I-CA Enterprises, Inc. v. Palram Americas, Inc.

235 Cal. App. 4th 257, 185 Cal. Rptr. 3d 24, 2015 Cal. App. LEXIS 243
CourtCalifornia Court of Appeal
DecidedFebruary 18, 2015
DocketB243362
StatusUnpublished
Cited by16 cases

This text of 235 Cal. App. 4th 257 (I-CA Enterprises, Inc. v. Palram Americas, Inc.) is published on Counsel Stack Legal Research, covering California Court of Appeal primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
I-CA Enterprises, Inc. v. Palram Americas, Inc., 235 Cal. App. 4th 257, 185 Cal. Rptr. 3d 24, 2015 Cal. App. LEXIS 243 (Cal. Ct. App. 2015).

Opinion

Opinion

CHAVEZ, J.

I-CA Enterprises, Inc. (I-CA), appeals from a final judgment following a jury trial on I-CA’s claims of tortious interference with contractual relations against defendants Palram Americas, Inc. (Palram), and Plasgad Plastic Products Agricultural Cooperative Ltd. of Kibbutz Gadot (Plasgad). I-CA argues that it was entitled to a finding of joint and several liability against both defendants, rather than a separate award against each defendant. I-CA further argues that the trial court erred in granting a judgment notwithstanding the verdict (JNOV) on the issue of punitive damages as to Palram and a nonsuit on the issue of punitive damages as to Plasgad. Finally, I-CA argues that the prevailing party determination as between I-CA and Plasgad must be reversed and remanded for redetermination.

Palram cross-appeals from the judgment, arguing that no substantial evidence supports the jury verdict against it for compensatory damages on the theory of tortious interference with contractual relations. Finding no error we affirm the judgment.

FACTUAL BACKGROUND

The business relationships between the parties

I-CA is a small business incorporated in California in 1993 by husband and wife Adina Aloni and Doron Aloni (Aloni). I-CA stands for Israel-California. I-CA was established for the purpose of importing products from Israel to California.

*262 Palram is a company based in Israel that manufactures and sells corrugated panels in the United States. 1 Palram uses the extrusion method to produce the corrugated panels. The panels were attached to structures with wood closure strips — also manufactured by Palram — that matched the corrugation of the Palram panels. In 1993, Palram started trying to sell its products in Home Depot and some other retailers in the do-it-yourself (DIY) market. I-CA opened the first warehouse for Palram in the United States, and started importing the products from Israel.

Sometime in 1997 or 1998, Palram lost to a local wood supplier the business of selling the wood closure strips to Home Depot. Aloni suggested to his contacts at Palram that a plastic closure strip would be less prone to break and could not be undercut by the local wood supplier. The Palram executives informed Aloni that they could not manufacture such a product because Palram is an extrusion manufacturer, not an injection mold manufacturer. However, Palram had no objection to Aloni exploring this idea. The Palram executives expressed interest in hearing from Aloni later on, after he had the chance to develop the product.

Plasgad is an Israel-based injection molding plastics manufacturer. In 1999, Aloni attended a trade show for the DIY market in Chicago. There, he met Amnon Shalman (Shalman), a representative of Plasgad. After the trade show, I-CA established a business relationship with Plasgad whereby I-CA agreed to distribute, warehouse, and market Plasgad products on the West Coast. At that time, the only product Plasgad sold in the DIY industry was a plastic tub for mixing concrete. Plasgad had no business relationship with Palram.

Aloni invited two Plasgad executives to visit his warehouse in Van Nuys, where he showed them the wood closure strips he was storing for Palram. Aloni told the Plasgad executives about his idea of a plastic closure strip. After the executives’ return to Israel, Plasgad informed Aloni that it would like to be the manufacturer for this plastic closure strip, which together they would develop and take a chance on. Plasgad and I-CA worked together for many years to develop the closure strip specifically for Palram products. Plasgad insisted that it must own the patent for the new plastic closure strips. Aloni was agreeable to this, as long as he could be the exclusive North America supplier for the product. Plasgad obtained a patent for the strips on November 26, 2002.

*263 In early 2001, former I-CA marketing manager Norm Cohen had an idea to develop a private label mixing tub for Ace Hardware. Aloni brought the idea to Plasgad, and Plasgad’s executives agreed to develop and sell the private label mixing tubs.

On February 20, 2002, a representative of Palram provided a written confirmation letter stating that I-CA would be Palram’s sole supplier of the plastic closure strips, and that Palram would be the exclusive distributor of these products in North America and Latin America. The letter agreement was signed by both Palram and Aloni for I-CA.

In an e-mail dated February 22, 2002, Plasgad indicated it was acceptable to Plasgad that all purchases of the plastic closure strips in the United States be through I-CA. Palram was aware that I-CA was the exclusive distributor of the strips in North America.

Home Depot decided to sell the plastic strips in its stores. Beginning in 2005, the wood closure strips being sold in all of the Home Depot stores in North American were replaced with the plastic strips. During this time, Palram bought 100 percent of the strips that Plasgad was able to manufacture.

On May 8, 2005, Shalman of Plasgad notified Norm Cohen of I-CA that Palram had contacted Plasgad directly.' Shalman did not like this, because Palram was putting him in a position where he had to reply. Shalman asked I-CA to “please take care of this issue.” Shalman responded to his contact at Palram: “I-CA is our customer and all contacts regarding the closure strips will have to go through them. I am sure you understand that.” Aloni also had a conversation with the same contact at Palram and reiterated that if Palram has any issues they must communicate with I-CA. Plasgad was not permitted to “go around” I-CA.

The written contract between Plasgad and I-CA

On April 25, 2005, I-CA sent an e-mail to Plasgad suggesting they put in writing all of their verbal agreements relating to the plastic closure strips and the Ace Hardware tubs. This suggestion was due in part to an impending change of leadership at Plasgad. Plasgad agreed and indicated it would start working on a draft.

Plasgad’s attorneys prepared an agreement captioned “Marketing and Exclusivity Agreement.” The first draft included a provision that allowed Plasgad to work directly with Palram for marketing products outside of the United States. Aloni objected to this provision, and requested that a provision be added prohibiting anyone but I-CA from directly or indirectly distributing *264 the plastic closure strips in North America. Plasgad agreed to this modification and incorporated the change into the final version of the agreement, which both Plasgad and I-CA signed. The final agreement clarified that any merchandise sent to North America had to pass through I-CA. It also provided that the parties would establish sales goals, and compliance with those goals would ensure continued exclusivity for I-CA. The agreement could be terminated by either party upon notice in writing, six months in advance.

Palram’s and Plasgad’s business relationships with I-CA end

In December of 2005, Plasgad increased its prices and asked I-CA to get this change approved by Palram. I-CA engaged in “tough” negotiations with Palram.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Law Office of Gilbert & Nguyen v. Medill CA2/7
California Court of Appeal, 2026
The Skinner Law Group v. Tacomania CA6
California Court of Appeal, 2025
Truglio v. Chutter CA2/3
California Court of Appeal, 2025
Jones v. David CA2/4
California Court of Appeal, 2021
Villa v. City of Long Beach CA2/7
California Court of Appeal, 2021
Mark One Corporation
E.D. California, 2020
Jenni Rivera Enters., LLC v. Latin World Entm't Holdings, Inc.
249 Cal. Rptr. 3d 122 (California Court of Appeals, 5th District, 2019)
Darrise Jeffers v. United States
208 A.3d 357 (District of Columbia Court of Appeals, 2019)
In re Arizona Theranos, Inc., Litigation
256 F. Supp. 3d 1009 (D. Arizona, 2017)
Secci v. United Independent Taxi Drivers, Inc.
8 Cal. App. 5th 846 (California Court of Appeal, 2017)
People v. Stamps
3 Cal. App. 5th 988 (California Court of Appeal, 2016)
Soto v. BorgWarner Morse TEC
California Court of Appeal, 2015
Soto v. Borgwarner Morse Tec Inc. CA2/4
239 Cal. App. 4th 165 (California Court of Appeal, 2015)

Cite This Page — Counsel Stack

Bluebook (online)
235 Cal. App. 4th 257, 185 Cal. Rptr. 3d 24, 2015 Cal. App. LEXIS 243, Counsel Stack Legal Research, https://law.counselstack.com/opinion/i-ca-enterprises-inc-v-palram-americas-inc-calctapp-2015.