting judgment n.o.v. on its common law product disparagement and Illinois statutory claims. We affirm.

I.

Before describing the evidence presented in this case, it would be helpful to detail the federal and state regulations which govern the manufacture of boat trailer lights. The Federal Motor Vehicle Safety Standards, 49 C.F.R. Part 571, promulgated by the National Highway Traffic Safety Administration (“NHTSA”) of the Department of Transportation (“DOT”), pursuant to the National Traffic and Motor Vehicle Safety Act, 15 U.S.C. § 1391, provide for the regulation of boat trailer lights. One of those standards, Standard 108, regulates the production requirements of tail lights and their associated equipment by requiring not only that boat trailers be equipped with a tail lamp, stop lamp, rear and side reflectors, side-mark lamps, turn signal lamps, and clearance lamps, but also that those lights conform to the photometric or brightness levels promulgated by the Society of Automotive Engineers. See 49 C.F.R. § 571.108 S4.1.1.

The DOT does not require the submission of-a laboratory test report proving that the light complies with Standard 108, but instead permits self-certification by the manufacturer of the light who may indicate compliance by placing a “DOT” symbol on their lamps. Compliance with DOT’s Standard 108 is accomplished either through self-initiated testing by the NHTSA or through a petition to commence a proceeding filed with the NHTSA by “any interested person” (including a manufacturer) who believes that the lighting equipment does not comply with the regulatory standards. 15 U.S.C. § 1412; 49 C.F.R. § 552. If such a petition is filed, NHTSA, within 120 days from the time of filing, must either grant the petition and commence a proceeding by investigation, or deny the petition and publish the reasons for its denial. 15 U.S.C. § 1410a(d). If in a proceeding commenced by NHTSA it is determined that the tail lights marked with the DOT symbols do not conform to Standard 108, the vehicle or trailer manufacturer using the lights will not be subject to civil penalty or recall if such manufacturer can establish that it did not have reason to know in the exercise of due care that the equipment did not conform with federal safety standards. 15 U.S.C. section 1397(b)(2).

Most states generally follow the federal regulatory scheme. However, the states of Virginia and California require affirmative certification by their state officials prior to sale of the lights in their states. The required photometric or brightness levels for tail lights in those states are substantially identical to the federal statutory requirements contained in Standard 108.

One of the plaintiffs, Dennis Moore, testified that he and his father, George Moore, entered the boat trailer light manufactur[702]*702ing business in the early 1970’s, their plant being located in Livermore, California. In 1974, they introduced their new “Dry Launch Light Model 701” (“Model 701”).2 This light was certified as being salesworthy by the states of California and Virginia, and by the American Association of Motor Vehicle Administrators. Subsequently, in 1975, the California Highway Patrol (“CHP”) purchased a sample pair of the Model 701 light, tested the sample and found that its sidelights were not in compliance with the photometric requirements of Standard 108. Dennis Moore testified that after he was notified that the lamp had failed the test he traveled to CHP headquarters where he explained to the person in charge of the compliance program, a Mr. Sheppard, that because of the unique design of the Model 701, the California authorities had improperly tested these lights.3 However, subsequent to this encounter he in fact did make certain other changes in the design of the light and submitted a test report to the CHP from a CHP-approved private laboratory stating that the Model 701 complied with the required photometric output. Thereafter, in September of 1976, the CHP conducted further tests and determined that the lights again failed to meet the Standard 108 photometric output requirements. At trial, Dennis Moore explained this discrepancy by stating that the CHP had not tested the improved version of the Model 701, but had in fact tested an earlier model.

At this time, the BIA and TMA (hereinafter “Association”) were holding their yearly meeting, which is scheduled to coincide with the annual industry trade show. The industry show is held to enable the manufacturers, distributors, and dealers to make purchases for the forthcoming boating season. Prior to the 1976 trade show, Donald Reed, Director of Engineering for the BIA and the TMA and administrator of their certification program, received a test report critical of the Model 701 from Wesbar Corporation, a member of the Association which also happened to be the manufacturer of a tail light in direct competition with the Model 701. Wesbar told the Association that a copy of this report had been sent to the DOT and the CHP. Reed called those two agencies and was advised that both the DOT and CHP would purchase the Model 701 on the market and conduct their own separate tests.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
754 F.2d 698, 40 Fed. R. Serv. 2d 1263, Counsel Stack Legal Research, https://law.counselstack.com/opinion/moore-v-boating-industry-associations-ca7-1985.