Utah § 41-6a-1613 Lamp required for operation of vehicle on highway or adjacent shoulder -- Dimming of lights.

Utah Statutes

§ 41-6a-1613 — Lamp required for operation of vehicle on highway or adjacent shoulder -- Dimming of lights.

Utah § 41-6a-1613

Title 41Motor Vehicles

Ch. 41-6aTraffic Code

Part 41-6a-16Vehicle Equipment

This text of Utah § 41-6a-1613 (Lamp required for operation of vehicle on highway or adjacent shoulder -- Dimming of lights.) is published on Counsel Stack Legal Research, covering Utah primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Utah Code Ann. § 41-6a-1613 (2026).

Text

(1)(1)(a) If a vehicle is operated on a highway or shoulder adjacent to the highway under the conditions specified under Subsection 41-6a-1603(1)(a), the operator of a vehicle shall use a high or low beam distribution of light or composite beam except as provided under Subsection (1)(c).

(1)(b) Except as provided under Subsection (1)(c), the distribution of light or composite beam shall be directed high enough and of sufficient intensity to reveal persons and vehicles at a safe distance in advance of the vehicle.

(1)(c) The operator of a vehicle shall use a low beam distribution of light or composite beam if the vehicle approaches:

(1)(c)(i) an oncoming vehicle within 500 feet; or

(1)(c)(ii) another vehicle from the rear within 300 feet.

(2)(2)(a) The low beam distribution of light or co

Free access — add to your briefcase to read the full text and ask questions with AI

(1) (1)(a) If a vehicle is operated on a highway or shoulder adjacent to the highway under the conditions specified under Subsection 41-6a-1603(1)(a), the operator of a vehicle shall use a high or low beam distribution of light or composite beam except as provided under Subsection (1)(c).
(1)(b) Except as provided under Subsection (1)(c), the distribution of light or composite beam shall be directed high enough and of sufficient intensity to reveal persons and vehicles at a safe distance in advance of the vehicle.
(1)(c) The operator of a vehicle shall use a low beam distribution of light or composite beam if the vehicle approaches:
(1)(c)(i) an oncoming vehicle within 500 feet; or
(1)(c)(ii) another vehicle from the rear within 300 feet.
(2) (2)(a) The low beam distribution of light or composite beam shall be aimed to avoid projecting glaring rays into the:
(2)(a)(i) eyes of an oncoming operator; or
(2)(a)(ii) rearview mirror of a vehicle approached from the rear.
(2)(b) A vehicle is not in violation of Subsection (2)(a) if:
(2)(b)(i) the vehicle has not been significantly altered from the original vehicle manufacturer's specifications; or
(2)(b)(ii) the glaring rays result from road contour or a temporary load on the vehicle.
(3) A violation of this section is an infraction.