United States v. Columbia Steel Co.

334 U.S. 495, 68 S. Ct. 1107, 92 L. Ed. 2d 1533, 1948 U.S. LEXIS 2714
Supreme Court of the United States·Decided June 21, 1948·No. 461·Published·Cited by 317 cases

Opinions

Mr. Justice Reed

delivered the opinion of the Court.

The United States brings this suit under § 4 of the Sherman Act to enjoin United States Steel Corporation and its subsidiaries from purchasing the assets of the largest independent steel fabricator on the West Coast on the ground that such acquisition would violate §§ 1 and 2 of the Sherman Act.1 The complaint, filed on February 24,1947, charged that if the contract of sale between United States Steel and Consolidated Steel Corporation were carried out, competition in the sale of rolled steel [499]*499products and in fabricated steel products would be restrained, and that the contract indicated an effort on the part of United States Steel to attempt to monopolize the market in fabricated steel products. After a trial before a single judge in the district court, judgment was entered in favor of the defendants, and the government brought the case here by direct appeal. 32 Stat. 823, 15 U. S. C. § 29.

The underlying facts in the case are set forth in the findings of the trial court, and with a few exceptions those findings are not disputed by the government. We rely chiefly on the findings to indicate the nature of the commerce here in question and the extent to which competition would be affected by the challenged contract.

The steel production involved in this case may be spoken of as being divided into two stages: the production of rolled steel products and their fabrication into finished steel products. Rolled steel products consist of steel plates, shapes, sheets, bars, and other unfinished steel products and are in turn made from ingots by means of rolling mills. The steel fabrication involved herein may also be divided into structural fabrication and plate fabrication. Fabricated structural steel products consist of building framework, bridges, transmission towers, and similar permanent structures, and are made primarily from rolled steel shapes, although plates and other rolled steel products may also be employed. Fabricated plate products, on the other hand, consist of pressure vessels, tanks, welded pipe, and similar products made principally from rolled steel plates, although shapes and bars are also occasionally used. Both plate and structural fabricated products are made to specifications for a particular purpose; fabricated products do not include standard products made by repetitive processes in the manufacture of general steel merchandise such as wire, nails, bolts, and [500]*500window frames. The manufacture of such standardized finished products is not involved in this case. The facilities required for structural fabrication are quite different from those required for plate fabrication; the former require equipment for shearing, punching, drilling, assembling, and riveting or welding structural shapes whereas the latter require equipment for bending, rolling, cutting, and forming the plates which go into the finished product.

The complaint lists four defendants: Columbia Steel Company, Consolidated Steel Corporation, United States Steel Corporation, and United States Steel Corporation of Delaware. United States Steel and its subsidiaries engage in the business of producing rolled steel products and in structural fabrication, but do no plate fabrication work. Consolidated Steel, the sale of whose assets the government seeks to enjoin, is engaged only in structural fabrication and plate fabrication. United States Steel with its subsidiaries is the largest producer of rolled steel products in the United States, with a total investment of more than a billion and a half dollars. During the ten-year period 1937-1946 United States Steel produced almost exactly a third of all rolled steel products produced in the United States, and average sales for that period were nearly a billion and a half dollars. In the five-year period 1937-1941, average sales were a little over a billion dollars. Consolidated, -by contrast, had plants whose depreciated value was less than ten million dollars. During the five-year period 1937-1941, Consolidated had average sales of only twenty million dollars, and the United States Steel committee which negotiated the terms of the purchase of Consolidated estimated that Consolidated’s sales in the future would run to twenty-two million dollars annually and agreed with Consolidated on a purchase price of slightly in excess of eight million dollars. During the war Consolidated produced over a [501]*501billion and a half dollars worth of ships with government-furnished facilities. Consolidated no longer possesses any facilities for building ships.2

Columbia Steel, a wholly-owned subsidiary of United States Steel, has been the largest rolled steel producer in the Pacific Coast area since 1930, with plants in Utah and California, and has also served as selling agent for other rolled steel subsidiaries of United States Steel, and for two subsidiaries of that company engaged in structural fabrication, the American Bridge Company at Pittsburgh and the Virginia Bridge Company at Roanoke, Virginia, though neither it nor any other subsidiary of United States Steel in the Consolidated market area was a fabricator of any kind. National Tube Company, another United States Steel subsidiary, sells pipe and tubing. Consolidated has structural fabricating plants near Los Angeles and at Orange, Texas, and plate fabricating facilities in California and Arizona. Consolidated has sold its products during the past ten years in eleven states, referred to hereafter as the Consolidated market: Arizona, California, Idaho, Louisiana, Montana, Nevada, New Mexico, Oregon, Texas, Utah and Washington. It is that market which the government views as significant in determining the extent of competition between United States Steel and Consolidated. It is not the usual Pacific [502]*502and Mountain states groups employed by the Census.3 United States Steel Corporation of Delaware is a subsidiary of United States Steel which renders technical assistance to other subsidiaries engaged in steel production.

Rolled steel products have traditionally been sold on a basing point system.4 Prior to World War II rolled steel was sold oh the West Coast at a price computed on the basis of eastern basing points, even though both United States Steel and Bethlehem Steel produced rolled steel products in California. Fabricators such as Consolidated thus did not get the full benefit of their proximity to the western market. The competitive disadvantages under which western fabricators worked is illustrated by the fact that United States Steel has been the largest seller of fabricated structural steel in the Consolidated market, even though it has no fabricating plants in the area. During the ten-year period ending in 1946, 100 different concerns bid successfully in competition with United States Steel for the sale of fabricated structural products [503]*503in the Consolidated market; 50 of those concerns are located outside the area. United States Steel’s principal competitor as measured on a national basis, Bethlehem Steel, does have fabricating facilities in California, however, and prior to World War II United States Steel had prepared plans for the erection of fabricating facilities in California. The war made it necessary to postpone the plans.

Free access — add to your briefcase to read the full text and ask questions with AI

United States v. Columbia Steel Co., 334 U.S. 495, 68 S. Ct. 1107, 92 L. Ed. 2d 1533, 1948 U.S. LEXIS 2714 (1948).

334 U.S. 495 (United States v. Columbia Steel Co.) — published by Counsel Stack Legal Research, free access to 12M+ legal documents.

Related

Lockheed Martin Corp. v. Boeing Co.
390 F. Supp. 2d 1073 (M.D. Florida, 2005)
Palmer v. Gotta Have It Golf Collectibles, Inc.
106 F. Supp. 2d 1289 (S.D. Florida, 2000)
Hunter Douglas, Inc. v. Comfortex Corp.
44 F. Supp. 2d 145 (N.D. New York, 1999)
Bristol Technology, Inc. v. Microsoft Corp.
42 F. Supp. 2d 153 (D. Connecticut, 1998)
Corsearch v. Thomson & Thomson
792 F. Supp. 305 (S.D. New York, 1992)
United States v. Syufy Enterprises
712 F. Supp. 1386 (N.D. California, 1989)
Tasty Baking Co. v. Ralston Purina, Inc.
653 F. Supp. 1250 (E.D. Pennsylvania, 1987)
Reazin v. Blue Cross & Blue Shield of Kansas, Inc.
635 F. Supp. 1287 (D. Kansas, 1986)
Hayden Pub. Co., Inc. v. Cox Broadcasting Corp.
566 F. Supp. 503 (E.D. New York, 1983)
Ab Iro v. Otex, Inc.
566 F. Supp. 419 (D. South Carolina, 1983)
Betaseed, Inc. v. U & I Inc.
681 F.2d 1203 (Ninth Circuit, 1982)
McDonald v. Johnson & Johnson
537 F. Supp. 1282 (D. Minnesota, 1982)
United States v. American Telephone & Telegraph Co.
524 F. Supp. 1336 (District of Columbia, 1981)
JBL Enterprises, Inc. v. Jhirmack Enterprises, Inc.
509 F. Supp. 357 (N.D. California, 1981)
Eastern Dental Corp. v. Isaac Masel Co., Inc.
502 F. Supp. 1354 (E.D. Pennsylvania, 1980)
Levitch v. Columbia Broadcasting System, Inc.
495 F. Supp. 649 (S.D. New York, 1980)
Lektro-Vend Corp. v. Vendo Corp.
500 F. Supp. 332 (N.D. Illinois, 1980)