Hangzhou Ailong Metal Prods. Co. v. United States

2023 CIT 50
CourtUnited States Court of International Trade
DecidedApril 11, 2023
Docket22-00116
StatusPublished

This text of 2023 CIT 50 (Hangzhou Ailong Metal Prods. Co. v. United States) is published on Counsel Stack Legal Research, covering United States Court of International Trade primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Hangzhou Ailong Metal Prods. Co. v. United States, 2023 CIT 50 (cit 2023).

Opinion

Slip Op. 23-

UNITED STATES COURT OF INTERNATIONAL TRADE

HANGZHOU AILONG METAL PRODUCTS CO., LTD.,

Plaintiff,

v.

UNITED STATES, Before: Mark A. Barnett, Chief Judge Court No. 22-00116 Defendant,

and

NUCOR TUBULAR PRODUCTS INC.,

Defendant-Intervenor.

OPINION

[Sustaining Commerce’s final results in the 2019–2020 administrative review of the antidumping duty order on light-walled rectangular pipe and tube from the People’s Republic of China.]

Dated: April 11, 2023

Daniel J. Cannistra and Pierce J. Lee, Crowell & Moring LLP, of Washington, DC, for Plaintiff Hangzhou Ailong Metal Products Co., Ltd.

Kristin E. Olson, Trial Attorney, Commercial Litigation Branch, Civil Division, U.S. Department of Justice, of Washington, DC, for Defendant United States. With her on the brief were Brian M. Boynton, Principal Deputy Assistant Attorney General, Patricia M. McCarthy, Director, and Franklin E. White, Jr., Assistant Director. Of counsel on the brief was Ashlande Gelin, Attorney, Office of the Chief Counsel for Trade Enforcement and Compliance, U.S. Department of Commerce, of Washington, DC.

Alan H. Price, Robert E. DeFrancesco, III, Maureen E. Thorson, and Nicole C. Hager, Wiley Rein LLP, of Washington, DC, for Defendant-Intervenor Nucor Tubular Products Inc. Court No. 22-00116 Page 2

Barnett, Chief Judge: This matter is before the court following the U.S.

Department of Commerce’s (“Commerce” or “the agency”) final results in the 2019–

2020 administrative review of the antidumping duty order on light-walled rectangular

pipe and tube (“LWRPT”) from the People’s Republic of China (“China”) for the period of

review August 1, 2019, through July 31, 2020. See Light-Walled Rectangular Pipe and

Tube From the People’s Republic of China, 87 Fed. Reg. 13,968 (Dep’t Commerce Mar.

11, 2022) (final results of antidumping duty admin. review; 2019–2020) (“Final Results”),

ECF No. 21-1, and accompanying Issues and Decision Mem., A-570-914 (Mar. 7, 2022)

(“I&D Mem.”), ECF No. 21-2.1

Plaintiff Hangzhou Ailong Metal Products Co., Ltd. (“Plaintiff”) raises several

challenges regarding Commerce’s surrogate value selection for raw square tube. See

Confid. Pl.’s Mem. in Supp. of Rule 56.2 Mot. for J. on the Agency R. (“Pl.’s Mem.”),

ECF No. 25-1; Confid. Pl.’s Reply Mem. in Supp. of Rule 56.2 Mot. for J. on the Agency

R. (“Pl.’s Reply”), ECF No. 39.

Defendant United States (“the Government”) and Defendant-Intervenor Nucor

Tubular Products Inc. (“Nucor”) filed response briefs in support of Commerce’s

determinations regarding each contested issue. See Def.’s Mem. in Opp’n to Pl.’s Rule

1The administrative record filed in connection with the Final Results is divided into a Public Administrative Record (“PR”), ECF No. 21-4, and a Confidential Administrative Record (“CR”), ECF No. 21-5. Parties filed joint appendices containing record documents cited in their briefs. See Public J.A., ECF No. 42-1; Confid. J.A. (“CJA”), ECF Nos. 42-1 through 42-4. Citations are to the CJA unless stated otherwise. Court No. 22-00116 Page 3

56.2 Mot. for J. Upon the Agency R. (“Def.’s Mem.”), ECF No. 38; Confid. Resp. to Mot.

for J. on the Agency R. (“Nucor’s Mem.”), ECF No. 33.

For the following reasons, the court sustains Commerce’s Final Results.

BACKGROUND

On October 6, 2020, Commerce initiated the 2019–2020 administrative review of

the antidumping duty order on LWRPT from China at Plaintiff’s request. See Initiation of

Antidumping and Countervailing Duty Admin. Reviews, 85 Fed. Reg. 63,081, 63,092

(Dep’t Commerce Oct. 6, 2020); Req. for Admin. Review (Aug. 20, 2020), at 1, PR 1,

CJA Tab 8. On October 22, 2020, Commerce issued an initial questionnaire to Plaintiff.

See Req. for Info. (Oct. 22, 2020), PR 9, CJA Tab 9.

Pertinent to the matter before the court, the initial questionnaire requested that

Plaintiff identify the raw materials that it used to produce the merchandise in question.

See id. at D-1. In response, Plaintiff identified that the subject merchandise it produced

had only one raw material—raw square tube. See Section D Quest. Resp. (Dec. 7,

2020) (“SDQR”) at 18, PR 24, CR 11–15, CJA Tab 12. Commerce then issued a

supplemental questionnaire requesting Plaintiff to clarify whether its reported factor of

production—the raw square tube—was within the scope of the antidumping duty order

on LWRPT that Plaintiff’s exported merchandise was subject to. See Resp. to Section

D. Suppl. Quest. (Mar. 30, 2021) (“Suppl. SDQR”) at 7, PR 39, CR 23, CJA Tab 19.

Plaintiff responded that the raw square tubes met the description of products within the

scope of the antidumping order on LWRPT. Id. at 7–8. Plaintiff went on to explain that

the raw square tubes were “intermediate inputs” and were subject to “significant further Court No. 22-00116 Page 4

processing,” such that the value of the exported subject merchandise substantially

exceeded the price of the raw material input, and requested that Commerce calculate

normal value based on its usage of this intermediate input. Id. at 8.

Commerce issued further supplemental questions requesting Plaintiff to identify

the factors of production used to produce the raw square tube inputs and provide the

consumption quantity for each. See Resp. to Section C&D Suppl. Quest. (Apr. 27,

2021) (“Second Suppl. SDQR”) at 13, PR 60, CR 27–30, CJA Tab 26. Plaintiff identified

hot-rolled carbon steel plates as the factor of production used to make the raw square

tubes and provided databases that reported the consumption rate of hot-rolled carbon

steel plates to produce one metric ton of the final subject merchandise. See id. at 13–

14, Ex. D-26.

Because China is considered a non-market economy country for purposes of the

antidumping duty law, Commerce requested comments on the selection of a primary

surrogate country from which to value the factors of production. Req. for Econ. Dev.,

Surrogate Country, and Surrogate Value Cmts. and Info. (Mar. 18, 2021), PR 34, CJA

Tab 15. Nucor urged Commerce to select either Malaysia or Brazil as the primary

surrogate country and submitted Malaysian import data to value raw square tube.

Cmts. on Surrogate Country Selection (Mar. 29, 2021) at 2–4, PR 38, CJA Tab 18;

Submission of Surrogate Values (Apr. 5, 2021) at 2, Ex. 1, PR 47, CR 24–25, CJA Tab

21. Plaintiff did not initially advocate for any particular primary surrogate country, but

provided Commerce with certain Romanian surrogate value data, including import data

for raw square tube. See Submission of Surrogate Values (Apr. 5, 2021) at 1, Ex. SV-1, Court No. 22-00116 Page 5

PR 40–46, CJA Tab 20. Following Commerce’s request that Plaintiff identify the factors

of production for the raw square tube, Plaintiff submitted Russian surrogate value data

for hot-rolled carbon steel plate obtained from Datamyne’s Global Trade Analytics

(“Datamyne”) and urged Commerce to select Russia as the primary surrogate country.

See 2nd Submission of Surrogate Values (Aug. 2, 2021) at 1, Ex. SV-12, PR 63–69,

CJA Tab 27.

Nucor submitted rebuttal information regarding surrogate values and comments

purporting to show the unreliability of the Russian surrogate value data. See Rebuttal

Surrogate Value Info. (Aug. 12, 2021), PR 83, CJA Tab 30; Cmts. in Advance of the

Dep’t’s Prelim. Results. (Aug. 6, 2021), PR 82, CR 31, CJA Tab 29. Specifically, Nucor

Free access — add to your briefcase to read the full text and ask questions with AI

Related

NMB Singapore Ltd. v. United States
557 F.3d 1316 (Federal Circuit, 2009)
Qvd Food Co., Ltd. v. United States
658 F.3d 1318 (Federal Circuit, 2011)
Zhengzhou Harmoni Spice Co., Ltd. v. United States
617 F. Supp. 2d 1281 (Court of International Trade, 2009)
Hangzhou Spring Washer Co., Ltd. v. United States
387 F. Supp. 2d 1236 (Court of International Trade, 2005)
Globe Metallurgical, Inc. v. United States
350 F. Supp. 2d 1148 (Court of International Trade, 2004)
Olympia Industrial, Inc. v. United States
7 F. Supp. 2d 997 (Court of International Trade, 1998)
Qingdao Sea-Line Trading Co. v. United States
766 F.3d 1378 (Federal Circuit, 2014)
Jiaxing Brother Fastener Co. v. United States
11 F. Supp. 3d 1326 (Court of International Trade, 2014)
Jiaxing Brother Fastener Co. v. United States
822 F.3d 1289 (Federal Circuit, 2016)
United Steel & Fasteners, Inc. v. United States
469 F. Supp. 3d 1390 (Court of International Trade, 2020)

Cite This Page — Counsel Stack

Bluebook (online)
2023 CIT 50, Counsel Stack Legal Research, https://law.counselstack.com/opinion/hangzhou-ailong-metal-prods-co-v-united-states-cit-2023.