Berhad v. Advanced Polymer Coatings, Inc.

652 F. App'x 316
CourtCourt of Appeals for the Sixth Circuit
DecidedJune 14, 2016
Docket15-3568
StatusUnpublished
Cited by2 cases

This text of 652 F. App'x 316 (Berhad v. Advanced Polymer Coatings, Inc.) is published on Counsel Stack Legal Research, covering Court of Appeals for the Sixth Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Berhad v. Advanced Polymer Coatings, Inc., 652 F. App'x 316 (6th Cir. 2016).

Opinion

*318 HOOD, District Judge.

I.

This case involves a dispute over the delamination of the protective coating of ocean-going chemical tankers. Plaintiff-Appellant, MISC Berhad (“MISC”), is an international shipping corporation that contracted with a shipyard to build chemical tanker ships and cargo tanks. The shipyard hired Defendant-Appellee, Advanced Polymer Coatings, Inc. (“APC”), as a subcontractor to supply and apply an epoxy protective coating called “MarineLine” to the tankers and cargo tanks. The Marine-Line coating delaminated on several of MISC’s tanks, which resulted in a dispute as to who was responsible for repairing the tanks and bearing the cost of the repairs. MISC appeals from the summary judgment entered in favor of APC as to MISC’s claims for breach of express warranty as to the Insurance Guarantees, breach of express warranty as to the Certificate of Completion, and negligent misrepresentation. For the reasons that follow, we affirm the decision of the district court.

II.

MISC is an international shipping company based in Malaysia that owns and operates chemical tankers. [DE 44-2, ¶ 6, Page ID 891]. In late 2006 or early 2007, MISC entered into a shipbuilding contract with a shipyard, SLS Shipbuilding Co., Ltd. (“SLS”), for the construction and sale of several ocean-going chemical tanker vessels, 1 including the Bunga Bakawali (“Bakawali”) and the Bunga Balsam (“Balsam”) (the “SLS/MISC Contract”). Id. at ¶ 8; DE 44-2, ¶8; Page ID 891. The Bakawali and Balsam tankers transport oils and liquid chemicals in shipboard cargo tanks around the world. [DE 44-2, ¶ 9; Page ID 891], Ocean-going tankers such as the Bakawali and Balsam are subject to the International Code for the Construction and Equipment of Ships Carrying Dangerous Chemicals in Bulk (“IBC Code”), which requires, that chemical tankers be coated in protective material that can shield the steel substrate of cargo tanks from corrosion caused by chemicals transported in the vessels. [DE 40-11, ¶¶ 15-17; Page ID 655-56].

APC developed a product called “Ma-rineLine,” which is an approved and patented protective coating for chemical tankers. [DE 40-11, ¶¶ 17-18, Page ID 656; DE 40-14, ¶¶ 8-16, Page ID 689]. To assure that tanker operators can observe any corrosion of the coating before the transported chemicals begin to corrode the steel substrate of the cargo tanks, APC developed a two-layer application process in which the base coat is painted red and the top coat gray. [DE 40-14, ¶ 10-11, Page ID 689]. If MarineLine is chemically attacked, the top coat dissolves, exposing the red base coat. Id. APC manufactures and sells its MarineLine product to shipyards that build or renovate chemical tankers. Id, at ¶ 16, Page ID 689.

APC marketed MarineLine to MISC, and MISC chose MarineLine based on APC’s representations that MarineLine was superior to other coating products and resistant to a broad spectrum of cargoes, including the liquid cargoes that MISC’s vessels would carry. [DE 44-2, ¶ 14-16; Page ID 892]. At the direction of MISC, on August 18, 2009, SLS entered into a contract with APC to coat a number of tankers with MarineLine, including the Baka- *319 wali and Balsam tankers (hereinafter the “SLS/APC Contract”). [DE 44-2, ¶17, Page ID 892; DE 40-12, Page ID 659-70]. Pursuant to the SLS/APC Contract, SLS was responsible for providing the surface preparation for the work and maintaining the environment for application of the coating. Id. This included providing the specified dehumidification and heating equipment and maintaining the temperature of the area in which the coating was applied. Id. APC, on the other hand, was responsible for supplying and applying MarineLine, which included heat curing the coating. [DE 40-12, Page ID 659-70]. APC was also responsible for inspection and testing services during each part of the application process to ensure that the coating was properly applied, while SLS and MISC were required to have a representative present during the inspections. Id. at ¶ 2(3), Page ID 663; ¶19, Page ID 669. APC’s inspectors were instructed to write up any deviations from APC specifications in a corrective-action report and obtain a signature of the party responsible for meeting the specification. [DE 40-2 ¶24, Page ID 630]. Upon a satisfactory inspection at completion of the work, SLS was to provide a Certificate of Completion to APC. Id.

Coating of the Bakawali commenced during December of 2009 and continued through January of 2010. [DE 40-2 ¶ 27, Page ID 631]. During the application process, the APC inspector observed that SLS was not meeting the standard heating procedures for MarineLine application in the Bakawali, which led to four corrective-action reports being prepared by APC. Id. at ¶¶ 29-32. The reports, dated January 8, 9, 10, and 12, 2010, detail the observations of the inspector (carbon soot on various portions of the tanks), the non-conformance (improper heating equipment), the corrective action (a list of the type of proper heating equipment to be used in the future), and a disclaimer of any damages caused by SLS’s non-conformance. [DE 40-5-8, Page ID 642-646]. Each corrective-action report was signed by SLS and MISC. Id. The Bakawali tanks were heat cured during the last week of January of 2010 with final testing and inspection occurring thereafter. [DE 40-2, ¶¶ 33-35, Page ID 631]. On February 1, 2010, APC issued an Insurance Guarantee to SLS for the Bakawali. [DE 40-2, ¶ 35, Page ID 631; 44-2, Page ID 904-910]. The Bakawali Insurance Guarantee included an addendum that excluded the tanks that were subject to the January 8, 9, 10, and 12, 2010 corrective-action reports. Id. On March 7, 2010, SLS issued a Completion Certificate for the Bakawali, certifying that the tanks had been coated and cured with Marine-Line coating per APC’s specifications and were ready for service, which was signed by APC, MISC, and SLS. [DE 40-2, ¶34, Page ID 631; 44-2, Page ID 902], On or about October 5, 2010, SLS assigned the Bakawali Insurance Guarantee to MISC. [DE 40-2, ¶ 42; Page ID 632].

On June 4, 2010, following the Bakawa-li’s first voyage, during which it was carrying vegetable oil, MISC discovered dela-mination defects, discoloration, and other indications of failure of MarineLine in the cargo tanks of the Bakawali. [DE 44-2, 1130-31, Page ID 893; DE 46-1, Page ID 1013]. On June 6, 2010, MISC notified SLS and APC of the problem. [DE 44-2, ¶ 31; Page ID 893]. Delamination, which describes the condition where the top coat fails to bond to the base coat, can result from a number of factors that interfere with the bond between the top and bottom coat. [DE 40-11, ¶¶ 37-38; Page ID 658]. One recognized factor that can lead to delamination is the formation of carba-mates on the base coat before the second coat is applied. Id. A laboratory analysis of coating chips from the Bakawali’s dela- *320 minating tanks revealed the presence of carbamates between the top coat and the base coat on the samples, which APC concluded to be the cause of delamination. [DE 40-17, PagelD 704-708].

Coating and heat curing of the Balsam occurred during February and March of 2010.

Related

Cite This Page — Counsel Stack

Bluebook (online)
652 F. App'x 316, Counsel Stack Legal Research, https://law.counselstack.com/opinion/berhad-v-advanced-polymer-coatings-inc-ca6-2016.