Loggerhead Tools, LLC v. Sears Holding Corp.

19 F. Supp. 3d 775, 2013 WL 5951832, 2013 U.S. Dist. LEXIS 159337
CourtDistrict Court, N.D. Illinois
DecidedNovember 6, 2013
DocketCase No. 12-CV-09033
StatusPublished
Cited by11 cases

This text of 19 F. Supp. 3d 775 (Loggerhead Tools, LLC v. Sears Holding Corp.) is published on Counsel Stack Legal Research, covering District Court, N.D. Illinois primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Loggerhead Tools, LLC v. Sears Holding Corp., 19 F. Supp. 3d 775, 2013 WL 5951832, 2013 U.S. Dist. LEXIS 159337 (N.D. Ill. 2013).

Opinion

MEMORANDUM OPINION AND ORDER

JOHN W. DARRAH, United States District Court Judge

Plaintiff LoggerHead Tools, LLC (“LoggerHead”) filed suit against Sears Holding Corporation (“Sears”) on November 9, 2012, alleging eight separate counts against Sears. Sears filed a Motion to Dismiss Counts II, III, and VIII of the Complaint, which stated claims of common law fraud, tortious interference with business relations and prospective advantage, and unjust enrichment, respectively. These three counts were dismissed without prejudice on May 1, 2013, and LoggerHead was given leave to amend its Complaint to replead those three counts, if it could do so consistent with Fed. R. Civ. Pro. 11. (May 1, 2013 Mem. Op. and Order ' at 13.) LoggerHead filed its Amended Complaint on May 31, 2013, alleging twelve separate counts against Sears, four separate counts against newly added Defendant Apex Tool Group, LLC (“Apex”), and one count of civil conspiracy against Sears and Apex jointly.

Sears moves to dismiss Counts XI, XII, XIII, and XVII of the Amended Complaint, and Apex moves separately, pursuant to Federal Rules of Civil Procedure 9(b) and 12(b)(6), to dismiss Counts XV, XVI, and XVII of the Amended Complaint. Apex further moves to strike Paragraphs 75 and 83-89 of LoggerHead’s Amended Complaint pursuant to Federal Rule of Civil Procedure 12(f) for constituting immaterial, impertinent, and scandalous matter. These motions have been fully briefed.

[779]*779BACKGROUND

The following facts are based on LoggerHead’s Amended Complaint and exhibits and are accepted as true for purposes of ruling on a motion to dismiss. See Reger Dev., LLC v. Nat’l City Bank, 592 F.3d 759, 763 (7th Cir.2010).

LoggerHead is a corporation based in Palos Park, Illinois. (Am.ComplJ 1.) Sears is a Delaware corporation based in Hoffman Estates, Illinois. (Id. ¶ 2.) Apex is a Maryland corporation located in Sparks, Maryland. (Id. ¶ 3.) Apex is a supplier of hand tools and power tools and supplies Sears with its Craftsman-branded tools. (Id. ¶ 73.)

Daniel Brown (“Brown”) invented a tool called the Bionic Wrench. (Id. ¶ 9.) Brown was issued two patents by the U.S. Patent and Trademark Office: U.S. Patent No. 6,889,579 and U.S. Patent No. 7,992,470, issued on May 10, 2005, and August 9, 2011, respectively. (Id. ¶¶ 9, 11.) These patents were assigned to LoggerHead, the company founded by Brown. (Id. ¶¶ 9, 11, 13.) The Bionic Wrench is a hand tool that allows “a user to complete work without the wrench slipping off and damaging the bolt.” (Id. ¶ 18.) The Bionic Wrench permits a user to use one tool for many different sizes of nuts and bolts. (Id.) The Bionic Wrench is manufactured in the United States with American-made components. (Id. ¶ 19.) LoggerHead sells the Bionic Wrench on its website and to retailers, including Sears, Canadian Tire, QVC, Costco, Amazon, Ace Hardware, True Value, and Menards. (Id. ¶ 26.) Sears purchased and sold 15,000 Bionic- Wrenches from LoggerHead in 2009, 75,000 in 2010, and over 300,000 in 2011. (Id. ¶¶ 30-31, 35.)

Following three years of growing sales, Sears’s hand-tool buyer, Amanda Campana (“Campana”), informed Brown that Sears wanted to enter into a 2012 supply agreement with LoggerHead for the Bionic Wrench. (Id. ¶ 37.) Campana also indicated that Sears wanted to run a Direct Response TV campaign to promote the Bionic Wrench during Father’s Day and Christmas of 2012. (Id. ¶ 3 8.) Between December 2011 and May 2012, Sears provided LoggerHead oral and written representations that Sears would purchase at least 300,000 Bionic Wrenches in 2012. (Id. ¶ 39.)1 Additionally, Sears’s employees, including Campana, repeatedly told LoggerHead that Sears would enter into a written supply agreement for 2012. (Am. Compl. at 11-12.) For example, on December 21, 2011, Campana sent Brown an email, reconfirming Sears’s forecast of 73,-000 Bionic Wrench units for Father’s Day 2012. (Id. at 12.) Campana moved to another division in Sears and was replaced by Stephanie Kaleta. (Id.) Kaleta also told Brown that Sears was forecasting 73,-000 Bionic Wrenches for Father’s Day 2012, and that Sears would commit to purchasing 300,000 total Bionic Wrench units in 2012. (Id.) On February 10, 2012, Sears began issuing purchase orders for the 73,-000 Bionic Wrenches it agreed to buy for Father’s Day, and LoggerHead worked to fulfill that order. (Id. at 13.) Though a 2012 supply agreement had not been signed, Sears and LoggerHead produced and ran Father’s Day Direct Response TV advertising for the Bionic Wrench. (Id. at 17.) Sales for the Bionic Wrench during the Father’s Day season met or exceeded Sears’s forecasts. (Id. at 16.)

On March 6, 2012, LoggerHead sent Kaleta a draft 2012 Supply Agreement, [780]*780which indicated that Sears would purchase 300,000 units in 2012. (Id. at 13.) The following day, LoggerHead sent a First Agreement Revision to Sears, based on changes requested by Sears. {Id.) A week later, on March 13, 2012, Brown’s son, Dan Brown, Jr., inquired as to the status of the First Agreement Revision to the 2012 Supply Agreement; Kaleta advised Brown she was waiting for the signoff. {Id.) A Second Agreement Revision incorporating additional changes requested by Sears was prepared the following week, on March 19, 2012. {Id. at 14.) In April of 2012, Third and Fourth Agreement Revisions were exchanged between Sears and LoggerHead. (Id.) Throughout these exchanges, Sears asked LoggerHead multiple times if it was selling the Bionic Wrench to its competitors, specifically Home Depot and Lowes; LoggerHead confirmed it was not. {Id. at 16.)

On May 15, 2012, Sears sent LoggerHead a Christmas forecast for 213,519 Bionic Wrench units. (Id. at 15.) Despite the lack of a signed supply agreement, LoggerHead began to take the measures needed to ramp up production to meet Sears’s forecast. (Id.) However, on June 20, 2012, Sears sent LoggerHead a revised Christmas forecast of 2,971 Bionic Wrench units. (Id. ¶ 46.) LoggerHead was surprised by this drastic reduction in the forecast. (Id. ¶ 48.) Sears, in an email from Kaleta, falsely stated that Sears reduced the forecast because of a purported inability to reach agreement regarding the holiday TV ad campaign. (Id. ¶ 49.) Sears’s last communication with LoggerHead regarding the 2012 Bionic Wrench purchases was on July 19, 2012. (Id. ¶ 53.)

In September 2012, Sears introduced its Craftsman “Max Axess Locking Wrench,” which LoggerHead asserts is a virtual copy of the Bionic Wrench. (Id. ¶ 54.) Sears had partnered with Apex to create the Max Axess wrench. (Id. ¶ 55.) LoggerHead asserts that while Sears appeared to be negotiating with LoggerHead regarding its holiday 2012 order of Bionic Wrenches, it secretly partnered with Apex to have a “knockoff’ wrench made in China. (Id. ¶ 57.) Due to this fraudulent omission of information and concealment of Sears’s arrangement with Apex, LoggerHead lost substantial sales and profits. (Id.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
19 F. Supp. 3d 775, 2013 WL 5951832, 2013 U.S. Dist. LEXIS 159337, Counsel Stack Legal Research, https://law.counselstack.com/opinion/loggerhead-tools-llc-v-sears-holding-corp-ilnd-2013.