Southeastern Sheet Metal Joint Apprenticeship Training Fund v. Barsuli

950 F. Supp. 1406, 1997 WL 16825
CourtDistrict Court, E.D. Wisconsin
DecidedJanuary 15, 1997
Docket93-C-967
StatusPublished
Cited by7 cases

This text of 950 F. Supp. 1406 (Southeastern Sheet Metal Joint Apprenticeship Training Fund v. Barsuli) is published on Counsel Stack Legal Research, covering District Court, E.D. Wisconsin primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Southeastern Sheet Metal Joint Apprenticeship Training Fund v. Barsuli, 950 F. Supp. 1406, 1997 WL 16825 (E.D. Wis. 1997).

Opinion

DECISION AND ORDER

RANDA, District Judge.

This matter comes before the Court on the parties’ cross-motions for summary judg *1409 ment. For the following reasons, plaintiffs’ motion for summary judgment is granted and the defendant’s motion is denied.

FACTS

Boiled down to its essentials, this case is basically a collection action. The National Training Fund for the Sheet Metal and Air Conditioning Industry (“the National Fund”) is a multi-employer apprenticeship and training trust fund established pursuant to 29 U.S.C. § 1001 et seq. (Defendant’s Proposed Findings of Fact (“DFOF”) at ¶ 1; Plaintiffs Response to Defendant’s Proposed Findings of Fact (“PR”) at 1.) So too, the Southeastern Sheet Metal Joint Apprenticeship Training Fund (“the Local Fund”) is a multiemployer apprenticeship and training fund established pursuant to 29 U.S.C. § 1001 et seq. (DFOF at IF 2; PR at 1.) The Local Fund operates in Kenosha, Racine and Walworth counties in the State of Wisconsin. (Id.) Marc De Jaríais (“Jaríais”) is a fiduciary of the Local Fund. (Id.) A separate entity, called the Southeastern Sheet Metal Joint Apprenticeship Training Committee (“the Local Committee”), is a joint labor-management committee which is regulated by, and assists, the State of Wisconsin— Department of Industry, Labor and Human Relations — Bureau of Apprenticeship Standards (“DILHR-BAS”) in the operation of sheet metal apprenticeship programs within Kenosha, Racine and Walworth counties. (DFOF at ¶ 3; PR at 1.) The Local Fund and the Local Committee share the same office in Racine, Wisconsin. (DFOF at ¶ 6; PR at 1.) They share the same equipment and the same files. (Id.) They employ the same individual, Lois Young, for secretarial assistance and they even use the same stationary and envelopes. (Id.) Nevertheless, while the National Fund, the Local Fund and Jaríais are party-plaintiffs in this action, the Local Committee is not a party to this action.

On or around October 29, 1986, Joseph Barsuli (“Barsuli”) signed an Apprentice Indenture (“the Indenture”) with the Local Committee. (Krawczyk Aff., Ex. G.) The Indenture committed Barsuli to a five-year apprenticeship in the Local Committee’s Environmental Systems Technician Apprenticeship Program (“EST”). (DFOF at ¶ 10; PR at 1.) The EST apprenticeship is to be distinguished from the budding trades Sheet Metal Apprenticeship Program (“SMA”), which is another apprenticeship program run by the Local Committee. (Jaríais Dep. at 12-13.) The EST program trains individuals in the servicing of air conditioning, heating and refrigeration units. (Id.). The SMA program trains individuals in the actual fabrication of sheet metal into various configurations. (Id.) Thus, SMA apprentices learn how to “set” heating and air conditioning units and form or install the ductwork, while EST apprentices learn how to subsequently run the wiring to such units, optically control the rooms they heat or cool, start the units up, and maintain or repair the units. (Id.) To this end, the EST program calls for certain specified hours of training in the areas of “Air Balance”, “Start-Up and Certification of Comfort Systems”, “Basic Installation— Heating and Cooling”, “Maintenance & Warranties”, “Equipment Connections to Energy Source”, etc. (Krawczyk Aff., Ex. K.)

In accordance with federal and state regulations, the EST Indenture Barsuli signed was subsequently filed with, and approved by, DILHR-BAS. (DFOF at ¶ 12; PR at 1.) Also in accordance with federal regulations, the EST apprenticeship program in which Barsuli participated was properly “registered” with either the United States Department of Labor — Bureau of Apprenticeship and Training (“BAT”) or DILHR-BAS. (DFOF at ¶ 13; PR at 1.) Subsequently, on or around March 3, 1987, Barsuli signed the first of five separate Sheet Metal Scholarship Loan Agreements (“SLA’s”). (Krawczyk Aff., Ex. D.) The SLA’s were not filed with any federal or state authority. (DFOF at ¶23; PR at 1.) The SLA’s were virtually identical form documents pre-signed and supplied by the National Fund. (PR, ¶ 3 at 4; Defendant’s Reply to Plaintiffs’ Response to Defendant’s Proposed Findings of Fact (“DRPR”), ¶3 at 9; Jaríais Dep. at 28.) Under the express terms of the SLA’s, Barsuli warranted that he “understands and agrees that the Local Committee and the National Training Fund will expend significant sums of money for the training of [Barsuli] in the specialized skills necessary for *1410 employment in the Sheet Metal Industry; ____” (Id.) Barsuli agreed, within each SLA, to a specific dollar value for these expenditures, itemized as “the cost of the training, including books, manuals, necessary equipment, instructors’ salaries (where applicable) and related materials, ... [and] indirect and intangible value and worth”. (Id.) He warranted that he “understands that these considerable expenditures will be repaid to the NTF and the Local Committee by [his] working in the Sheet Metal Industry resulting in contributions being made to the NTF and the Local Committee pursuant to Collective Bargaining Agreements.” (Id.) Specifically, Barsuli would “receive a credit for each calendar year” he worked for a contributing employer, for a total of ten years, at which time the loan would be repaid “in-kind”. (Id.) In this regard, Barsuli also agreed “that he ... will neither seek nor accept employment from an Employer engaged in, nor become an Employer engaged in, any general, mechanical sheet metal, testing and balancing, roofing, residential, sign or food service work or any other work covered by the Constitution of the Sheet Metal Workers’ International Association unless such employment is performed under the terms of a collective bargaining agreement that provides for the payment of contributions by such Employer to the NTF or to the Local Committee____” (Id.) If Barsuli breached the agreement by accepting sheet metal work from a non-contributing employer, he agreed that “all amounts due and owing on the Scholarship Loan, reduced by any credit received by [Barsuli] ..., or by any cash payments made, will become immediately due and payable, together with interest at the prime interest rate then prevailing at the Riggs National Bank in Washington, D.C., from the date of breach.” (Id.) In addition, in the event of such a breach, Barsuli agreed that he “will be liable for all costs of collection, including reasonable attorneys’ fees.” (Id.)

Barsuli signed an SLA form for each of the five years of his apprenticeship. 1 (Id.) As preprinted forms supplied by the National Fund, each SLA referred to the National Fund and the Local Committee as the parties to the contract providing the loan to Barsuli. (Id.) The Local Fund is not referenced anywhere in the agreements. (Id.) Moreover, Lois Young, who is employed by both the Local Fund and the Local Committee, typed in the name of the Local Committee, not the Local Fund, under the “Notices” provision of each agreement, as that is the name called for by the preprinted form.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

United Assn. Local 168, Apprentice Educational Fund v. Robinson
2025 Ohio 2421 (Ohio Court of Appeals, 2025)
State Auto Insurance Companies v. Whirlpool Corp.
62 F. Supp. 3d 857 (W.D. Wisconsin, 2014)
Washicheck v. Ultimate Ltd.
231 F.R.D. 550 (W.D. Wisconsin, 2005)
CFI of Wisconsin, Inc. v. Hartford Fire Insurance
230 F.R.D. 552 (W.D. Wisconsin, 2005)
Holland v. Fahnestock & Co.
210 F.R.D. 487 (S.D. New York, 2002)

Cite This Page — Counsel Stack

Bluebook (online)
950 F. Supp. 1406, 1997 WL 16825, Counsel Stack Legal Research, https://law.counselstack.com/opinion/southeastern-sheet-metal-joint-apprenticeship-training-fund-v-barsuli-wied-1997.