Pepcol Mfg. Co. v. Commissioner

98 T.C. No. 11, 98 T.C. 127, 1992 U.S. Tax Ct. LEXIS 14
CourtUnited States Tax Court
DecidedFebruary 5, 1992
DocketDocket No. 38290-86
StatusPublished
Cited by15 cases

This text of 98 T.C. No. 11 (Pepcol Mfg. Co. v. Commissioner) is published on Counsel Stack Legal Research, covering United States Tax Court primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Pepcol Mfg. Co. v. Commissioner, 98 T.C. No. 11, 98 T.C. 127, 1992 U.S. Tax Ct. LEXIS 14 (tax 1992).

Opinions

OPINION

TANNENWALD, Judge:1

Respondent determined a deficiency of $138,340 in petitioner's Federal income tax for the taxable year ending February 29, 1980. The issue for decision is whether petitioner's bone-processing equipment qualifies for the investment tax credit as energy property under section 48(1)(6).2

This case was submitted to the Court fully stipulated pursuant to Rule 122. The stipulated facts are found accordingly.

At the time the petition in this case was filed, petitioner's principal office was located in Denver, Colorado. For its taxable year ending February 29, 1980, petitioner filed a timely Federal income tax return with the Internal Revenue Service Center in Ogden, Utah.

Petitioner engages in the processing of various animal parts. The animal parts obtained by petitioner are a waste from the meat fabrication industry. During the taxable year at issue, petitioner operated three different types of processing facilities. Two of petitioner's operations are typical rendering facilities. The third type of facility operated by petitioner in the year at issue processes only animal bones. This bone-processing facility was constructed in 1979 and placed in service in January 1980. It is physically separated from the rendering operations. Prior to the year at issue, petitioner did not operate a facility which solely processed animal bones.

The primary product of the bone-processing facility is gelatin bone. Substantially all of the gelatin bone is sold to the photographic industry as a raw material for use as a coating on film. Other uses for gelatin bone include coating of pharmaceutical products as well as an ingredient in food products such as gelatin.

Petitioner constructed the bone-processing facility to utilize an advance in the method of production, processing, and marketing of meat known as “boxed-beef” fabrication. Boxed-beef is meat which has been cut from the bone, trimmed, and is ready for sale to the retail consumer. In this process, the animal is slaughtered, dressed, and packaged for human consumption in a single processing facility. A substantial increase occurred in the volume of animal bones produced at a centralized location as a result of boxed-beef fabrication. The typical rendering process is unable to consume the volume of bones produced by boxed-beef fabricators due to the decreased protein content of the meat and bone meal and the need for a typical rendering process to use the proper mixture of animal bones and other materials. Further, animal bones are not easily transportable due to potential contamination. The bones must be disposed of quickly after the animal is slaughtered and dressed. These factors resulted in the inability of boxed-beef fabricators to utilize or dispose of the entire volume of animal bones through established commercial channels.

Petitioner's bone processing starts with the receipt of the animal bones from the boxed-beef fabricators. The animal bones are then chopped and ground into a fine particle consistency. The bone particle is then made into a slurry by adding water. The mixture is heated and pumped into a decanter which separates the slurry into liquids and solids through a centrifugal process. The liquid consists of fats while the solids are the remaining bone material. After separation, the bone material is dried and sized, with the larger pieces of bone material being used for gelatin bone. The smaller bone pieces are used for bone meal.

In processing animal bones, there is no commercially marketable product produced prior to the production of gelatin bone. Further, petitioner's bone-processing facility does not process animal bones beyond the point at which gelatin bone is produced.

We must decide whether petitioner's facility for processing animal bones constitutes “recycling equipment” as defined in section 48(1)(6) and is therefore entitled to the investment credit as “energy property” as provided in section 48(1)(2)(A)-(iv). Section 48(1)(6) reads as follows:

(6) Recycling equipment.—
(A) IN GENERAL. — The term “recycling equipment” means any equipment which is used exclusively—
(i) to sort and prepare solid waste for recycling, or
(ii) in the recycling of solid waste.
(B) CERTAIN EQUIPMENT NOT INCLUDED. — The term recycling equipment does not include—
(i) any equipment used in a process after the first marketable product is produced, or
(ii) in the case of recycling iron or steel, any equipment used to reduce the waste to a molten state and in any process thereafter.
(C) 10 PERCENT VIRGIN MATERIAL ALLOWED. — Any equipment used in the recycling of material which includes some virgin materials shall not be treated as failing to meet the exclusive use requirements of subparagraph (A) if the amount of such virgin materials is 10 percent or less.
(D) CERTAIN EQUIPMENT INCLUDED. — The term “recycling equipment” includes any equipment which is used in the conversion of solid waste into a fuel or into useful energy such as steam, electricity, or hot water.

Section 38(b) states that the Secretary “shall provide such regulations as may be necessary to carry out the purposes” of subpart B, which includes section 48.

Pursuant to that authority, section 1.48-9, Income Tax Regs., was promulgated and reads, in pertinent part, as follows:

(g) Recycling equipment — (1) In general. Recycling equipment is equipment used exclusively to sort and prepare, or recycle, solid waste (other than animal waste) to recover usable raw materials ( recovery equipment”) or to convert solid waste (including animal waste) into fuel or other useful forms of energy (“conversion equipment”). Recycling equipment may include certain other onsite related equipment.
(2) Recovery equipment. Recovery equipment includes equipment that — •
(i) Separates solid waste from a mixture of waste,
(ii) Applies a thermal, mechanical, or chemical treatment to solid waste to ensure the waste will properly respond to recycling, or
(iii) Recycles solid waste to recover usable raw materials, but not beyond occurrence of the first of the following:
(A) The point at which a material has been created that can be used in beginning the fabrication of an end-product in the same way as materials from a virgin substance. Examples are the fiber stage in textile recycling, the newsprint or paperboard stage in paper recycling, and the ingot stage for other metals (other than iron or steel). In the case of recycling iron or steel, recycling equipment does not include any equipment used to reduce solid waste to a molten state or any process thereafter.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Western Nat'l Mut. Ins. Co. v. Commissioner
102 T.C. No. 11 (U.S. Tax Court, 1994)
Pepcol Manufacturing Co. v. Commissioner
28 F.3d 1013 (Tenth Circuit, 1993)
Nalle v. C.I.R.
Fifth Circuit, 1993
Griffin Industries, Inc. v. United States
27 Fed. Cl. 183 (Federal Claims, 1992)
Ying v. Commissioner
99 T.C. No. 14 (U.S. Tax Court, 1992)
Sim-Air, USA, Ltd. v. Commissioner
98 T.C. No. 15 (U.S. Tax Court, 1992)
Pepcol Mfg. Co. v. Commissioner
98 T.C. No. 11 (U.S. Tax Court, 1992)

Cite This Page — Counsel Stack

Bluebook (online)
98 T.C. No. 11, 98 T.C. 127, 1992 U.S. Tax Ct. LEXIS 14, Counsel Stack Legal Research, https://law.counselstack.com/opinion/pepcol-mfg-co-v-commissioner-tax-1992.