Davis v. Husqvarna Motor

561 So. 2d 847, 1990 La. App. LEXIS 1173, 1990 WL 60933
CourtLouisiana Court of Appeal
DecidedMay 9, 1990
Docket21307-CA
StatusPublished
Cited by9 cases

This text of 561 So. 2d 847 (Davis v. Husqvarna Motor) is published on Counsel Stack Legal Research, covering Louisiana Court of Appeal primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Davis v. Husqvarna Motor, 561 So. 2d 847, 1990 La. App. LEXIS 1173, 1990 WL 60933 (La. Ct. App. 1990).

Opinion

561 So.2d 847 (1990)

Phillip DAVIS, Jr., Plaintiff-Appellee,
v.
HUSQVARNA MOTOR, et al., Defendants-Appellants.

No. 21307-CA.

Court of Appeal of Louisiana, Second Circuit.

May 9, 1990.
Rehearing Denied June 14, 1990.

*848 Davenport, Files & Kelly by Thos. W. Davenport, Jr., Monroe, for defendants-appellants.

Nelson, Hammons & White by John L. Hammons, Shreveport, C. Sherburne Sentell, Jr., Minden, for plaintiff-appellee.

Before HALL, MARVIN and SEXTON, JJ.

SEXTON, Judge.

This is an appeal by defendant-appellant, McKinney Saw and Cycle, Inc. (hereinafter referred to as "McKinney"), claiming numerous errors in the trial court's findings against it in favor of plaintiff-appellee, Phillip Davis, Jr. Plaintiff-appellee answers the appeal, also asserting error by the trial court. We amend and affirm as amended.

FACTS

During the year 1982, McKinney was the authorized and franchised dealer of products manufactured by Husqvarna Motor (hereinafter referred to as "Husqvarna"). These products, including power saws, were sold at retail by McKinney at its place of business in Ruston, Louisiana. Husqvarna is a Swedish corporation and has a factory representative in the United States. In 1982, Huskipower Outdoor Equipment Corporation (hereinafter referred to as "Huskipower"), with its home office in Charlotte, North Carolina, and a branch office in Shreveport, Louisiana, was the designated distributor for the products of Husqvarna in Arkansas, Mississippi, and Louisiana. The factory representative of Husqvarna dealt directly with the designated distributors who, in turn, dealt directly with the designated dealers in the geographical *849 territory assigned to each distributor. By this marketing scheme, McKinney was required to purchase new Husqvarna products and parts from Huskipower.

In October of 1982, McKinney purchased a Model 65 Husqvarna power saw from Huskipower for resale at retail. Huskipower had modified the vent valve on this model, and employees of McKinney who worked in its repair shop were aware of this modification. On November 16, 1982, McKinney sold a model 65 Husqvarna power saw to Mr. Robert Singleton, plaintiff's employer, without advising him of the alteration.

McKinney's records reflect that this saw was returned on two occasions for repair work, on December 4, 1984, and on December 14, 1984. On neither occasion did McKinney repair the vent valve or advise Mr. Singleton of its modification.

On March 5, 1985, plaintiff and his sons were cutting pulpwood for Mr. Singleton and were using his equipment in their efforts. On that morning, plaintiff and his sons fueled, oiled, and sharpened the chain of the Husqvarna chain saw before beginning their day's work. After the initial supply of fuel had been exhausted, one of plaintiff's sons refilled the saw with fuel and oil and left it in an upright position while plaintiff went to examine a large tree that had to be felled. After this examination, plaintiff returned to the saw and prepared to start it. He pulled the choke lever out, engaging the choke, and cranked the saw one time. On this crank, the saw popped, and he pushed the choke lever in. He then pulled the starter cord for the second time, at which point the saw and plaintiff's clothing burst into flames.

Plaintiff's sons extinguished the flames, and plaintiff was taken to the Bienville General Hospital emergency room. He was then transferred to the Burn Unit at LSU Medical Center in Shreveport, where he remained hospitalized until March 14, 1985. He was finally diagnosed with second and third degree burns over 18 percent of his total body surface, as most of his right side had been in flames. Plaintiff underwent extensive skin grafting procedures from March 25 through March 31, 1985, and was later readmitted to LSU Medical Center from January 10 through February 9, 1988, undergoing further treatment for complications which had developed with his skin grafting procedures. Plaintiff's total medical bills were $64,411.57. Additionally, plaintiff was rendered totally and permanently disabled from any employment whatsoever.

In suit filed on February 24, 1986, plaintiff named Husqvarna, Boswork Distributing Company (hereinafter referred to as "Boswork"), and McKinney as defendants. Boswork was joined on allegations that it was the distributor for Husqvarna and that the power saw in question had been acquired by McKinney from Boswork. Through later discovery, it was learned that Boswork did not become the distributor of Husqvarna until 1984 and that Huskipower was the distributor when McKinney acquired the power saw that it subsequently sold to Robert Singleton.

Prior to trial, plaintiff entered into a compromise of its claims against Husqvarna and Boswork, obtained an order of dismissal, and released these two parties. Plaintiff then proceeded to trial against McKinney. After trial, the jury returned its special verdict form, determining plaintiff's total damages to be $294,566.37 with fault apportioned as follows:

 Plaintiff     0 percent
 McKinney     20 percent
 Husqvarna    80 percent[1]

In accordance with the special verdict form, a judgment was rendered awarding plaintiff damages of $58,913.27 against McKinney, this being 20 percent of the total damages awarded.

Appellant McKinney has taken this suspensive appeal which was followed by an answer to the appeal by the plaintiff-appellee Davis—each party having assigned four errors. These assignments of error present the following six issues:

*850 (1) Extent of fault of McKinney and the plaintiff

(2) Extent of damages
(3) Extent of the judgment against McKinney
(4) Validity of plaintiff's motion in limine
(5) Assessment of expert fees
(6) Assessment of costs

FAULT OF McKINNEY AND THE PLAINTIFF

As is evidenced by the assignments of error, both parties contest the jury's findings of fault. The basis of McKinney's argument that the trial court erred in assessing any fault against it is that plaintiff did not prove that the modification of the vent valve on the saw which McKinney sold to Robert Singleton was the cause of the saw's explosion. The plaintiff contends that the jury was correct in finding that the saw was rendered unreasonably dangerous by Huskipower's modification to the vent value, based on the testimony of plaintiff's expert, Mr. Norman H. Sachnik.

The testimony at trial revealed that the chain saw manufactured by Husqvarna includes a fuel tank vent valve controlling the venting of the gas tank. The purpose of this valve is two-fold: First, it allows air to enter the gas tank from the outside to prevent the formation of a vacuum as the fuel is dispensed into the ignition system and carburetor. Second, it prevents the escape of gasoline from the tank through the valve. This valve is designed with a small stainless steel sphere approximately the size of a BB which moves upwards and downwards in a cylindrical slot inside the valve. When the sphere is down, it allows air to enter through the exterior opening at the top of the valve and pass into the fuel tank, thereby preventing the formation of a vacuum as gasoline exits the fuel tank into the ignition system. However, should the chain saw be turned over or should pressure from excessive fluids or vapors exist in the fuel tank, this sphere is forced upwards, where is seats, thereby preventing the inadvertent escape of flammable gasoline vapors or liquids.

According to Mr. Edward J.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Wampold v. Fisher
837 So. 2d 638 (Louisiana Court of Appeal, 2002)
Allen v. Roadway Exp., Inc.
728 So. 2d 1015 (Louisiana Court of Appeal, 1999)
Williams v. City of Monroe
658 So. 2d 820 (Louisiana Court of Appeal, 1995)
Brinson v. Morgan City Housing Authority
629 So. 2d 1214 (Louisiana Court of Appeal, 1993)
McKinney Saw & Cycle v. Barris
626 So. 2d 786 (Louisiana Court of Appeal, 1993)
Weaver v. Valley Elec. Membership Corp.
615 So. 2d 1375 (Louisiana Court of Appeal, 1993)
Gibson v. Bossier City General Hosp.
594 So. 2d 1332 (Louisiana Court of Appeal, 1991)
Newman v. Ellis
572 So. 2d 170 (Louisiana Court of Appeal, 1990)
Holliday v. United Services Auto. Ass'n
569 So. 2d 143 (Louisiana Court of Appeal, 1990)

Cite This Page — Counsel Stack

Bluebook (online)
561 So. 2d 847, 1990 La. App. LEXIS 1173, 1990 WL 60933, Counsel Stack Legal Research, https://law.counselstack.com/opinion/davis-v-husqvarna-motor-lactapp-1990.