Joseph Schenfeld v. Norton Company

391 F.2d 420
CourtCourt of Appeals for the Tenth Circuit
DecidedJuly 2, 1968
Docket9386_1
StatusPublished
Cited by28 cases

This text of 391 F.2d 420 (Joseph Schenfeld v. Norton Company) is published on Counsel Stack Legal Research, covering Court of Appeals for the Tenth Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Joseph Schenfeld v. Norton Company, 391 F.2d 420 (10th Cir. 1968).

Opinion

MURRAH, Chief Judge.

Appellant Joseph Schenfeld was injured in the course of his employment with Western Foundries, Inc., when a grinding wheel he was using flew into pieces, one or more of which struck him in the face. The wheel was mounted on a power grinder by means of a metal mount. Schenfeld brought suit against appellee Norton Company (the manufacturer and supplier of both the grinding wheel and metal mount), alleging: (1) breach of an implied warranty that the grinding wheel was in all respects fit> proper and safe to be .used when mounted in the manner in which it was, and (2) negligence. At the close of the evidence the trial judge sustained Norton’s motion to dismiss the implied warranty claim. He found that the metal mount was not sold by Norton to Schenfeld’s employer, and concluded that in the absence of a “sale”, there could be no implied warranty. The case was submitted to the jury on the negligence count, the court instructing on both negligence and contributory negligence. Judgment was entered on the jury verdict in favor of Norton. On appeal, Schenfeld contends that the trial judge erred in: (1) instructing the jury on contributory negligence, and (2) dismissing the implied warranty claim.

The record discloses the following pertinent facts. Norton manufactures and markets approximately 250,000 varieties of grinding wheels. The type being used by Schenfeld at the time of the accident was a so-called “raised hub” grinding wheel, designed to perform a particular grinding operation. Norton markets, as a separate item, a fiber mount to be used for mounting raised hub wheels. For some time prior to the accident Western Foundries’ Foreman Grieve had purchased hub grinding wheels and fiber mounts from Danielson, Norton’s salesman who made monthly visits to the foundry. Grieve became dissatisfied with the fiber mounts because they wore down too ' quickly and, about a month before Schenfeld’s injury, asked Danielson if there was a metal mount that could be used in place of the fiber one. Danielson replied that although Norton did not make a metal mount for sale as a separate item, it did market, as a complete unit, a metal mount and grinding wheel attached together by means of a cement adhesive. This unit was called a “dis-card mount wheel” or a “throw-away mount.wheel” because the mount was discarded along with the wheel when the wheel was worn out. Danielson said he would get Grieve one or two of these metal dis-card mounts which, after removal from the attached grinding wheels, could be used in place of the fiber mounts. A few days later Danielson brought two of the throw-away mounts to Western Foundries and told Grieve “to give these a try and see if they would work.” 1

On the morning of the accident, Grieve personally mounted a hub wheel (admittedly manufactured and marketed by Norton) on a portable grinder by means of one of the supplied metal mounts. He subsequently assigned the grinder to Schenfeld to remove rough places from a cast iron irrigation gate. Schenfeld testified that after checking the grinding wheel for chips, he started the grinder and had “barely touched” the gate with the grinding wheel when the accident occurred.

The trial of the case was essentially a battle of experts. In support of his negligence and breach of warranty counts, Schenfeld presented expert testimony to the effect that there was a mismatch between the metal mount supplied by Danielson and the grinding wheel; *422 that this mis-match created a gap between the mount and the wheel; and that when the two were placed on the grinder and tightened, a stress was created in the grinding wheel, causing it to break and injure Schenfeld. This conclusion as to the cause of the accident was refuted by two expert witnesses called by Norton. Based upon their examination of the wheel fragments, they concluded that the grinding wheel broke as the result of being “jammed” by the operator, i. e. banged suddenly into the work piece.

At the close of the evidence, the trial judge, over objection by Schenfeld’s counsel, instructed the jury to return a verdict for Norton if the jury found that Schenfeld was guilty of contributory negligence. On appeal, Schenfeld argues that the expert testimony to the effect that the accident was caused by jamming on the part of Schenfeld was merely “surmise, speculation and conjecture”, and did not form a sufficient basis upon which to predicate an instruction on contributory negligence. On the contrary, we think the instruction was proper.

It is true of course that contributory negligence, like primary negligence, must be based upon something more than speculation or surmise, but negligence, either primary or contributory, may be established by reasonable inferences drawn from the facts and circumstances surrounding the accident. See Martin K. Eby Construction Co. v. Neely, 10 Cir., 344 F.2d 482; McCready v. United Iron and Steel Co., 10 Cir., 272 F.2d 700; and Remley v. Newton, 147 Colo. 401, 364 P.2d 581. Norton’s experts examined the wheel fragments as they existed immediately following the accident, and listened to Schenfeld’s description of the manner in which he was holding the grinder when the accident occurred. From the information thus gathered; they concluded that the accident resulted from “jamming” on the part of the operator. We think the opinion they formed and expressed was permissible under the facts and circumstances, and warranted an instruction on contributory negligence.

Before considering the propriety of the trial judge’s dismissal of Schenfeld’s implied warranty claim, it seems appropriate to quickly review the development and present status of the various potential recovery routes open to a claimant injured by a defective product. One such avenue of redress is, of course, an action for negligence. Since MacPherson v. Buick Motor Co., 217 N.Y. 382, 111 N.E. 1050, it is no longer doubted that the supplier of a chattel negligently made is liable for foreseeable harm to anyone injured, regardless of privity. See Prosser, The Assault Upon the Citadel (Strict Liability to the Consumer), 69 Yale L.J. 1099, 1100-1103 (1960).

Independently of the negligence route, recovery has been traditionally allowed for breach of an express or implied warranty. Such a warranty was considered to be a part of the contract between the seller and buyer and thus had its basis in contract law. See Dagley v. Armstrong Rubber Co., 7 Cir., 344 F.2d 245. With the advent of the Uniform Sales Act, now replaced in the vast majority of states by the Uniform Commercial Code, recovery became conditioned upon compliance with its pertinent warranty provisions. USA §§ 12 and 15. Recovery was often precluded, however, by the assertion of certain recognized contractual defenses such as lack of privity or the existence of a disclaimer. See Annot., 75 A.L.R.2d 39, 47-54. In response to a felt need, many courts circumvented these defenses by using theories of fictitious agency or third party beneficiary. 2

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Best v. United States
505 F. Supp. 48 (E.D. North Carolina, 1980)
Leo Sheep Company v. United States of America
570 F.2d 881 (Tenth Circuit, 1978)
SEATTLE-FIRST NAT'L v. Volkswagen
525 P.2d 286 (Court of Appeals of Washington, 1974)
W. Leroy Rampey v. Walt Allen
501 F.2d 1090 (Tenth Circuit, 1974)
Seattle-First National Bank v. Volkswagen of America, Inc.
525 P.2d 286 (Court of Appeals of Washington, 1974)
Jerry v. Borden Co.
45 A.D.2d 344 (Appellate Division of the Supreme Court of New York, 1974)
Kirkland v. General Motors Corporation
1974 OK 52 (Supreme Court of Oklahoma, 1974)
Caskey v. Olympic Radio and Television
343 F. Supp. 969 (D. South Carolina, 1972)
Weber v. Fidelity & Casualty Insurance Co. of NY
250 So. 2d 754 (Supreme Court of Louisiana, 1971)
Berg v. Stromme
484 P.2d 380 (Washington Supreme Court, 1971)

Cite This Page — Counsel Stack

Bluebook (online)
391 F.2d 420, Counsel Stack Legal Research, https://law.counselstack.com/opinion/joseph-schenfeld-v-norton-company-ca10-1968.