Paul Muller Industrie GmbH & Co. v. United States

435 F. Supp. 2d 1241, 30 Ct. Int'l Trade 1257, 30 C.I.T. 1257, 28 I.T.R.D. (BNA) 1729, 2006 Ct. Intl. Trade LEXIS 82
CourtUnited States Court of International Trade
DecidedMay 26, 2006
DocketConsol. 04-00522
StatusPublished
Cited by7 cases

This text of 435 F. Supp. 2d 1241 (Paul Muller Industrie GmbH & Co. v. United States) is published on Counsel Stack Legal Research, covering United States Court of International Trade primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Paul Muller Industrie GmbH & Co. v. United States, 435 F. Supp. 2d 1241, 30 Ct. Int'l Trade 1257, 30 C.I.T. 1257, 28 I.T.R.D. (BNA) 1729, 2006 Ct. Intl. Trade LEXIS 82 (cit 2006).

Opinion

OPINION

WALLACH, Judge.

I

Introduction

Plaintiffs Paul Mueller Industrie, GmbH & Co. (“Paul Mueller”); FAG Kugelfischer AG, FAG Italia S.p.A., Barden Corporation (U.K.) Limited, FAG Bearings Corporation, and the Barden Corporation (“collectively FAG”); SKF USA Inc., SKF France S.A., Sarma, SKF GmbH, and SKF Industrie S.P.A. (collectively “SKF”); *1243 and Timken U.S. Corporation (“Timken”) challenge the United States Department of Commerce’s (“Commerce” or “the Department”) findings in Antifriction Bearings and Parts Thereof From France, Germany, Italy, Japan, Singapore, and the United Kingdom: Final Results of Antidumping Duty Administrative Reviews, Rescission of Administrative Reviews in Part, and Determination To Revoke Order in Part, 69 Fed.Reg. 55,574 (September 15, 2004) (“Final Results ”) with regard to zeroing in the calculation of Plaintiffs’ antidumping duty margins. The Final Results were amended in Ball Bearings and Parts Thereof From Germany; Amended Final Results of Antidumping Duty Administrative Review, 69 Fed.Reg. 63,507 (November 2, 2004). The court has jurisdiction pursuant to 28 U.S.C. § 1581(c) (2004).

II

Background

On September 15, 2004, Commerce published in the Federal Register the Final Results of its review of the antidumping duty orders on antifriction bearings and parts thereof from France, Germany, Italy, Japan, Singapore, and the United Kingdom covering the period of review (“POR”) of May 1, 2002, through April 30, 2003. Final Results at 55,574. The scope of this order covers antifriction balls, ball bearings with integral shafts, ball bearings (including radial ball bearings) and parts thereof, and housed or mounted ball bearing units and parts thereof. 1 Id. at 55,575. In the Final Results, Commerce found a 5.25% weighted-average dumping margin for SKF France and Sarma, 2.49% for SKF GmbH, 1.38% for SKF Industrie S.p.A., 0.36% for Paul Mueller, 5.59% for FAG, and 4.79% for FAG Italia, S.p.A. See id. at 55,580.

On April 5, 2005, the court consolidated all the cases challenging the Final Results of the thirteenth administrative review. 2 Oral argument was held on April 26, 2006.

Ill

Standard of Review

This court will sustain Commerce’s determinations, findings, or conclusions unless it is “unsupported by substantial evidence on the record, or otherwise not in accordance with law.” 19 U.S.C. § 1516a(b)(1)(B) (2004); Magnesium Corp. of Am. v. United States, 166 F.3d 1364, 1368 (Fed.Cir.1999); see also Micron Technology, Inc., v. United States, 117 F.3d 1386, 1393 (Fed.Cir.1997). Substantial evidence is deemed to be “such relevant evidence as a reasonable mind might accept as adequate to support a conclusion.” Universal Camera Corp. v. NLRB, 340 U.S. 474, 477, 71 S.Ct. 456, 95 L.Ed. 456 (1951) (quoting Consol. Edison Co. v. NLRB, 305 U.S. 197, 229, 59 S.Ct. 206, 83 *1244 L.Ed. 126 (1938)). Although the courts have considered substantial evidence to be something less than the weight of the evidence, the possibility of drawing two inconsistent conclusions from the presented evidence does not necessarily prevent an administrative agency’s finding from being supported by substantial evidence. Consolo v. Fed. Mar. Comm’n, 383 U.S. 607, 619-20, 86 S.Ct. 1018, 16 L.Ed.2d 131 (1966) (citing Labor Board v. Nevada Con-sol. Copper Corp., 316 U.S. 105, 106, 62 S.Ct. 960, 86 L.Ed. 1305 (1942); Keele Hair & Scalp Specialists, Inc., et al. v. FTC, 275 F.2d 18, 21 (5th Cir.1960)).

The court utilizes a two-step analysis to as, instructed by the Supreme Court, to determine the level of deference applicable to Commerce’s statutory interpretation. Chevron U.S.A. Inc. v. Nat. Res. Def. Council, Inc. et al., 467 U.S. 837, 842-43, 104 S.Ct. 2778, 81 L.Ed.2d 694 (1984); see also Pesquera Mares Australes Ltda. v. United States, 266 F.3d 1372, 1382 (Fed.Cir.2001). The court examines, first, whether “Congress has directly spoken to the precise question at issue,” in which case, courts “must give effect to the unambiguously expressed intent of Congress.” See Household Credit Servs., Inc. v. Pfennig, 541 U.S. 232, 239, 124 S.Ct. 1741, 158 L.Ed.2d 450 (2004) (quoting Chevron, 467 U.S. at 842-3, 104 S.Ct. 2778). Whenever Congress has “explicitly left a gap for the agency to fill,” the agency’s regulation is “given controlling weight unless [it is] arbitrary, capricious, or manifestly contrary to the statute.” Chevron, 467 U.S. at 843-44, 104 S.Ct. 2778. ‘When faced with a problem of statutory construction, this Court shows great deference to the interpretation given the statute by the officers or agency charged with its administration. ‘To sustain the [agency’s] application of this statutory term, we need not find that its construction is the only reasonable one, or even that it is the result we would have reached had the question arisen in the first instance in judicial proceedings.’ ” Udall v. Tollman, 380 U.S. 1, 16, 85 S.Ct. 792, 13 L.Ed.2d 616 (1965) (quoting Unemployment Compensation v. Aragon, 329 U.S. 143, 153, 67 S.Ct. 245, 91 L.Ed. 136 (1946)).

IV

ANALYSIS

A

Commerce’s Practice of Zeroing Is Supported by Substantial Evidence and Is In Accordance With Law

Free access — add to your briefcase to read the full text and ask questions with AI

Related

NMB Singapore Ltd. v. United States
533 F. Supp. 2d 1244 (Court of International Trade, 2007)
Corus Staal BV v. United States
515 F. Supp. 2d 1337 (Court of International Trade, 2007)
Koyo Seiko Co., Ltd. v. United States
516 F. Supp. 2d 1323 (Court of International Trade, 2007)
Paul Muller Industries Gmbh & Co. v. United States
502 F. Supp. 2d 1271 (Court of International Trade, 2007)
Skf USA Inc. v. United States
491 F. Supp. 2d 1354 (Court of International Trade, 2007)
Paul Muller Industrie GmbH & Co. v. United States
442 F. Supp. 2d 1363 (Court of International Trade, 2006)

Cite This Page — Counsel Stack

Bluebook (online)
435 F. Supp. 2d 1241, 30 Ct. Int'l Trade 1257, 30 C.I.T. 1257, 28 I.T.R.D. (BNA) 1729, 2006 Ct. Intl. Trade LEXIS 82, Counsel Stack Legal Research, https://law.counselstack.com/opinion/paul-muller-industrie-gmbh-co-v-united-states-cit-2006.