Utah § 41-6a-1105 Operation of bicycle or moped on and use of roadway -- Duties, prohibitions.

Utah Statutes

§ 41-6a-1105 — Operation of bicycle or moped on and use of roadway -- Duties, prohibitions.

Utah § 41-6a-1105

Title 41Motor Vehicles

Ch. 41-6aTraffic Code

Part 41-6a-11Bicycles and Other Vehicles, Regulation of Operation

This text of Utah § 41-6a-1105 (Operation of bicycle or moped on and use of roadway -- Duties, prohibitions.) is published on Counsel Stack Legal Research, covering Utah primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Utah Code Ann. § 41-6a-1105 (2026).

Text

(1)A person operating a bicycle or a moped on a roadway at less than the normal speed of traffic at the time and place and under the conditions then existing shall ride as near as practicable to the right-hand edge of the roadway except when:

(1)(a) overtaking and passing another bicycle or vehicle proceeding in the same direction;

(1)(b) preparing to make a left turn at an intersection or into a private road or driveway;

(1)(c) traveling straight through an intersection that has a right-turn only lane that is in conflict with the straight through movement; or

(1)(d) reasonably necessary to avoid conditions that make it unsafe to continue along the right-hand edge of the roadway including:

(1)(d)(i) fixed or moving objects;

(1)(d)(ii) parked or moving vehicles;

(1)(d)(iii) bicycles;

(1)(

Free access — add to your briefcase to read the full text and ask questions with AI

(1) A person operating a bicycle or a moped on a roadway at less than the normal speed of traffic at the time and place and under the conditions then existing shall ride as near as practicable to the right-hand edge of the roadway except when:

(1)(a) overtaking and passing another bicycle or vehicle proceeding in the same direction;
(1)(b) preparing to make a left turn at an intersection or into a private road or driveway;
(1)(c) traveling straight through an intersection that has a right-turn only lane that is in conflict with the straight through movement; or
(1)(d) reasonably necessary to avoid conditions that make it unsafe to continue along the right-hand edge of the roadway including:
(1)(d)(i) fixed or moving objects;
(1)(d)(ii) parked or moving vehicles;
(1)(d)(iii) bicycles;
(1)(d)(iv) pedestrians;
(1)(d)(v) animals;
(1)(d)(vi) surface hazards; or
(1)(d)(vii) a lane that is too narrow for a bicycle and a vehicle to travel safely side by side within the lane.
(2) A person operating a bicycle or moped on a highway shall operate in the designated direction of traffic.
(3) (3)(a) A person riding a bicycle or moped on a roadway may not ride more than two abreast with another person except on paths or parts of roadways set aside for the exclusive use of bicycles.
(3)(b) If allowed under Subsection (3)(a), a person riding two abreast with another person may not impede the normal and reasonable movement of traffic and shall ride within a single lane.
(4) If a usable path for bicycles has been provided adjacent to a roadway, a bicycle rider may be directed by a traffic-control device to use the path and not the roadway.
(5) (5)(a) As used in this Subsection (5), "immediate hazard" means a vehicle approaching an intersection at a proximity and rate of speed sufficient to indicate to a reasonable person that there is a danger of collision or accident.
(5)(b) Except as provided in Subsection (6), an individual operating a bicycle approaching a stop sign may proceed through the intersection without stopping at the stop sign if:
(5)(b)(i) the individual slows to a reasonable speed; and
(5)(b)(ii) yields the right-of-way to:

(5)(b)(ii)(A) any pedestrian within the intersection or an adjacent crosswalk;
(5)(b)(ii)(B) other traffic within the intersection; and
(5)(b)(ii)(C) oncoming traffic that poses an immediate hazard during the time the individual is traveling through the intersection.
(6) Subsection (5)(b) does not apply to an intersection with an active railroad grade crossing as defined in Section 41-6a-1005.