Indiana § 13-20-19-2 Requirements of coding

Indiana Statutes

§ 13-20-19-2 — Requirements of coding

Indiana § 13-20-19-2

Art. 20SOLID WASTE MANAGEMENT

Ch. 19Mandatory Coding of Plastic Containers

This text of Indiana § 13-20-19-2 (Requirements of coding) is published on Counsel Stack Legal Research, covering Indiana primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Ind. Code § 13-20-19-2 (2026).

Text

Each bottle and plastic container described in section 1 of this chapter must be coded. The coding must consist of a three (3) sided triangular arrow with a number in the center and letters underneath. The number and letters must indicate the resin from which the container is made as follows:

(1)One (1) and "PETE" for polyethylene terephthalate.

(2)Two (2) and "HDPE" for high density polyethylene.

(3)Three (3) and "V" for vinyl.

(4)Four (4) and "LDPE" for low density polyethylene.

(5)Five (5) and "PP" for polypropylene.

(6)Six (6) and "PS" for polystyrene.

(7)Seven (7) and "Other" for other materials, including multi-layer materials. [Pre-1996 Recodification Citation: 13-7-22-1(b).]

Free access — add to your briefcase to read the full text and ask questions with AI

Each bottle and plastic container described in
section 1 of this chapter must be coded. The coding must consist of a
three (3) sided triangular arrow with a number in the center and letters
underneath. The number and letters must indicate the resin from which
the container is made as follows:
(1) One (1) and "PETE" for polyethylene terephthalate.
(2) Two (2) and "HDPE" for high density polyethylene.
(3) Three (3) and "V" for vinyl.
(4) Four (4) and "LDPE" for low density polyethylene.
(5) Five (5) and "PP" for polypropylene.
(6) Six (6) and "PS" for polystyrene.
(7) Seven (7) and "Other" for other materials, including
multi-layer materials.
[Pre-1996 Recodification Citation: 13-7-22-1(b).]