North Dakota § 43-19.1-21 Seals

North Dakota Statutes

§ 43-19.1-21 — Seals

North Dakota § 43-19.1-21

Title 43Occupations and Professions

Ch. 43-19.1Professional Engineers and Land Surveyors

This text of North Dakota § 43-19.1-21 (Seals) is published on Counsel Stack Legal Research, covering North Dakota primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

N.D. Cent. Code § 43-19.1-21 (2026).

Text

Each registrant under this chapter upon registration may obtain a seal of the design
authorized by the board, bearing the registrant's name, registration number, and the legend
"registered professional engineer" or "registered professional land surveyor". Final engineering
drawings, specifications, maps, plats, reports, or other documents prepared by a person
required to be registered under this chapter, when presented to a client, contractor,
subconsultant, or any public agency, must be signed, dated, and stamped with the seal or
facsimile of the seal. A working drawing or unfinished document must contain a statement to the
effect the drawing or document is preliminary and not for construction, recording purposes, or
implementation. It is unlawful for a registrant to affix or permit the r

Free access — add to your briefcase to read the full text and ask questions with AI

Each registrant under this chapter upon registration may obtain a seal of the design
authorized by the board, bearing the registrant's name, registration number, and the legend
"registered professional engineer" or "registered professional land surveyor". Final engineering
drawings, specifications, maps, plats, reports, or other documents prepared by a person
required to be registered under this chapter, when presented to a client, contractor,
subconsultant, or any public agency, must be signed, dated, and stamped with the seal or
facsimile of the seal. A working drawing or unfinished document must contain a statement to the
effect the drawing or document is preliminary and not for construction, recording purposes, or
implementation. It is unlawful for a registrant to affix or permit the registrant's seal and signature
or facsimiles thereof to be affixed to any engineering drawings, specifications, maps, plats,
reports, or other documents after the expiration or revocation or during the suspension of a
certificate, or for the purpose of aiding and abetting any other person to evade or attempt to
evade any provision of this chapter.