(1)(1)(a) Upon registering a vehicle, the division shall issue to the owner a standard license plate described in Subsection (1)(b) unless the division issues to the owner:
(1)(a)(i) a special group license plate in accordance with Section 41-1a-418; or
(1)(a)(ii) an apportioned vehicle license plate in accordance with Section 41-1a-301.
(1)(b) The division may offer up to four standard license plate options at one time, each with a different design as follows:
(1)(b)(i) two designs that incorporate one or more elements that represent the state's economy or geography;
(1)(b)(ii) one design that represents the state's values or culture; and
(1)(b)(iii) one design that commemorates a current event relevant to the state or a significant anniversary of a historic event relevant to the state.
Free access — add to your briefcase to read the full text and ask questions with AI
(1) (1)(a) Upon registering a vehicle, the division shall issue to the owner a standard license plate described in Subsection (1)(b) unless the division issues to the owner:
(1)(a)(i) a special group license plate in accordance with Section 41-1a-418; or
(1)(a)(ii) an apportioned vehicle license plate in accordance with Section 41-1a-301.
(1)(b) The division may offer up to four standard license plate options at one time, each with a different design as follows:
(1)(b)(i) two designs that incorporate one or more elements that represent the state's economy or geography;
(1)(b)(ii) one design that represents the state's values or culture; and
(1)(b)(iii) one design that commemorates a current event relevant to the state or a significant anniversary of a historic event relevant to the state.
(1)(c) The division shall offer:
(1)(c)(i) each design described in Subsection (1)(b)(i) or (ii) for at least a 10-year period; and
(1)(c)(ii) each design described in Subsection (1)(b)(iii) for no more than a five-year period.
(1)(d) The division may not offer more than four standard license plate designs at any one time.
(2) Before the division may offer a design described in Subsection (1)(b), the division shall:
(2)(a) consult with the Utah Department of Cultural and Community Engagement regarding the proposed design;
(2)(b) identify which current standard license plate design will be replaced by the proposed design; and
(2)(c) submit the proposed design to the commission.
(3) (3)(a) If the commission receives a submission for a proposed design of a standard license plate as described in Subsection (2)(c), or a sponsored special group license plate as described in Section 41-1a-419 and Part 16, Sponsored Special Group License Plates, the commission shall notify:
(3)(a)(i) the governor;
(3)(a)(ii) the speaker of the House of Representatives; and
(3)(a)(iii) the president of the Senate.
(3)(b) After receiving a notification described in Subsection (3)(a):
(3)(b)(i) the governor shall appoint an individual to the license plate design review board described in Subsection (3)(c);
(3)(b)(ii) the speaker of the House of Representatives shall appoint a member of the House of Representatives to the license plate design review board described in Subsection (3)(c); and
(3)(b)(iii) the president of the Senate shall appoint a member of the Senate to the license plate design review board described in Subsection (3)(c).
(3)(c) (3)(c)(i) The license plate design review board, comprised of the members appointed as described in Subsection (3)(b), shall review proposed license plate designs.
(3)(c)(ii) The member of the license plate design review board appointed by the governor shall serve as chair and convene the license plate design review board.
(3)(c)(iii) The license plate design review board shall:
(3)(c)(iii)(A) review each proposed license plate design; and
(3)(c)(iii)(B) vote whether to approve or reject the proposed license plate design.
(3)(c)(iv) If all three members of the license plate design review board are not present, the license plate design review board may not consider or vote on a proposed license plate design.
(3)(c)(v) The license plate design review board shall notify the commission and the division regarding the results of the vote to approve each proposed license plate design.
(3)(d) The license plate design review board is not subject to Title 52, Chapter 4, Open and Public Meetings Act.
(3)(e) If the license plate design review board approves a proposed license plate design, the division may begin the processes necessary for production and distribution of the license plate.
(4) (4)(a) Except as provided in Subsection (4)(b), the division may not order or produce a standard license plate that is discontinued under this section.
(4)(b) The division may issue a discontinued standard license plate until the division exhausts the discontinued standard license plate's remaining stock.
(5) (5)(a) Each license plate shall have displayed on it:
(5)(a)(i) the registration number assigned to the vehicle for which the license plate is issued;
(5)(a)(ii) the name of the state; and
(5)(a)(iii) unless exempted by Section 41-1a-301 or 41-1a-407, a registration decal showing the date of expiration displayed in accordance with Subsection (8).
(5)(b) No later than July 1, 2025, each license plate:
(5)(b)(i) shall have an embossed edge around the perimeter of the plate; and
(5)(b)(ii) may not have embossed registration numbers or characters.
(6) If registration is extended by affixing a registration decal to the license plate, the expiration date of the registration decal governs the expiration date of the license plate.
(7) (7)(a) (7)(a)(i) Except as provided under Subsection (7)(b), Subsection 41-1a-215(2), Subsection 41-1a-215.5(2), and Section 41-1a-216, a license plate shall be renewed annually.
(7)(a)(ii) (7)(a)(ii)(A) The division shall issue the vehicle owner a month registration decal and a year registration decal upon the vehicle's first registration with the division.
(7)(a)(ii)(B) The division shall issue the vehicle owner only a year registration decal upon subsequent renewals of registration to validate registration renewal.
(7)(b) Beginning on January 1, 2025, the division shall issue one registration decal displaying both the month and year.
(7)(c) For a vehicle registered for a 24-month period as provided in Section 41-1a-215.5, the division may issue two 12-month decals for the 24-month registration period.
(8) (8)(a) Except as otherwise provided in Subsection (8)(b) and by rule:
(8)(a)(i) the month registration decal issued in accordance with Subsection (7) shall be displayed on the license plate in the left position; and
(8)(a)(ii) the year registration decal issued in accordance with Subsection (7) shall be displayed on the license plate in the right position.
(8)(b) Beginning on January 1, 2025, the registration decal shall be displayed on the upper right position.
(9) The current year registration decal issued in accordance with Subsection (7) shall be placed over or in place of the previous year registration decal.
(10) If a license plate or registration decal is lost or destroyed, a replacement shall be issued upon application and payment of the fees required under Section 41-1a-1211 or 41-1a-1212.
(11) (11)(a) A violation of this section is an infraction.
(11)(b) A court shall waive a fine for a violation under this section if:
(11)(b)(i) the registration for the vehicle was current at the time of the citation; and
(11)(b)(ii) the person to whom the citation was issued provides, within 21 business days, evidence that the license plate and registration decal are properly displayed in compliance with this section.
(12) In accordance with Title 63G, Chapter 3, Utah Administrative Rulemaking Act, the division may make rules regarding the placement and positioning of registration decal on a license plate issued by the division.