PRESIDING JUSTICE GALLAGHER
delivered the opinion of the court:
Plaintiff, Lisa Wortel, appeals from the trial court’s order granting summary judgment entered against her in favor of defendant, Somerset Industries. We reverse and remand. In this opinion, we clarify that the existence of an open and obvious danger is not a per se bar to finding that a product is unreasonably dangerous because of defective design so as to subject a manufacturer to liability.
Facts
On May 13, 1996, plaintiff was injured at work when her left hand became caught in the rollers of a pizza dough rolling machine designed and manufactured by the defendant. On June 6, 1997, plaintiff filed a two-count complaint against defendant.
In count I of her complaint, plaintiff alleged that defendant was negligent in one or more of the following ways:
“a. Carelessly and negligently failed to provide a proper and adequate safety system on said machine;
b. Carelessly and negligently failed to provide proper and adequate warnings to notify users of various dangers associated with the machine; and,
c. Carelessly and negligently designed said machine in a manner so as to allow a machine user to cause her hand to come into contact with the machine’s rollers while the machine is in operation.”
In count II of her complaint, plaintiff alleged strict liability against defendant, claiming that the following conditions rendered the pizza dough rolling machine unreasonably dangerous:
“a. It was designed, manufactured, sold or otherwise placed in the stream of commerce with an inadequate safety system;
b. It was designed, manufactured, sold or otherwise placed in the stream of commerce with inadequate warnings concerning the safe operation of the machine; and,
c. It was designed, manufactured, sold or otherwise placed in the stream of commerce in a manner which allowed the user of said machine to expose the user’s limb to the roller portions of the machine while the machine remained in operation.”
In moving for summary judgment, defendant argued that any claimed danger regarding its pizza dough rolling machine was open and obvious and, therefore, could not be deemed unreasonably dangerous or defective and there also was no need to warn of such an open and obvious danger. After full briefing by the parties, the trial court granted defendant’s motion for summary judgment.
Standard of Review
Because the trial court, when deciding a motion for summary judgment, makes a determination as a matter of law, the trial court’s decision is entitled to no deference. Jarke v. Jackson Products, 258 Ill. App. 3d 718, 721, 631 N.E.2d 233, 236 (1994). Our review of the summary judgment granted to defendant is de novo. Petrovich v. Share Health Plan of Illinois, Inc., 188 Ill. 2d 17, 30, 719 N.E.2d 756, 764 (1999). Although summary judgment can aid in the expeditious disposition of a lawsuit, it is a drastic measure that should be allowed only “when the right of the moving party is clear and free from doubt.” Purtill v. Hess, 111 Ill. 2d 229, 240, 489 N.E.2d 867 (1986). Summary judgment is properly granted where the pleadings, depositions, admissions, affidavits and exhibits on file, when viewed in the light most favorable to the nonmoving party, show that there is no genuine issue as to any material fact and that the moving party is entitled to judgment as a matter of law. 735 ILCS 5/2 — 1005(c) (West 1998); Petrovich, 188 Ill. 2d at 30-31, 719 N.E.2d at 764. A triable issue of fact exists where there is a dispute as to a material fact or where, although the facts are not in dispute, reasonable minds might differ in drawing inferences from those undisputed facts. Petrovich, 188 Ill. 2d at 31, 719 N.E.2d at 764. At the summary judgment stage, a plaintiff is not required to establish his case as he would at trial, but he must present some factual basis that would arguably entitle him to a judgment. West v. Deere & Co., 145 Ill. 2d 177, 182, 582 N.E.2d 685, 687 (1991).
“A defendant who moves for summary judgment may meet its initial burden of production in at least two ways: (1) by affirmatively disproving the plaintiff’s case by introducing evidence that, if uncontroverted, would entitle the movant to judgment as a matter of law (traditional test) [citation], or (2) by establishing that the nonmovant lacks sufficient evidence to prove an essential element of the cause of action (Celotex test) [citations].” Williams v. Covenant Medical Center, 316 Ill. App. 3d 682, 688-89, 737 N.E.2d 662 (2000).
The Williams court further explained that it is the movant who bears the burden of persuasion and the initial burden of production. Williams v. Covenant Medical Center, 316 Ill. App. 3d 682, 737 N.E.2d 662 (2000). Thus, where a defendant is the movant, it is only when the defendant satisfies its initial burden of production that the burden shifts to the plaintiff to present some factual basis that would arguably entitle her to a judgment under the applicable law. Williams, 316 Ill. App. 3d at 689, 737 N.E.2d at 668. Here, because defendant failed to satisfy its initial burden, it was not entitled to summary judgment. Contrary to the dissent’s view, no burden shifted to the plaintiff. Moreover, contrary to the dissent’s statements, plaintiff here did present a factual basis that would arguably entitle her to a judgment. West v. Deere & Co., 145 Ill. 2d 177, 182, 582 N.E.2d 685, 687 (1991); Williams v. Covenant Medical Center, 316 Ill. App. 3d 682, 737 N.E.2d 662 (2000).
Strict Liability
The Illinois Supreme Court set forth the elements of an action sounding in strict liability in Suvada v. White Motor Co., 32 Ill. 2d 612, 210 N.E.2d 182 (1965). A plaintiff in a strict liability case must prove that a product was in an unreasonably dangerous condition, that the condition existed at the time it left the manufacturer’s control, and that the condition was a proximate cause of the plaintiffs injury. Suvada, 32 Ill. 2d at 623, 210 N.E.2d at 188.1 Ordinarily, the determination of whether a product is defective, and therefore unreasonably dangerous, is a question of fact for the jury. Korando v. Uniroyal Goodrich Tire Co., 159 Ill. 2d 335, 344, 637 N.E.2d 1020, 1024 (1994); see also Doser v. Savage Manufacturing & Sales, Inc., 142 Ill. 2d 176, 196, 568 N.E.2d 814, 823 (1990) (noting that whether product is unreasonably dangerous for failure to incorporate safety devices is question of fact that jury should resolve).
Consumer Expectation Test
In Hunt v. Blasius, 74 Ill. 2d 203, 212, 384 N.E.2d 368, 372 (1978), the Illinois Supreme Court determined that an exit sign post without a “break-away” design contained no legally cognizable defect, as there were no facts indicating that the post subjected motorists to any unexpected risks. In so doing, the court relied on section 402A of the Restatement (Second) of Torts and pronounced that strict liability applies only when a product is “ ‘dangerous to an extent beyond that which would be contemplated by the ordinary [person] ***, with the ordinary knowledge common to the community as to its characteristics.’ ” (Emphasis omitted.) Hunt v. Blasius, 74 Ill. 2d at 211-12, 384 N.E.2d at 372, quoting Restatement (Second) of Torts § 402A, Comment i (1965). This simple test has come to be known as the consumer contemplation test or the consumer expectation test. See W. Keeton, Prosser & Keeton on Torts § 99, at 698-99 (5th ed. 1984). Defendant, in its motion for summary judgment, citing Hunt v. Blasius and two other cases, relied exclusively on the consumer expectation test.
Under the consumer expectation test, “[i]njuries are not compensable *** if they derive merely from those inherent properties of a product which are obvious to all who come in contact with the product.” Hunt v. Blasius, 74 Ill. 2d at 211, 384 N.E.2d at 372, citing Genaust v. Illinois Power Co., 62 Ill. 2d 456, 467, 343 N.E.2d 465 (1976). Moreover, courts have decided that no warning is required when a danger is obvious. McColgan v. Environmental Control Systems, Inc., 212 Ill. App. 3d 696, 701, 571 N.E.2d 815, 818 (1991). The rationale for this rule is that nothing of value is gained by a warning where a danger is open and obvious and generally appreciated. McColgan, 212 Ill. App. 3d at 701, 571 N.E.2d at 818.
Plaintiff argues that the specific danger here was not open and obvious. Although it would appear that plaintiffs injury derived from the inherent property of the product, which was obvious to all, namely, to “pull” items “forward toward the rollers,” whether the items were pieces of dough, long sleeves, hair or, in the instant case, fingers, plaintiff argues that she did not expect, nor would any user, that a slight nudge of the dough would result in her fingers being dragged with the dough into the rollers because the combination of speed and rotational force upon viscous dough is not readily apparent. Plaintiff contends that the open and obvious risk described by the defendant is not the risk which precipitated plaintiffs injuries. Plaintiff distinguishes the general risk of the rollers when placing one’s hand deep enough into the machine so as to put it into “the depths of the location of the rollers,” from the specific risk of placing one’s hand into the machine not as close to the rollers and having the hand “dragged into” the rollers by the dough. Broken down to its essence, plaintiffs contention is that, despite the open and obvious risk of the rollers, the exact speed and force of the rollers could not be appreciated.
Although defendant has argued that “the risk of injury” was open and obvious, and further argued that plaintiff was subjectively aware of the risk, defendant has not directly addressed plaintiff’s argument regarding the existence of two distinct risks. We cannot say that the specific risk encountered by plaintiff of having one’s hand pulled unexpectedly into this machine after nudging the end of a piece of dough was, as a matter of law, open and obvious. A question of fact exists as to whether the dragging effect of the rollers caused by their speed and force presented an unexpected risk beyond those which would be contemplated by the average person. Hunt v. Blasius, 74 Ill. 2d at 211-12, 384 N.E.2d at 372. Because we conclude that there is a question of fact as to whether the risk here was open and obvious, defendant was not entitled to summary judgment on this basis.
More importantly, and a point that we believe is greatly in need of clarification, is that defendant’s motion for summary judgment, as to plaintiff s allegations of defective design,2 failed as a matter of law, regardless of whether the risk of injury was open or obvious. With the possible exception of a “simple” product (see Hansen v. Baxter Healthcare Corp., 198 Ill. 2d 420 (2002); Scoby v. Vulcan-Hart Corp., 211 Ill. App. 3d 106, 109-10, 569 N.E.2d 1147, 1149-50 (1991)), which is not the situation here, the open and obvious nature of the risk is not a per se bar to recovery in a design defect case. The consumer expectation test is not the exclusive test to be applied in a design defect case; Illinois permits a plaintiff an alternative method of proving an “unreasonably dangerous” design. In granting defendant’s motion for summary judgment, the trial court applied only the consumer expectation analysis that was raised in defendant’s motion and incorrectly decided that the open and obvious nature of the risk at issue precluded recovery.
Risk-Utility Test
In 1990, the Illinois Supreme Court explained that, under Illinois law, “[a] plaintiff may demonstrate that a product is defective in design, so as to subject a *** manufacturer to strict liability for resulting injuries, in one of two ways: (1) by introducing evidence that the product failed to perform as safely as an ordinary consumer would expect when used in an intended or reasonably foreseeable manner or (2) by introducing evidence that the product’s design proximately caused his injury and the defendant fails to prove that on balance the benefits of the challenged design outweigh the risk of danger inherent in such designs.” (Emphasis added.) Lamkin v. Towner, 138 Ill. 2d 510, 529, 563 N.E.2d 449, 457 (1990), citing generally Palmer v. Avco Distributing Corp., 82 Ill. 2d 211, 219-20, 412 N.E.2d 959 (1980), in turn citing Barker v. Lull Engineering Co., 20 Cal. 3d 413, 427-28, 573 P.2d 443, 452, 143 Cal. Rptr. 225, 234-35 (1978). Thus, it has been clear since 1990, under Illinois law, a plaintiff has had two alternative methods to prove a manufacturer’s liability for defective design. The second risk-benefit balancing test identified in Lamkin v. Towner has been referred to as the risk-utility or risk-benefit test. See Hansen v. Baxter Healthcare Corp., 198 Ill. 2d 420 (2002).3
Shortly before the Illinois Supreme Court expressly adopted the risk-utility test in design defect cases in Lamkin v. Towner, the implicit adoption of the similar test “expressly pretermitting the issue of feasible alternative design” in such cases was recognized by Justice Buckley in his dissenting opinion in Kutzler v. AMF Harley-Davidson, 194 Ill. App. 3d 273, 281, 550 N.E.2d 1236, 1241 (1990) (Buckley, P.J., dissenting). In his dissent, he acknowledged that “[t]he ‘consumer contemplation test’ has been subject to wide criticism by courts and commentators for its inadequacy as a test for evaluating whether a product is defective in design defect cases.” Kutzler, 194 Ill. App. 3d at 280, 550 N.E.2d at 1240 (Buckley, P.J., dissenting). More recently, one court noted that at least 24 states have now adopted some form of the risk-utility test for determining strict liability design defects as a result of the continued legal criticism of the consumer expectation test. See Holliday v. Sturm, Ruger & Co., 138 Md. App. 136, 176, 770 A.2d 1072, 1095-96 (2001) (Sonner, J., dissenting, joined by Hollander, J.).
Erior to Lamkin v. Towner, Illinois Supreme Court cases such as Palmer v. Avco Distributing Corp., 82 Ill. 2d 211, 412 N.E.2d 959 (1980), Kerns v. Engelke, 76 Ill. 2d 154, 390 N.E.2d 859 (1979), and Anderson v. Hyster Co., 74 Ill. 2d 364, 385 N.E.2d 690 (1979), had addressed only some aspects of the risk-utility test, such as feasibility of alternative designs. Thus, although evidence of a feasible design alternative is sometimes used to describe the risk-utility test, it is but one of several factors in the risk/benefit analysis. As the Barker court explained, “in evaluating the adequacy of a product’s design pursuant to [the risk-utility test], a jury may consider, among other relevant factors, the gravity of the danger posed by the challenged design, the likelihood that such danger would occur, the mechanical feasibility of a safer alternative design, and the adverse consequences to the product and to the consumer that would result from an alternative design.” Barker, 20 Cal. 3d at 431, 573 P.2d at 455, 143 Cal. Rptr. at 237.
One commentator has listed factors that might be considered by the jury under the risk-utility test as follows:
“(1) The usefulness and desirability of the product — its utility to the user and to the public as a whole.
(2) The safety aspects of the product — the likelihood that it will cause injury, and the probable seriousness of the injury.
(3) The availability of a substitute product which would meet the same need and not be as unsafe.
(4) The manufacturer’s ability to eliminate the unsafe character of the product without impairing its usefulness or making it too expensive to maintain its utility.
(5) The user’s ability to avoid danger by the exercise of care in the use of the product.
(6) The user’s anticipated awareness of the dangers inherent in the product and their avoidability, because of general public knowledge of the obvious condition of the product, or of the existence of suitable warnings or instructions.
(7) The feasibility, on the part of the manufacturer, of spreading the loss by setting the price of the product or carrying liability insurance.” J. Wade, On The Nature of Strict Tort Liability for Products, 73 Miss. L. J. 825, 837-38 (1973).
See also Harnischfeger Corp. v. Gleason Crane Rentals, Inc., 223 Ill. App. 3d 444, 454-55, 585 N.E.2d 166, 172-73 (1991).
The risk-utility test has also been described as follows:
“ ‘Under this approach, a product is defective as designed if, but only if, the magnitude of the danger outweighs the utility of the product. The theory underlying this approach is that virtually all products have both risks and benefits and that there is no way to go about evaluating design hazards intelligently without weighing danger against utility. There have been somewhat different ways of articulating this ultimate standard or test. But in essence, the danger-utility test directs attention of attorneys, trial judges, and juries to the necessity for weighing the danger-in-fact of a particular feature of a product against its utility. Under this test, a product can be said to be defective in the kind of way that makes it “unreasonably dangerous” if a reasonable person would conclude that the danger-in-fact, whether foreseeable or not, outweighs the utility of the product. There are three primary reasons for so concluding: (1) the harmful consequences in fact from intended and reasonably foreseeable uses resulting from the way the product was designed and marketed up to the time of plaintiff’s injury outweighed the benefits in terms of wants, desires, and human needs served by the product; (2) although the harmful consequences in fact did not exceed the benefits, alternative products were available to serve the same needs or desires with less risk of harm; (3) although the harmful consequences did not outweigh the benefits, there was a feasible way to design the product with less harmful consequences. Most of the products liability litigation related to design hazards has been concerned with the feasibility of a safer alternative design.’ ” Scoby v. Vulcan-Hart Corp., 211 Ill. App. 3d 106, 110, 569 N.E.2d 1147, 1150 (1991), quoting W. Keeton, Prosser & Keeton on Torts § 99(3), at 699-700 (5th ed. 1984).
In moving for summary judgment and arguing that there was no issue for a jury to decide, defendant failed to show that plaintiff would be unable to prove her design defect case by way of a risk-utility analysis; defendant did not address this alternative method of proof at all. Nonetheless, defendant now asserts that plaintiff has waived the risk-utility argument. We disagree.
In arguing that it was entitled to judgment as a matter of law under Hunt v. Blasius, defendant failed to realize that the existence of an open and obvious danger is not a per se bar to finding that a complex product, such as its pizza dough rolling machine, is unreasonably dangerous so as to subject a manufacturer to liability. Defendant relied exclusively on the consumer expectation test and failed to acknowledge that a plaintiff may now prove a design defect by way of a risk-utility analysis, the alternative method of proof recognized by Lamkin v. Towner.
In 1997, one court acknowledged the import of Lamkin v. Towner, noting that although other states had adopted Barker-type alternative tests, Illinois was one of only three jurisdictions4 that had adopted the burden-shifting risk-utility inquiry of Barker v. Lull. See Potter v. Chicago Pneumatic Tool Co., 241 Conn. 199, 212-13, 694 A.2d 1319, 1329-30 (1997) (containing comprehensive jurisdictional overview of risk-utility test). It has been noted by one commentator, and we agree, that the adoption of a risk-utility analysis by a court actually increases the defendant’s burden on summary judgment because the defendant must show that, by balancing the product’s risk against its utility, the lack of a defect is plain and indisputable. See 2 Am. L. Prod. Liab. § 28:16 (3d rev. ed. 1997). Defendant, by relying only on a consumer-expectation analysis, failed to do so. Thus, at the outset, defendant failed to meet its burden of showing it was entitled to judgment as a matter of law.
Defendant’s waiver argument shows that it misapprehends the burden placed upon a party who moves for summary judgment and also misunderstands that Lamkin v. Towner’s adoption of the risk-utility analysis as a way a plaintiff can now prove design defect has actually increased this burden. Contrary to the dissent’s view, we do not believe that Lamkin v. Towner imposed a burden on a plaintiff to choose and disclose which method of proof she shall use at trial. 331 Ill. App. 3d at 915 (“the plaintiff, in the context of this case, should be required to disclose whether she is relying on risk utility as a method of proving design defect”).
It is true that the thrust of plaintiffs response to defendant’s motion for summary judgment was that the risk from defendant’s machine was not “open and obvious.” This was a natural response because the sole basis of defendant’s motion for summary judgment was that its machine could not be deemed unreasonably dangerous, as a matter of law, because the risk of injury from its product was open and obvious. While it may have been helpful to the court below had plaintiff more fully developed the risk-utility argument or better addressed the risk-utility test with citation to Lamkin v. Towner or any other case applying the risk-utility test, this was not plaintiffs burden where defendant failed to meet its burden in the first instance. Moreover, as we have already noted, plaintiff here did present a factual basis that would arguably entitle her to a judgment and this is the only burden a plaintiff ever has at the summary judgment stage. We do not believe that a plaintiff “waives” at summary judgment a “method of proof.”
“The rule of waiver is, of course, a limitation on the parties and not the courts.” Geise v. Phoenix Co. of Chicago, Inc., 159 Ill. 2d 507, 514, 639 N.E.2d 1273 (1994). “[T]his court is not precluded from considering issues not properly preserved by the parties, and indeed has ‘the responsibility *** for a just result and for the maintenance of a sound and uniform body of precedent [that] may sometimes override the considerations of waiver that stem from the adversary character of our system.’ [Citation.]” (Emphasis added.) Jackson Jordan, Inc. v. Leydig, Voit & Mayer, 158 Ill. 2d 240, 251, 633 N.E.2d 627, 631 (1994); see also American Federation of State, County & Municipal Employees, Council 31 v. County of Cook, 145 Ill. 2d 475, 480, 584 N.E.2d 116, 118-19 (1991) (same). Defendant, as well as the trial court by granting summary judgment, incorrectly believed that the existence of an open and obvious danger constituted a per se bar to finding that a product is unreasonably dangerous. This error makes it incumbent upon this court to address the issue. We believe that our resolution of this issue is necessary in the interests of justice and to maintain a uniform body of precedent on this point. We are more certain of our need to clarify this area because defendant has presented an argument on appeal that is legally flawed, but also because of the dissent’s concerns about the confusion surrounding the application of the risk-utility test at the summary judgment stage. 331 Ill. App. 3d at 915.
While the open and obvious nature of a risk may preclude recovery in design defect cases under the consumer expectation test, it is just one of several factors to be considered by the jury under the risk-utility test. Defendant nonetheless, citing only Scoby v. Vulcan-Hart Corp., 211 Ill. App. 3d 106, 109, 569 N.E.2d 1147, 1151 (1991), and Todd v. Societe Bic, S.A., 21 F.3d 1402, 1411-12 (7th Cir. 1994) (applying Illinois law), states in its brief that “where the alleged danger is obvious, the risk utility test is not applicable.”5 Because this statement omits an additional factor considered by the courts in Scoby and Todd, namely, that the product be “simple,” defendant’s statement is simply wrong. Defendant has obviously misinterpreted Scoby. To further complicate matters, however, plaintiff has effectively ignored defendant’s contention, albeit erroneous, and has made no attempt to clarify or distinguish Scoby or Todd. This court has reminded counsel that a reviewing court is entitled to have issues clearly defined with relevant authority cited and a cohesive legal argument presented because the appellate court is not a depository in which the appellant may dump the burden of argument and research. Eickmeyer v. Blietz Organization, Inc., 284 Ill. App. 3d 134, 144, 671 N.E.2d 795, 802 (1996).
When, if ever, may a court determine that the risk-utility test is inapplicable as a matter of law? In Scoby, one of the few appellate court cases interpreting Lamkin v. Towner, the court carved out an exception to the applicability of the risk-utility test. The Scoby court, in affirming the trial court’s grant of summary judgment in favor of the manufacturer of a deep-fat fryer, stated as follows:
“We do not deem that Lamkin or other cases applying aspects of the danger-utility test intend that all manufacturers of products described above should be subject to liability depending upon a trier of fact’s balancing under that test, when suit is brought by one injured by such a product. Somewhere, a line must be drawn beyond which the danger-utility test cannot be applied. Considering not only the obvious nature of any danger here but, also, the simple nature of the mechanism involved, we conclude the circuit court properly applied only the consumer-user contemplation test.” (Emphasis added.) Scoby, 211 Ill. App. 3d at 112, 569 N.E.2d at 1151.
At the time Scoby was decided, at least one other jurisdiction, Michigan, had made a distinction between “simple” and complex tools or products for purposes of applying the open and obvious danger rule in product liability cases and had applied the rule in cases involving simple tools but had rejected the rule in cases involving more complex products. See T. Kruk, Products Liability: Modern Status of Rule That There Is No Liability for Patent or Obvious Dangers, 35 A.L.R.4th 861 (1985).
The Lamkin v. Towner court did not indicate that there was a limitation on the applicability of the risk-utility test, even though the product involved there was an arguably “simple” window screen. More recently, however, the Illinois Supreme Court addressed the Scoby court’s exception to the risk-utility test in the case of a simple product. Hansen v. Baxter Healthcare Corp., 198 Ill. 2d 420 (2002). The defendant in Hansen argued that a risk-utility analysis was inappropriate “because the device in question is simple and because the risks are well-known to the medical community that uses the device.” Hansen, 198 Ill. 2d at 436. The court, in rejecting the defendant’s argument, found Scoby inapposite, noting that there was no rational comparison between the product in issue, which was a friction-fit connector used to connect an IV tube to a catheter and the product in Scoby, which was a kettle of boiling oil. Hansen, 198 Ill. 2d at 437-38; see also Besse v. Deere & Co., 237 Ill. App. 3d 497, 502, 604 N.E.2d 998, 1002 (1992) (in which this court determined that a cornpicker combine with an attached cornhead mechanism was “not so simple in nature as to preclude application of the risk/benefit analysis test”). We find Scoby inapposite. Defendant has not argued nor can it be said that the pizza dough rolling machine here is simple; it is a complex machine. Thus, defendant’s assertion that the risk-utility test is inapplicable in the present case is incorrect.
Contrary to defendant’s assertion, even where an alleged danger from a product is obvious, the risk utility test is applicable. Indeed, it has been explained:
“One shortcoming of the [consumer expectation] test is that a victim could never recover for harm suffered as a result of a design hazard that was open or obvious, resulting in products not being found defective where they could easily have been designed safer without great expense or effect on the benefits or functions to be served by the product. [Citation.] This, as well as other deficiencies, prompted many jurisdictions to adopt in design defect cases an alternative approach to determining whether a product is unreasonably dangerous ***. [Citations.]” Kutzler, 194 Ill. App. 3d at 280, 550 N.E.2d at 1240 (Buckley, P.J., dissenting).
In Harnischfeger, although discussing the issue of open and obvious as it related to a duty to warn in a negligence action, the court explained that a “risk/benefit or danger/utility test *** obviously encompasses many more considerations than the relatively simple consumer-expectation test.” Harnischfeger Corp. v. Gleason Crane Rentals, Inc., 223 Ill. App. 3d 444, 456, 585 N.E.2d 166, 173-74 (1991).
As the Scoby court noted, in discussing the adoption in Lamkin v. Towner of the dual test for determining defective design, the Lamkin v. Towner court relied heavily on the decision of the Supreme Court of California in Barker, 20 Cal. 3d 413, 573 P.2d 443, 143 Cal. Rptr. 225. As the Barker court explained:
“[T]he expectations of the ordinary consumer cannot be viewed as the exclusive yardstick for evaluating design defectiveness because ‘[i]n many situations ... the consumer would not know what to expect, because he would have no idea how safe the product could be made.’ [Citation.] Numerous California decisions have implicitly recognized this fact and have made clear, through varying linguistic formulations, that a product may be found defective in design, even if it satisfies ordinary consumer expectations, if through hindsight the jury determines that the product’s design embodies ‘excessive preventable danger,’ or, in other words, if the jury finds that the risk of danger inherent in the challenged design outweighs the benefits of such design. [Citation.]” Barker, 20 Cal. 3d at 430, 573 P.2d at 454, 143 Cal. Rptr. at 236.
As Lamkin v. Towner clearly explained, the second method by which a plaintiff can show a design defect is “by introducing evidence that the product’s design proximately caused his injury and the defendant fails to prove that on balance the benefits of the challenged design outweigh the risk of danger inherent in such designs.” (Emphasis added.) Lamkin v. Towner, 138 Ill. 2d at 529, 563 N.E.2d at 457. The importance of this pronouncement, by which Illinois adopted Barker’s burden-shifting approach (see Potter v. Chicago Pneumatic Tool Co., 241 Conn. 199, 212-13, 694 A.2d 1319, 1329-30 (1997)), was noted earlier.
In casting the burden of proof in design cases upon the manufacturer, the Barker court explained:
“Because most of the evidentiary matters which may be relevant to the determination of the adequacy of a product’s design under the ‘risk-benefit’ standard!,] e.g., the feasibility and cost of alternative designs are similar to issues typically presented in a negligent design case and involve technical matters peculiarly within the knowledge of the manufacturer, we conclude that once the plaintiff makes a prima facie showing that the injury was proximately caused by the product’s design, the burden should appropriately shift to the defendant to prove, in light of the relevant factors, that the product is not defective.” Barker, 20 Cal. 3d at 431, 573 P.2d at 455, 143 Cal. Rptr. at 237.
Plaintiff responded to defendant’s motion by arguing that the issue regarding whether defendant’s machine was defective is a question of fact for a jury. Plaintiff retained a mechanical engineer, Ronald Lobodzinski, who presented himself for deposition by defendant prior to the trial court’s ruling on defendant’s motion for summary judgment. Mr. Lobodzinski, among other things, criticized the design of the feed opening on the machine, based upon the distance of the opening from the pinch point. He opined that the machine should provide guarding to prevent contact with the pinch-point hazard, and if guarding could not be achieved, a warning should be used. He also offered evidence of alternative designs, including that of one of defendant’s competitors, which would have eliminated the risk to which plaintiff was exposed. All of this evidence is related to the risk-utility method of proving a design defect. In her response, plaintiff included Mr. Lobodzinski’s opinions and clearly contended that she “has produced evidence that safer, alternative designs were available for that type of machine long before the design of the machine at issue in this case.” In view of this evidence, plaintiff clearly did not waive the risk-utility “argument.”
More importantly, defendant did not directly challenge these opinions or offer any evidence to refute these opinions. Because doing so may have served only to create a genuine issue of material fact, we question the need for the dissent’s advisory statement that “If plaintiff intends to utilize [the risk-utility test as a] method of proof, then the defendant should be given the opportunity to move for summary judgment in the context of the risk-utility test.” 331 Ill. App. 3d at 915.
We further disagree with the dissent’s proposed directive to the trial court regarding how to resolve such a defense motion based on the risk-utility test and the requirement that there be a question of fact “as to whether there was a reasonable and safer alternative design at the time of the manufacture of the product.” 331 Ill. App. 3d at 915. In 1979, the Illinois Supreme Court left open the question of whether a plaintiff must prove alternative design feasibility. Kerns, 76 Ill. 2d at 163-64, 390 N.E.2d at 863-64. This court later held: “In light of the Kerns decision, and until the Illinois Supreme Court determines otherwise, we believe the rule of law in Illinois is that evidence of alternative design feasibility is relevant and admissible in a design defect case, but it is not an essential element of such a case if the finder of fact can be persuaded in the absence of such evidence that the defect in design rendered the product unreasonably dangerous.” Seward v. Griffin, 116 Ill. App. 3d 749, 766, 452 N.E.2d 571, 558 (1983). The test introduced in 1990 by the Illinois Supreme Court in Lamkin v. Towner specifically requires the defendant “to prove that on balance the benefits of the challenged design outweigh the risk of danger inherent in such designs.” Lamkin v. Towner, 138 Ill. 2d at 529, 563 N.E.2d at 457. Thus, we conclude, contrary to the dissent, that there is no requirement that a plaintiff must present evidence of a feasible alternative design in order to survive summary judgment.
Conclusion
Based on the foregoing, the trial court erroneously granted summary judgment to defendant. The sum and substance of defendant’s motion for summary judgment was that, pursuant to Hunt v. Blasius, as a matter of law, its product, a pizza dough rolling machine, could not be deemed unreasonably dangerous because the risk of injury from the machine was open and obvious. This simple statement, standing alone, no longer represents an accurate statement of strict products liability law in Illinois, pursuant to the Illinois Supreme Court’s 1990 decision in Lamkin v. Towner. We hold, therefore, that the existence of an open and obvious danger is not a per se bar to finding that a product is unreasonably dangerous, based upon defective design, so as to subject a manufacturer to liability. Accordingly, the decision of the circuit court of Cook County granting summary judgment to defendant is reversed and this cause is remanded.
Reversed and remanded.
BUCKLEY, J., concurs.