R.C. Maxwell Co. v. Galloway Township

13 N.J. Tax 519
CourtNew Jersey Tax Court
DecidedDecember 9, 1993
StatusPublished
Cited by6 cases

This text of 13 N.J. Tax 519 (R.C. Maxwell Co. v. Galloway Township) is published on Counsel Stack Legal Research, covering New Jersey Tax Court primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
R.C. Maxwell Co. v. Galloway Township, 13 N.J. Tax 519 (N.J. Super. Ct. 1993).

Opinion

LARIO, J.T.C.

Plaintiffs have appealed from a judgment of the Atlantic County Board of Taxation affirming the municipality’s levying of an omitted assessment, as real property, on billboards located on premises identified as Block 1204.01, Lot 7.02 on the tax map of Galloway Township.

Plaintiffs have now filed a motion for summary judgment seeking a declaration that the billboards are not taxable as real property. The municipality has filed a reply in opposition to plaintiffs’ motion and a cross-motion for summary judgment seeking a ruling that billboards are taxable locally as real property and dismissing plaintiffs’ appeal. The sole issue presented by these motions is the taxability of the billboards as real property; the quantum of the assessment is not in dispute.

[522]*522It appears that the omitted assessment in this case was instigated by an opinion issued to tax assessors by the Attorney General of New Jersey on behalf of the Director, Division of Taxation, declaring that billboards are taxable by municipalities as real property. By reason thereof, the Outdoor Advertising Association of New Jersey was granted leave to appear as amicus curiae and the Director, Division of Taxation, was permitted to intervene for the sole purpose of opposing the application for tax exemption and joining in defendant’s cross-motion for summary judgment.

The land in issue is owned by Scola, Inc. and a portion thereof is leased to The R.C. Maxwell Company (Maxwell) which has erected thereon four wooden billboards that display outdoor advertising. In their verification, plaintiffs described the billboards substantially as follows:

The billboards which are the subject of the assessments are mainly comprised of wooden structures. They are assembled using the A-frame construction methodology. Wood is the primary basic component of these billboards which typically have 12 feet by 25 feet, or 14 feet by 48 feet, faces. There are also metal components such as bolts and nails. The A-frame structure supports a sign face which is made of either wood panels or sheet metal on a wood frame.

The A-frame apparatus of a billboard with a 14' x 48' face is comprised of the following:

A. Seven main uprights 4" x 6" x 30' of cedar or treated timbers

B. Seven anchors 4" x 6" x 10' of cedar or treated timbers

C. Seven downbraces 2" x 6" x 30' of spruce lumber

D. Platform (350 lineal feet) 2" x 8" of spruce lumber

E. Crossbracing (275 lineal feet) 2" x 6" of spruce lumber

F. Stringers (232 lineal feet) 2" x 6" of spruce lumber

[523]*523G. Sign face 12 4' x 14' medium density overlay wooden sections or sheet metal sections on a wood frame

The components of a billboard with a 12 foot x 25 foot face are the same, except they are smaller and fewer in number.

Once a sign location is laid out, the billboard is constructed on site. For the 14 foot x 48 foot-face sign, seven 4 inch by 6 inch uprights are installed to a depth of six feet. The area is backfilled and tamped down. Seven anchors are likewise installed about 12 to 15 feet behind the uprights. Downbracing is then erected and bolted to the anchors at the top of the uprights. The stringers are then attached horizontally to the uprights and, lastly, the face is attached to the stringers.

The backbraces are bolted to the uprights and anchors at both ends of the structure. Likewise, the platform bracing is also bolted. The stringers are nailed to the uprights. The other components are nailed to each other with galvanized nails. The galvanized nail used in this fashion makes it work much like a wood screw. This construction technique is faster and cheaper but nearly as effective as if the lumber had been screwed together.

The uprights, because in direct contact with the earth and subject to accelerated decay, must be replaced about every ten years. The entire structure would be replaced within eight to ten years on average, assuming there has been a lease renewal.

The sign face carries the advertising copy. A face made of wood panels is attached to the stringers by use of the galvanized nails which are crimped. The crimping provides strength to the jointed parts. A sheet-metal face is mounted on a frame which is then attached to the stringer. For sheet-metal faces, the advertising copy is placed on sheets of paper which is applied to the sign face up to six layers. For the wooden faces, the advertising copy is painted-on either at the location or at Maxwell’s shops in Atlantic City or Trenton. In the latter case, the wooden panels containing the old copy are removed and replaced with other [524]*524wooden panels containing the new copy. The replaced panels are either taken to another location or returned to one of the shops for application of new advertising- copy. Painting at the shops is more prevalent in the winter months.

A number of the assessed billboards are illuminated. Illuminated billboards have the following additional items:

1. One hundred amp service panel with timer clock;
2. Six quartz or fluorescent fixtures;
3. A maximum of one hundred ten lineal feet of rigid pipe;
4. A service entrance cable; and,
5. A ground rod.

The service panel and light fixtures are attached to the bottom of the billboard. The rigid pipe within which the service cable is located is attached to the billboard and runs to the electrical service. The ground rod is affixed to the ground and connected by wire to the billboard.

Maxwell further alleges that approximately 85 per cent of its billboard signs are made of wood. There is a constant need for new or recycled parts. Maxwell has an on-going maintenance program for all of its locations, including its wooden signs. The component parts are replaced when damaged by the elements or rotted out. Subject to the environmental conditions of each site, a wood component is generally in need of replacement about eight to ten years after installation. Regardless of whether the billboard has a 12 foot by 25 foot or 14 foot by 48 foot advertising surface, wood components in good condition are largely salvageable. The components permitting illumination are nearly all salvageable. As for the lumber components, the main uprights, anchors and sign faces can be reused in their entirety, if still sound. Approximately 80% of the .downbracing, platform, crossbracing and stringers are likewise salvageable and reusable, if sound.

Maxwell also claims in the event an advertising location is lost, it salvages the component parts of the location unless they are beyond their useful life and these salvaged parts are reused at another existing or new location.

[525]*525The billboards are taken apart as follows. The light fixtures are disassembled first. The face is then removed and the individual components follow in the reverse order of the assembly process. The nails and bolts are removed. The nails are lifted out with a hammer. The bolts and nuts are separated.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

R.C. Maxwell Co. v. Galloway Township
679 A.2d 141 (Supreme Court of New Jersey, 1996)
Emmis Broadcasting Corp. v. Borough of East Rutherford
16 N.J. Tax 29 (New Jersey Superior Court App Division, 1996)
Van Wingerden v. Lafayette Township
15 N.J. Tax 475 (New Jersey Tax Court, 1996)
Freehold Township v. Javin Partnership
15 N.J. Tax 88 (New Jersey Tax Court, 1995)
R.C. Maxwell Co. v. Galloway Township
15 N.J. Tax 187 (New Jersey Superior Court App Division, 1995)
Emmis Broadcasting Corp. of N.Y. v. East Rutherford Borough
14 N.J. Tax 524 (New Jersey Tax Court, 1995)

Cite This Page — Counsel Stack

Bluebook (online)
13 N.J. Tax 519, Counsel Stack Legal Research, https://law.counselstack.com/opinion/rc-maxwell-co-v-galloway-township-njtaxct-1993.