Painton & Company, Ltd., Plaintiff-Appellee-Cross-Appellant v. Bourns, Inc., Defendant-Appellant-Cross-Appellee

442 F.2d 216, 15 Fed. R. Serv. 2d 983, 169 U.S.P.Q. (BNA) 528, 1971 U.S. App. LEXIS 10519
CourtCourt of Appeals for the Second Circuit
DecidedApril 27, 1971
Docket34959_1
StatusPublished
Cited by63 cases

This text of 442 F.2d 216 (Painton & Company, Ltd., Plaintiff-Appellee-Cross-Appellant v. Bourns, Inc., Defendant-Appellant-Cross-Appellee) is published on Counsel Stack Legal Research, covering Court of Appeals for the Second Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Painton & Company, Ltd., Plaintiff-Appellee-Cross-Appellant v. Bourns, Inc., Defendant-Appellant-Cross-Appellee, 442 F.2d 216, 15 Fed. R. Serv. 2d 983, 169 U.S.P.Q. (BNA) 528, 1971 U.S. App. LEXIS 10519 (2d Cir. 1971).

Opinion

FRIENDLY, Circuit Judge:

Painton & Company, Ltd., plaintiff in this action in the District Court for the Southern District of New York, in which federal jurisdiction was based on diverse citizenship, 28 U.S.C. § 1332(a) (2), is a British corporation engaged in the manufacture and sale of electronic components. Defendant Bourns, Inc., a California corporation, having its principal place of business in that state but doing business in New York, is likewise so engaged. The controversy concerns Pain-ton’s continued right to use information, relating to electronic circuit components known as potentiometers, which was supplied by Bourns under an agreement that has expired.

I.

Painton had developed and had been manufacturing and selling a lead screw actuated linear motion potentiometer known as Flatpot. Bourns had been developing, manufacturing, and selling more technologically advanced potentiometers, including one known as Trim-pot. In August 1958 the two companies entered into an agreement whereby Bourns contracted to furnish Painton, on a confidential basis, engineering and manufacturing services and techniques necessary to enable Painton to manufacture lead screw actuated linear motion potentiometers. The agreement was to continue for a term of eight years and thereafter until either party, on six months notice, elected to terminate or modify it. Painton was to pay fees on all products covered by the agreement, which excluded Flatpot, on a scale descending from 5% of the net selling prices in the first year to 2%% in the sixth and thereafter. If these were insufficient to accrue fees of $5,000 in any two-year period, Bourns could cancel the agreement on 60 days notice. There was no provision for post-termination payments by Painton, other than for those which were “due and payable or becoming due prior to the date of such termination,” and the agreement was silent with respect to its post-termination rights to use the information supplied thereunder.

In 1960 the earlier agreement was superseded by another which included, in addition, worm gear potentiometers. As in the 1958 agreement, the term was for eight years and thereafter until either party, on six months notice, elected to terminate or modify. The fee was to be 31/2% of the net selling prices except that on Flatpot there was a sliding scale ranging downward from 4% in the first year to 2% % in the fourth and thereafter. There was the same clause as to termination for failure to accrue minimum fees of $5,000 in any two-year period. Again there was no provision for post-termination payments by Painton, other than for those specified in the 1958 agreement; and again the agreement was silent with respect to its post-termination rights. Under both agreements Painton had an exclusive right to manufacture and sell the covered products in certain areas— Western Europe and Australia in the 1958 agreement, all of Europe, Australasia and Africa in the 1960 agreement. There were many other provisions, but this summary is sufficient for present purposes.

On March 25, 1962, Bourns sent a letter purportedly terminating the agreement as revised in 1960 for failure by Painton to make payments — within the time required — for materials, supplies, and completed units sent to it by Bourns. Painton retained American counsel who challenged the validity of Bourns’ action and subsequently brought suit in a related matter to enjoin Bourns from selling, marketing, or distributing its products *219 in Europe, Australasia, and Africa in violation of the 1960 agreement. There ensued an extensive exchange of correspondence and meetings looking toward the execution of a new agreement more satisfactory to Bourns. The negotiations, which we shall later discuss in detail, culminated in a new agreement dated November 1,1962. Its provisions important to the present controversy were as follows:

a) Paragraphs 1 and 2. All previous agreements, save several separate sales agreements not here relevant, were canceled and all claims under them were released except for amounts owing to Bourns from fees or from the sale of products, parts, or materials.

b) Paragraph 3. The products subject to the agreement were “[a] 11 models heretofore, or hereafter during the term of this Agreement” manufactured by Bourns of worm gear or lead screw actuated potentiometers; the Flatpot and modifications thereof; and other devices manufactured by Bourns as might be mutually agreed.

c) Paragraph It, entitled “License Granted,” read in pertinent part as follows: Bourns hereby agrees to furnish to Painton during the term hereof, engineering and manufacturing services and techniques, which include specifications, drawings, equipment designs and circuitry, cost breakdowns, operations descriptions, and other information necessary to enable Painton to manufacture Bourns’ products covered by this Agreement. Information shall be provided by Bourns on models not now manufactured by Painton to a maximum of 2 models per year for the term of this Agreement, such models to be selected by Painton.

Bourns grants to Painton the exclusive right and license to use such information in the geographical area defined in this Agreement. Bourns shall provide complete drawings and specifications for the products covered by this Agreement. Additional information pertaining to design, know-how and manufacturing techniques shall be made available at Bourns’ plant at 1200 Columbia Avenue, Riverside, California, to authorized personnel of Painton at all reasonable times.

d) Paragraph 5. With the exception of non-wire-wound elements, improvements made by either party were to be available to the other. “No change in the design of Bourns’ products covered hereby may be made by Painton without written consent of Bourns.”

e) Paragraph 6, entitled “Term of Agreement,” read as follows:

Unless otherwise terminated as herein provided, this Agreement shall terminate at midnight October 24, 1968, California time. Howevei’, although this Agreement may have been terminated, Painton shall pay the fees provided herein either through termination date or for a four (4) year period after achieving a production rate of 500 pcs. per month on any given model other than the “Flatpot,” whichever date is later.

f) Paragraph 7 provided that “[t]he license herein granted to Painton shall be exclusive in the territory indicated.” Bourns was not to license others to manufacture the covered products in such area or do so itself “during the period of this Agreement.” Paragraph 11 restricted Painton’s manufacturing and sales to the British Isles except that any of three affiliated organizations of Painton might sell products manufactured by Painton in territories specified in separate sales and distribution agreements being separately negotiated. These territories were Scandinavia, Benelux, Australia, and New Zealand.

g) Paragraph 8, entitled “Fees,” required Painton to pay 5% of the net selling price “for products manufae- *220

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Altavion, Inc. v. Konica Minolta System Laboratory, Inc.
226 Cal. App. 4th 26 (California Court of Appeal, 2014)
Mattel, Inc. v. MGA ENTERTAINMENT, INC.
782 F. Supp. 2d 911 (C.D. California, 2011)
Wells Fargo Bank, N.A. v. LaSalle Bank National Ass'n
643 F. Supp. 2d 1014 (S.D. Ohio, 2009)
Teller v. Teller
53 P.3d 240 (Hawaii Supreme Court, 2002)
Pryor v. USX Corp.
806 F. Supp. 460 (S.D. New York, 1992)
Pharmaceutical Society of New York, Inc. v. Cuomo
856 F.2d 497 (Second Circuit, 1988)
Medicare&Medicaid Gu v. Cuomo
856 F.2d 497 (Second Circuit, 1988)
Norton J. Lehman v. Dow Jones & Company, Inc.
783 F.2d 285 (Second Circuit, 1986)
Knapp v. Holiday Inns, Inc.
682 S.W.2d 936 (Court of Appeals of Tennessee, 1984)
Ruckelshaus v. Monsanto Co.
467 U.S. 986 (Supreme Court, 1984)
TAYLOR CONSTRUCTION CO. v. Hilton Hotels Corp.
678 P.2d 1152 (Nevada Supreme Court, 1984)
St. Regis Paper Co. v. United States
6 Ct. Int'l Trade 213 (Court of International Trade, 1983)
Saw Mill Broadcasters, Inc. v. Moore
561 F. Supp. 1139 (S.D. New York, 1983)

Cite This Page — Counsel Stack

Bluebook (online)
442 F.2d 216, 15 Fed. R. Serv. 2d 983, 169 U.S.P.Q. (BNA) 528, 1971 U.S. App. LEXIS 10519, Counsel Stack Legal Research, https://law.counselstack.com/opinion/painton-company-ltd-plaintiff-appellee-cross-appellant-v-bourns-ca2-1971.