Oasis Tooling, Inc. v. Siemens Industry Software, Inc.

CourtDistrict Court, D. Delaware
DecidedMarch 31, 2023
Docket1:22-cv-00151
StatusUnknown

This text of Oasis Tooling, Inc. v. Siemens Industry Software, Inc. (Oasis Tooling, Inc. v. Siemens Industry Software, Inc.) is published on Counsel Stack Legal Research, covering District Court, D. Delaware primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Oasis Tooling, Inc. v. Siemens Industry Software, Inc., (D. Del. 2023).

Opinion

IN THE UNITED STATES DISTRICT COURT FOR THE DISTRICT OF DELAWARE

OASIS TOOLING, INC., ) ) Plaintiff, ) ) v. ) Civil Action No. 22-151-CJB ) SIEMENS INDUSTRY SOFTWARE, ) INC., ) ) Defendant. ) ____________________________________) ) OASIS TOOLING, INC., ) ) Plaintiff, ) ) v. ) Civil Action No. 22-312-CJB ) GLOBALFOUNDRIES U.S., INC., ) ) Defendant. )

Philip A. Rovner and Jonathan A. Choa, POTTER ANDERSON & CORROON LLP, Wilmington, DE; Paul J. Andre, Lisa Kobialka, James Hannah and Timothy Layden, KRAMER LEVIN NAFTALIS & FRANKEL LLP, Menlo Park, CA; Aaron M. Frankel and Cristina Martinez, KRAMER LEVIN NAFTALIS & FRANKEL LLP, New York, NY, Attorneys for Plaintiff.

Karen Jacobs and Cameron P. Clark, MORRIS, NICHOLS, ARSHT & TUNNELL LLP, Wilmington, DE; Kristin L. Cleveland, Mark W. Wilson, Salumeh R. Loesch and John D. Vandenberg, KLARQUIST SPARKMAN, LLP, Portland, OR; Kristina R. Cary, KIRKLAND & ELLIS LLP, Boston, MA; Gregg F. LoCascio, P.C., Michael A. Pearson, Jr. and Matthew J. McIntee, KIRKLAND & ELLIS LLP, Washington, D.C., Attorneys for Defendant Siemens Industry Software, Inc.

Brian E. Farnan and Michael J. Farnan, FARNAN LLP, Wilmington, DE; Clement Naples, LATHAM & WATKINS LLP, New York, NY; Gabriel K. Bell, LATHAM & WATKINS LLP, Washington, D.C.; Thomas W. Yeh, LATHAM & WATKINS LLP, Los Angeles, CA; Daniel S. Todd, LATHAM & WATKINS LLP, San Francisco, CA, Attorneys for Defendant GlobalFoundries U.S. Inc. MEMORANDUM OPINION March 31, 2023 Wilmington, Delaware

Chacatapeher Oh Feante Pending before the Court in these patent infringement cases are motions filed by Defendant Siemens Industry Software, Inc. (“Siemens”) and Defendant GlobalFoundries U.S. Inc. (“GF” and collectively with Siemens, “Defendants”), pursuant to Federal Rule of Civil Procedure 12(b)(6) (the “Motions”). (Civil Action No. 22-151-CJB, D.I. 13; Civil Action No. 22-312-CJB, D.I. 14) With their Motions, Defendants argue that the patents asserted against them—United States Patent Nos. 7,685,545 (the “545 patent”) and 8,266,571 (the ‘571 patent”)}—are directed to patent-ineligible subject matter pursuant to 35 U.S.C. § 101 (“Section 101”). Plaintiff Oasis Tooling, Inc. (“Oasis” or “Plaintiff’) opposes the Motions. For the reasons that follow, the Court DENIES the Motions. 1. BACKGROUND A. Factual Background The two patents-in-suit, both titled “Methods and Devices for Independent Evaluation of Cell Integrity, Changes and Origin in Chip Design for Production Workflow,” share a common specification.! The '545 patent issued on March 23, 2010 from U.S. Appl. No. 12/536,413,

1 As such, the Court will cite below only to the '545 patent, unless otherwise noted.

which was filed on August 5, 2009. ('545 patent at 1)2 The '571 patent issued on September 11, 2012 from U.S. Appl. No. 12/482,296, which was filed on June 10, 2009. ('571 patent at 1) The patents relate to systems and methods for the granular analysis of design data utilized to prepare chip designs for manufacturing and to identify similarities and differences among design data residing in files. ('545 patent, Abstract; see also D.I. 1 at ¶ 15)3 The named inventors of the

asserted patents include Thomas Grebinski, who founded Oasis in 2004. ('545 patent at 1; '571 patent at 1; D.I. 1 at ¶¶ 3, 13-14) Oasis develops software for the semiconductor and fabrication industry. (D.I. 1 at ¶ 10) Designing a chip is an iterative process, and chip designs are broken into hundreds of thousands of pieces known as “cells” which are grouped into “blocks[.]” ('545 patent, cols. 1:39- 40, 4:38-39) Chip designs are created using different design tools and can be written in different design languages. (Id., col. 4:12-15) Designing and manufacturing chips is a complex and expensive process. (See, e.g., id., cols. 2:13-14, 3:64-4:4) The “Background of the Invention” section of the asserted patents explains that cells and

blocks proceed through the chip design process at different rates; this process begins with internal development of cells and release by a design template vendor; the process continues thereafter as the cell and block designs cycle through multiple revisions. ('545 patent, col. 1:44- 47) Keeping track of the most recent version of cells and blocks in a chip design is difficult.

2 The patents-in-suit are attached as exhibits to the relevant Complaints. (Civil Action No. 22-151-CJB, D.I. 1, exs. 1-2; Civil Action No. 22-312-CJB, D.I. 1, exs. 1-2) Herein, the Court will cite to the patents by their patent number.

3 For simplicity’s sake, hereafter the Court will refer to the “D.I.” number in Civil Action No. 22-151-CJB, unless otherwise indicated. (Id., col. 1:47-49) A design ready for release to production could involve as many as 40,000 unique cells. (Id., col. 2:12-13) When chip production starts, it is essential that the cells and blocks of the design are the correct version. (Id., cols. 3:66-4:1) Indeed, using the incorrect version “can cost millions of

dollars and months of delay[,]” and the potential for using an obsolete version of a cell is “everywhere[.]” (Id., col. 4:1-4; see also id., cols. 1:54-55, 2:12-15) At the time of the inventions, existing design data management tools lacked an auditing capability that would allow project managers to verify that the cells in a chip design are of the latest approved version, or to determine whether a proposed design update would be usable in a design approaching the final “tapeout” process. (Id., cols. 2:15-20, 4:22-31) In order to track and find changes in cell data in a file during the design of a circuit, a designer might have to manually analyze millions of lines of data, typically using a differencing tool.4 (Id., col. 2:22- 26) However, the use of differencing tools had some drawbacks. These tools were not able to take into account differences in design language (e.g., whether different inputs are used in

different languages that nevertheless mean the same thing), nor were they able to analyze whether certain changes were significant or had a functional impact on the chip being produced. (Id., col. 2:25-32; see also Civil Action No. 22-312-CJB, D.I. 15 at 3) Accordingly, sometimes a design team would not discover an out-of-date file until the problematic design returned from manufacturing. ('545 patent, col. 1:57-59) Another problem with then-existing chip-level design template management systems was that they could not effectively determine when parts of different chip designs included the same

4 According to Defendants, running a differencing tool is akin to running a “redline” in a word processor. (Civil Action No. 22-312-CJB, D.I. 15 at 3) cells. (Id., col. 4:8-10, 18-21) For example, when a yield problem was discovered in a product that utilized a particular design template, it was difficult to determine what other projects used that same template. (Id., col. 1:49-52) In light of these problems, the patent specification highlights a need to develop new tools

to analyze design data—and more specifically to enable “granular evaluation of design data at various junctures in the design work flow.” (Id., col. 2:63-65) Such tools may result in work flows and product designs that are improved, more error free, more transparent and more resilient. (Id., col. 2:63-67) The inventors of the asserted patents set out to provide tools and methods to allow for such granular analysis of design data and to enable the identification of meaningful similarities and differences in design data files. (Id., col.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

CLS Bank International v. Alice Corp. Pty. Ltd.
717 F.3d 1269 (Federal Circuit, 2013)
Ddr Holdings, LLC v. hotels.com, L.P.
773 F.3d 1245 (Federal Circuit, 2014)
Internet Patents Corporation v. Active Network, Inc.
790 F.3d 1343 (Federal Circuit, 2015)
Enfish, LLC v. Microsoft Corporation
822 F.3d 1327 (Federal Circuit, 2016)
Berkheimer v. Hp Inc.
881 F.3d 1360 (Federal Circuit, 2018)
Cellspin Soft, Inc. v. Fitbit, Inc.
927 F.3d 1306 (Federal Circuit, 2019)
SAP Am., Inc. v. InvestPic, LLC
898 F.3d 1161 (Federal Circuit, 2018)

Cite This Page — Counsel Stack

Bluebook (online)
Oasis Tooling, Inc. v. Siemens Industry Software, Inc., Counsel Stack Legal Research, https://law.counselstack.com/opinion/oasis-tooling-inc-v-siemens-industry-software-inc-ded-2023.