Judson L. Thomson Mfg. Co. v. Federal Trade Commission

150 F.2d 952, 1945 U.S. App. LEXIS 4453, 1945 Trade Cas. (CCH) 57,399
CourtCourt of Appeals for the First Circuit
DecidedJuly 31, 1945
Docket3986
StatusPublished
Cited by14 cases

This text of 150 F.2d 952 (Judson L. Thomson Mfg. Co. v. Federal Trade Commission) is published on Counsel Stack Legal Research, covering Court of Appeals for the First Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Judson L. Thomson Mfg. Co. v. Federal Trade Commission, 150 F.2d 952, 1945 U.S. App. LEXIS 4453, 1945 Trade Cas. (CCH) 57,399 (1st Cir. 1945).

Opinion

MAHONEY, Circuit Judge.

This is a petition to set aside an order of the Federal Trade Commission charging the Judson L. Thomson Manufacturing Company with violation of § 3 of the Clayton Act, 38 Stat. 731, 15 U.S.C.A. § 14; and directing it to cease and desist from: “Leasing, selling * * * automatic rivet-setting machines on the condition, agreement or understanding that the lessee or purchaser thereof shall not use in or with such machine any rivets other than those acquired from [Thomson] * * *, ” and from enforcing or continuing to enforce such conditions or agreements already made. The Commission has filed a cross-petition asking for enforcement of the order. 1

The facts as found by the Commission may be summarized as follows :

The petitioner is engaged in the business of manufacturing and selling tubular and bifurcated rivets, and in manufacturing, leasing and servicing automatic rivet-setting machines for the setting of such rivets. Its business is interstate in character and it is in competition with numerous other companies. Tubular and bifurcated rivets are sold to two classes of customers — in the industrial field where manufacturers use them in the assembling of their products, and in the carton or jobbing trade where they are sold through mail-order houses and hardware jobbers for replacement and repair purposes. Automatic feed-setting machines are usually used in the industrial field to set rivets. In the carton or jobbing trade, however, such machines are not used. There some rivets are set in small hand feed machines and some in special brake lining machines. In the United States there are eight companies engaged in selling tubular and bifurcated rivets and in supplying automatic machines with which to set them. At the time the complaint in this proceeding was filed each of the eight companies was leasing machines on the condition that its lessees would not use such machines for setting any rivets other than those manufactured and supplied by the lessor.

The use of tubular and bifurcated rivets for industrial purposes began about 1889. Until 1914 the petitioner and the Tubular Rivet and Stud Company were the only companies engaged both in selling such rivets and supplying machines for setting them. It has been the practice with both companies to lease machines and not to sell them. At the present time the petitioner and Tubular have approximately 8,000 and 7,000 machines respectively outstanding on lease. The Penn Rivet Corporation, which entered the field about 1914, has approximately 500 machines outstanding on lease and has sold in excess of 2,000 machines. The Edwin B. Stimpson Company started manufacturing machines about 1922 and has approximately 2,000 machines" on lease and has sold approximately 300. The Chi *954 cago Rivet and Machine Company started supplying machines between 1924 and 1928. It has between 800 and 1000 machines outstanding on lease and has sold in excess of 3.000. The remaining three companies which entered the field between 1927 and 1930 have approximately 300 machines outstanding on lease and have sold some 600 machines. All together the six companies have approximately 19,000 machines outstanding on leases. Substantially all of them are “tied” machines, 2 that is, machines in which the lessee may only use rivets supplied by his lessor. The companies have sold approximately 6,000 machines since they have been in business. The petitioner as lessor of some 8,000 machines controls approximately 42% of the leased machines, or 32% o"f all machines in the industrial field. In 1939 the total volume of business done by the eight companies was about $5,180,000. Of this amount the petitioner and Tubular each accounted for apr proximately 25%; Chicago accounted for approximately 20%; and the remaining five companies accounted for 30 %

The petitioner confines its sales of rivets to the industrial field and does not sell to the carton or jobbing trade. To increase the sale of rivets its practice has been to supply machines for use in setting them. These machines which it does not sell are leased at a yearly rental of from $15 to $25 for the average size machine. These leases may be cancelled on ten days notice by either party. If the lessee uses a certain number of rivets — usually from 150,000 to 300.000, dependent on the type of the machine — the rental is rebated. The petitioner does not charge for servicing its machines, or, with the exception of disappearing-point anvils which wear out rapidly, for replacing parts. The prices for rivets charged by the petitioner run about 10% higher than the prices of similar rivets on the open market.

The Commission found that the primary ; purpose of leasing machines is to enable ] the petitioner to sell tubular and bifurcated ¡ rivets with such machines. It further found j that there was on the open market an ample supply of rivets for use in the petitioner’s machines sold both by companies which j supply machines and which do not supply machines. Such concerns are precluded| from selling to the petitioner’s lessees by reason of the restrictive provisions in its ■' leases. The Commission acknowledged the fact that the petitioner manufactures rivets of various sizes and shapes, many of them specially designed for special machines, but found that any competent rivet manufacturer could duplicate and supply such rivets. It referred to five concerns which manufacture rivets but do not supply machines. The gross sales of these concerns was some $475,000 in 1939 and were more or less confined to the hardware and jobbing trade in which rivet-setting machines are not used. By reason of the restrictive leíase they are precluded from making much headway in the industrial field.

Therefore the Commission found that the practice of the petitioner “in requiring that the lessees of its rivet-setting machines use in or with such machines no tubular or bifurcated rivets other than those supplied by the [petitioner], results in the exclusion from the market of numerous parties who, in' the absence of such restrictions, would be prospective and potential purchasers of tubular and bifurcated rivets from [petitioner’s] competitors. Competition in the tubular- and bifurcated- rivet market is restricted and contracted in direct proportion to the extent to which [petitioner] is successful in leasing its rivet-setting machines under agreements containing such restrictive conditions * * *[Further] “The Commission * * * finds that the effect of such restrictive conditions under the circumstances set forth herein has been, is, and may be to substantially lessen competition in the sale of tubular and bifurcated rivets.”

As it applies in this proceeding, § 3 of the Clayton Act prohibits leasing machines on the condition, agreement or understanding that the lessee shall not use rivets of competitors, if competition in the sale of rivbts may be substantially lessened thereby. Two questions are presented: (1) does the petitioner’s tying clause prohibit the use of a competitor’s rivets within the meaning of § 3; and (2) has the use of the tying clause substantially lessened competition? If the Commission’s order is to be enforced both questions must be answered in the affirmative.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

New Amsterdam Cheese Corp. v. KRAFTCO CORPORATION
363 F. Supp. 135 (S.D. New York, 1973)
S. Kriete Osborn v. Sinclair Refining Company
286 F.2d 832 (Fourth Circuit, 1961)
McElhenney Co. v. Western Auto Supply Company
167 F. Supp. 949 (W.D. South Carolina, 1958)
Tampa Electric Co. v. Nashville Coal Co.
168 F. Supp. 456 (M.D. Tennessee, 1958)
Nelligan v. Ford Motor Company
161 F. Supp. 738 (W.D. South Carolina, 1958)
Times-Picayune Publishing Co. v. United States
345 U.S. 594 (Supreme Court, 1953)
Moore v. Mead Service Co.
184 F.2d 338 (Tenth Circuit, 1950)
United States v. Standard Oil Co.
78 F. Supp. 850 (S.D. California, 1948)
United States v. International Salt Co.
6 F.R.D. 302 (S.D. New York, 1946)

Cite This Page — Counsel Stack

Bluebook (online)
150 F.2d 952, 1945 U.S. App. LEXIS 4453, 1945 Trade Cas. (CCH) 57,399, Counsel Stack Legal Research, https://law.counselstack.com/opinion/judson-l-thomson-mfg-co-v-federal-trade-commission-ca1-1945.