Deck House, Inc. v. New Jersey State Board of Architects

531 F. Supp. 633, 1982 U.S. Dist. LEXIS 10633
CourtDistrict Court, D. New Jersey
DecidedFebruary 3, 1982
DocketCiv. A. 81-3861
StatusPublished
Cited by2 cases

This text of 531 F. Supp. 633 (Deck House, Inc. v. New Jersey State Board of Architects) is published on Counsel Stack Legal Research, covering District Court, D. New Jersey primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Deck House, Inc. v. New Jersey State Board of Architects, 531 F. Supp. 633, 1982 U.S. Dist. LEXIS 10633 (D.N.J. 1982).

Opinion

OPINION

DEBEVOISE, District Judge.

The matter is before the Court upon plaintiffs’ application for a preliminary in *634 junction and defendants’ motion to dismiss the complaint for failure to state a cause of action.

Plaintiff Deck House, Inc., a Massachusetts corporation having its principal place of business in that state, is a manufacturer of prefabricated housing. Plaintiff Martin A. Laibow, a Pennsylvania citizen, is an architect registered and licensed to practice in New Jersey. He has certified plans of prefabricated houses which Deck House has sold to New Jersey residents for construction in New Jersey.

The defendants are the New Jersey Board of Architects, James Zazzali, Attorney General of New Jersey, and Adam K. Levin, Director of the Division of Consumer Affairs of New Jersey.

Defendants have taken the position that plaintiffs, by selling prefabricated buildings utilizing such plans and by certifying such plans which were not originally prepared by New Jersey architects, have violated N.J.S.A. 45:3-10. That statute forbids the practice of architecture in New Jersey without a certificate issued by the Board of Architects. In essence, plaintiffs’ action seeks to prevent application of N.J.S.A. 45:3-10 to them.

The Facts

There is little, if any, dispute about the facts.

A. The Prefabricated House Industry: Deck House is one of more than 1500 producers of prefabricated, or manufactured, housing and housing components in the United States. A prefabricated house is one in which the materials are specified, manufactured, and often assembled under one roof. Included in this category are pre-cut, panelized, log and shell houses, geodesic domes, metal buildings, and modular/sectional houses. Additionally, many “conventionally built” houses are constructed with factory-made roof trusses and/or floor trusses, wall panels, floor panels, prehung windows, pre-hung exterior and interior doors, factory-made cabinetry and prejobbed plumbing systems, heating systems, kitchens or baths. The average selling price of a dwelling manufactured by Deck House is $57,000, to which must be added the cost of land, the charges of the building contractor, and the costs of all the elements of the house which are not included in the unit Deck House sells.

Most manufactured houses are sold in the form of a package including plans, which can be tailored to a customer’s personal needs, and materials, which are pre-cut and/or assembled in accordance with the plans. The actual structure is then erected on the site by the owner himself or, more commonly, by a local builder.

According to statistics published in the 1981 Red Book of Housing Manufacturers, a research report on the industrialized housing industry, in 1980, a poor year for the housing industry, approximately 155,000 manufactured units were erected in the United States, nearly 1,000 of them in New Jersey. In 1980, 510 factory-built housing units were produced by manufacturers located in New Jersey.

The major types of manufactured homes are modular/sectional homes, pre-cut homes and panelized homes. A modular/sectional home is generally described as a three-dimensional housing unit produced in a plant and designed for erection on a permanent foundation with a minimum of on-site labor. Most are made for shipment to the site in two or more sections. A pre-cut house is a manufactured house package for which the many parts are pre-cut but not pre-assembled. A panelized house differs in that it is partially assembled in the factory, then shipped as a package to the site where assembly is completed on the foundation. It includes wall panels and may include other items such as roof systems, floor systems, plus a wide variety of building materials and equipment. Deck House produces panelized homes. The Deck House received by the purchaser includes the exterior shell, the interior wood trim, doors, baseboard, bookcases and cabinets. It does not include sheet rock, electricity, plumbing, heat, painting, floor covering, foundations (which generally are installed before deliv *635 ery of the Deck House components), landscaping, masonry for the fireplace, the floor slab, and appliances. These non-included items are generally provided or subcontracted for by the building contractor whom the purchaser retains to erect the house.

More than 4,000 Deck Houses have been built throughout the country, and nearly 150 have been built in New Jersey since the company’s inception in 1960, mostly in the less developed areas of the state. Five or six Deck Houses are now under contract awaiting shipment to New Jersey purchasers.

Typically, a Deck House sale is effected as follows: the prospective customer and a Deck House representative visit the proposed home site and discuss the customer’s requirements. If the customer is interested in proceeding, he signs a pre-contract service agreement. The pre-contract service agreement authorizes the company, for a service fee, to prepare sketches and/or drawings for a Deck House. There are three types of pre-contract service agreements, depending on the degree to which a standard Deck House plan (of which there are more than fifty) must be modified, and the company’s service fee varies accordingly-

If the customer selects an existing plan and makes minor modifications, pre-contract service agreement No. 1 will be used, calling for a non-refundable service fee of $700.

If the customer takes an existing plan and makes major modifications, pre-contract service agreement No. 2 will be used, calling for a $1,000 service fee. If the customer’s requirements are nothing like an existing plan and Deck House must essentially start from scratch, pre-contract service agreement No. 3 will be used, providing for a service fee of $2,000. Under both No. 2 and No. 3, if the sketches are not approved by the customer, a portion of the service fee is refunded. Under all three agreements, if the customer elects to proceed with construction, the service fee is applied against the cost of the component package.

In a typical case sketches are made by employees in Deck House’s design department, located at the company’s headquarters in Acton, Massachusetts. They are not architects certified by the New Jersey Board of Architects and, in fact, at the present time are not architects at all. When the customer approves the sketches, detailed scaled drawings are prepared. This function, too, is not performed by architects certified by the Board of Architects of New Jersey. When all modifications requested by the customer have been completed, and if the state in which the house is to be erected so requires, the final drawings are sent to a licensed architect of the state for review and approval.

New Jersey does require that a licensed architect sign and seal the drawings before a building permit can issue. Deck House has retained Laibow, a registered New Jersey architect, for this purpose. Laibow may approve these drawings as prepared or, if necessary, require that further modifications be made. For example, Laibow has returned drawings to the company for redrafting to conform with the requirements of the Small Dwelling Energy Subcode, N.J. A.C. 5:23-3.8(a)(3).

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Catlin v. Board of Registration of Architects
604 N.E.2d 1301 (Massachusetts Supreme Judicial Court, 1992)
Cox Cable Communications, Inc. v. Simpson
569 F. Supp. 507 (D. Nebraska, 1983)

Cite This Page — Counsel Stack

Bluebook (online)
531 F. Supp. 633, 1982 U.S. Dist. LEXIS 10633, Counsel Stack Legal Research, https://law.counselstack.com/opinion/deck-house-inc-v-new-jersey-state-board-of-architects-njd-1982.