Utah § 41-6a-1631 Prohibitions.

Utah Statutes

§ 41-6a-1631 — Prohibitions.

Utah § 41-6a-1631

Title 41Motor Vehicles

Ch. 41-6aTraffic Code

Part 41-6a-16Vehicle Equipment

This text of Utah § 41-6a-1631 (Prohibitions.) is published on Counsel Stack Legal Research, covering Utah primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Utah Code Ann. § 41-6a-1631 (2026).

Text

(1)A person may not operate on a highway a motor vehicle that is mechanically altered or changed:

(1)(a) in any way that may under normal operation:

(1)(a)(i) cause the motor vehicle body or chassis to come in contact with the roadway;

(1)(a)(ii) expose the fuel tank to damage from collision; or

(1)(a)(iii) cause the wheels to come in contact with the body;

(1)(b) in any manner that may impair the safe operation of the vehicle;

(1)(c) so that any part of the vehicle other than tires, rims, and mudguards are less than three inches above the ground;

(1)(d) to a frame height of more than 24 inches for a motor vehicle with a gross vehicle weight rating of less than 4,500 pounds;

(1)(e) to a frame height of more than 26 inches for a motor vehicle with a gross vehicle weight rating of at least

Free access — add to your briefcase to read the full text and ask questions with AI

(1) A person may not operate on a highway a motor vehicle that is mechanically altered or changed:

(1)(a) in any way that may under normal operation:
(1)(a)(i) cause the motor vehicle body or chassis to come in contact with the roadway;
(1)(a)(ii) expose the fuel tank to damage from collision; or
(1)(a)(iii) cause the wheels to come in contact with the body;
(1)(b) in any manner that may impair the safe operation of the vehicle;
(1)(c) so that any part of the vehicle other than tires, rims, and mudguards are less than three inches above the ground;
(1)(d) to a frame height of more than 24 inches for a motor vehicle with a gross vehicle weight rating of less than 4,500 pounds;
(1)(e) to a frame height of more than 26 inches for a motor vehicle with a gross vehicle weight rating of at least 4,500 pounds and less than 7,500 pounds;
(1)(f) to a frame height of more than 28 inches for a motor vehicle with a gross vehicle weight rating of at least 7,500 pounds;
(1)(g) by stacking or attaching vehicle frames (one from on top of or beneath another frame); or
(1)(h) so that the lowest portion of the body floor is raised more than three inches above the top of the frame.
(2) If the wheel track is increased beyond the O.E.M. specification, the top 50% of the tires shall be covered by the original fenders, by rubber, or other flexible fender extenders under any loading condition.
(3) A violation of this section is an infraction.