N.A.R., S.P.A. v. United States

741 F. Supp. 936, 14 Ct. Int'l Trade 409, 14 C.I.T. 409, 1990 Ct. Intl. Trade LEXIS 251
CourtUnited States Court of International Trade
DecidedJune 26, 1990
DocketCourt 88-06-00401
StatusPublished
Cited by36 cases

This text of 741 F. Supp. 936 (N.A.R., S.P.A. v. United States) is published on Counsel Stack Legal Research, covering United States Court of International Trade primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
N.A.R., S.P.A. v. United States, 741 F. Supp. 936, 14 Ct. Int'l Trade 409, 14 C.I.T. 409, 1990 Ct. Intl. Trade LEXIS 251 (cit 1990).

Opinion

OPINION

TSOUCALAS, Judge:

Plaintiff, N.A.R., S.p.A. (“NAR”), brings this- action pursuant to section 516A(a)(2)(B)(iii) of the Tariff Act of 1930, as amended, 19 U.S.C. § 1516a(a)(2)(B)(iii) (1988), to contest the final results of an antidumping duty administrative review covering pressure sensitive plastic tape from Italy. The ITA determined therein that an antidumping margin of 6.39 percent existed on NAR’s sales of the tape in the United States. 1 The basis for the Court’s jurisdiction is 28 U.S.C. § 1581(c) (1988).

Background

NAR is an Italian manufacturer and exporter of pressure sensitive plastic tape to the United States. The ITA’s review covers plastic tape manufactured by NAR which entered the United States between October 1, 1985 and September 30, 1986. On October 1, 1986, NAR requested that the ITA conduct an administrative review of an outstanding antidumping duty order for that period.

Before issuing its preliminary determination, the ITA, on November 18, 1986, sent *938 out a questionnaire requesting that NAR indicate, within 45 days, whether any differences existed between the types of merchandise sold in the home market (Italy) or to third countries, and the merchandise sold in the United States. Further, the ITA requested that NAR acknowledge any differences between the cost of manufacturing the merchandise sold in the home market and the cost of manufacturing the merchandise sold in the United States. NAR responded on February 18, 1987, but did not address the question of cost differences. The ITA requested again that NAR provide cost differences, or explain why no cost differences were provided.

NAR’s subsequent response noted that “the only difference in the product sold in the home market and the product sold in the U.S. market is the size of the rolls.” NAR Deficiency Response (July 23, 1987) in Administrative Record, Public Reel (“Public Reel ”) at 125. The rolls of tape sold in Italy come in sizes of 66 meters (short) and 990 meters (long), whereas in the United States a short roll is 50 meters and a long roll is 914 meters. NAR again did not specify any cost differences and claimed that this was because their accounting techniques did not provide for such distinctions. Id.

The ITA subsequently released the preliminary results of this administrative review. Pressure Sensitive Plastic Tape From Italy; Preliminary Results of Anti-dumping Duty Administrative Review and Intent to Revoke in Part, 53 Fed.Reg. 550 (Jan. 8, 1988). A margin of 2.06 percent was found to exist on NAR’s sales of pressure sensitive plastic tape in the United States. Id. However, no adjustments were made for cost differences in the manufacture of the differently sized rolls, and the ITA excluded from their calculations all rolls of tape less than 50 meters, the size of the short rolls sold in the U.S. Additionally, in making this computation, the ITA used indirect selling expenses in the U.S. to offset commissions paid in the home market.

Petitioner, Minnesota Mining and Manufacturing Company (“3M”), filed comments based on these results. 3M contended that the ITA’s failure to make cost adjustments for differently sized tape rolls distorted the dumping margin in NAR’s favor, since the longer tape sold in Italy was cheaper to produce on a per square meter basis than the shorter tape sold in the U.S. The difference is attributable to a cost difference per square meter in the “core cost” and the “slitting cost.” As the same size core is used regardless of how much tape is wound around it, the cost declines as the length of the roll increases. The slitting cost is the cost of cutting the tape to a particular length. Slitting cost differences are related to additional labor and variable overhead costs as a result of the need for more slitting, resulting in higher costs incurred, to produce the shorter rolls. SM Comments (Sept. 14, 1987) in Public Reel at 156.

The ITA, in its final determination, chose to make adjustments for these physical differences. 53 Fed. Reg 16,444. A new margin of 6.39 percent was found in NAR’s U.S. sales. The increase was attributed to differences found in the cost figures of another Italian tape manufacturer, Manuli, which were used as best information available to adjust for the physical differences.

Plaintiff now contests these results on three major grounds. First, NAR asserts that the increased margin is a result of the ITA’s acceptance of 3M’s comments, which NAR suggests are not supported by substantial evidence in the administrative record, or otherwise not in accordance with law. NAR questions the need to make cost adjustments for differences in the physical characteristics of the merchandise. Alternatively, if the Court finds there is such a need, NAR questions the use of another manufacturer’s cost data as best information available. But, if the use of another manufacturer’s cost data is held to be appropriate, NAR asserts that the ITA should have used that manufacturer’s most comparable product in making antidumping calculations.

Second, NAR believes the ITA acted unreasonably in excluding from their calculations tape rolls sold in the home market *939 which were shorter than 50 meters, because this unfairly increased the dumping margin to their disadvantage. Finally, NAR contends that the dumping margin was further increased improperly to their disadvantage by the ITA’s use of indirect selling expenses in the U.S. market to offset commissions paid in the home market.

Discussion

The antidumping' laws of the United States are “directed to foreign products that are sold in the United States at less than fair value.” Asociacion Colombiana de Exportadores de Flores v. United States, 901 F.2d 1089, 1091 (Fed.Cir.1990); Smith-Corona Group v. United States, 713 F.2d 1568 (Fed.Cir.1983), cert. denied, 465 U.S. 1022, 104 S.Ct. 1274, 79 L.Ed.2d 679 (1984). In reaching a determination that sales in the U.S. were at less than fair value, the ITA compares the price of goods ■in the U.S. with their foreign market value.

This Court may review a final anti-dumping determination by the ITA to ascertain whether its findings were made in conformity with the law. An antidump-ing determination will be overturned only if it is not supported by substantial evidence on the record or otherwise not in accordance with law. 19 U.S.C. § 1516a(b)(l)(B) (1988); Gold Star Co. v. United States, 12 CIT -, -, 692 F.Supp. 1382, 1383 (1988), aff'd, 873 F.2d 1427 (Fed.Cir.1989). “Substantial evidence is more than a mere scintilla. It means such relevant evidence as a reasonable mind might accept as adequate to support a conclusion.” Id. at -, 692 F.Supp. at 1383-84; see Consolidated Edison Co. v. NLRB,

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Agro Dutch Industries, Ltd. v. United States
30 Ct. Int'l Trade 320 (Court of International Trade, 2006)
China First Pencil Co. Ltd. v. United States
427 F. Supp. 2d 1236 (Court of International Trade, 2006)
Usinas Siderurgicas de Minas Gerais, S.A. v. United States
22 Ct. Int'l Trade 743 (Court of International Trade, 1998)
Mitsuboshi Belting Ltd. v. United States
21 Ct. Int'l Trade 247 (Court of International Trade, 1997)
CEMEX, S.A. v. United States
20 Ct. Int'l Trade 993 (Court of International Trade, 1996)
Koyo Seiko Co., Ltd. v. United States
932 F. Supp. 1488 (Court of International Trade, 1996)
Nsk Ltd. v. United States
919 F. Supp. 442 (Court of International Trade, 1996)
Sugiyama Chain Co. v. United States
19 Ct. Int'l Trade 328 (Court of International Trade, 1995)
National Steel Corp. v. United States
18 Ct. Int'l Trade 1126 (Court of International Trade, 1994)
Royal Thai Government v. United States
18 Ct. Int'l Trade 277 (Court of International Trade, 1994)
Outokumpu Copper Rolled Products AB v. United States
18 Ct. Int'l Trade 204 (Court of International Trade, 1994)
Mitsui & Co. v. United States
18 Ct. Int'l Trade 185 (Court of International Trade, 1994)
Pulton Chain Co. v. United States
17 Ct. Int'l Trade 1136 (Court of International Trade, 1993)
Hussey Copper, Ltd. v. United States
17 Ct. Int'l Trade 993 (Court of International Trade, 1993)
Saha Thai Steel Pipe Co. v. United States
17 Ct. Int'l Trade 727 (Court of International Trade, 1993)
Krupp Stahl A.G. v. United States
822 F. Supp. 789 (Court of International Trade, 1993)
Mitsubishi Materials Corp. v. United States
820 F. Supp. 608 (Court of International Trade, 1993)
Nippon Pillow Block Sales Co., Ltd. v. United States
820 F. Supp. 1444 (Court of International Trade, 1993)
Camargo Correa Metais, S.A. v. United States
17 Ct. Int'l Trade 35 (Court of International Trade, 1993)
Floral Trade Council of Davis v. United States
16 Ct. Int'l Trade 1014 (Court of International Trade, 1992)

Cite This Page — Counsel Stack

Bluebook (online)
741 F. Supp. 936, 14 Ct. Int'l Trade 409, 14 C.I.T. 409, 1990 Ct. Intl. Trade LEXIS 251, Counsel Stack Legal Research, https://law.counselstack.com/opinion/nar-spa-v-united-states-cit-1990.