Avidair Helicopter Supply, Inc. v. Rolls-Royce Corp.

663 F.3d 966, 101 U.S.P.Q. 2d (BNA) 1069, 2011 U.S. App. LEXIS 24620, 2011 WL 6155037
CourtCourt of Appeals for the Eighth Circuit
DecidedDecember 13, 2011
Docket10-3444
StatusPublished
Cited by36 cases

This text of 663 F.3d 966 (Avidair Helicopter Supply, Inc. v. Rolls-Royce Corp.) is published on Counsel Stack Legal Research, covering Court of Appeals for the Eighth Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
Avidair Helicopter Supply, Inc. v. Rolls-Royce Corp., 663 F.3d 966, 101 U.S.P.Q. 2d (BNA) 1069, 2011 U.S. App. LEXIS 24620, 2011 WL 6155037 (8th Cir. 2011).

Opinion

MELLOY, Circuit Judge.

This appeal comes to us from two consolidated suits brought under the Uniform Trade Secrets Acts of Indiana and Missouri. Both suits involve information about the repair and overhaul of helicopter engines published by Appellee Rolls-Royce Corp. Rolls-Royce sought damages and injunctive relief for alleged trade secret violations. Appellant AvidAir Helicopter Supply Inc. sought a declaration that the information in question was not protected by trade secret law. AvidAir also alleged that Rolls-Royce had violated antitrust laws and tortiously interfered with its business interest. In multiple summary judgment rulings below, the district court 1 held in favor of Rolls-Royce by finding that some, though not all, of the information in question was a protected trade secret. The court ruled against AvidAir on its antitrust and tortious interference claims. A jury later awarded Rolls-Royce $350,000 in actual damages, and the court issued a permanent injunction requiring AvidAir to return the protected documents to Rolls-Royce. AvidAir appeals the rulings. For the reasons stated below, we affirm.

I.

Rolls-Royce Corp. develops and produces the Model 250 engine used in civilian and military helicopters. Before 1994, Rolls-Royce’s predecessor, Allison Engine Co., did not exert tight control over access to the technical information required in the repair and overhaul market for these engines. This led to the development of third-party overhaul shops. AvidAir is a Missouri company that entered the repair and overhaul market in 1994. AvidAir’s business focuses on the overhaul of compressor cases, one of three modules in the Model 250 engine.

Federal regulations require that an overhauled engine be certified for return to service. In order to certify the return to service for a Model 250 engine, an overhaul shop must follow a procedure that has been approved by the Federal Aviation *970 Administration (FAA). The approved overhaul procedure for the Model 250 requires, inter alia, details about processes, procedures, techniques and material specifications contained in Distributor Overhaul Information Letters (DOILs) issued first by Allison, and later by Rolls-Royce. 2 DOIL 24 related specifically to the compressor case, and like the other DOILs, it was periodically updated through numbered revisions. Because Allison had not restricted the redistribution of earlier revisions, AvidAir was able to acquire DOIL 24, Revisions 1 through 7 from various sources sometime in the 1990s.

In 1994, Allison began to restructure its approach to the overhaul of Model 250 engines. Allison appointed twenty-five Authorized Maintenance Centers (AMCs) to whom it would exclusively issue technical information (such as DOILs and other overhaul manuals). Allison executed agreements with each AMC that specified the proprietary nature of this technical information, prohibited the AMCs from disseminating this information, and required the AMCs to return all proprietary documents at the end of their relationship. Allison also began including a proprietary rights legend on the front page of its DOILs. All of the documents at issue on appeal contain this rights legend.

Rolls-Royce, pic. acquired Allison in 1995 and eventually changed its name in 2002 to Rolls-Royce Corp. Rolls-Royce issued a cease and desist letter to AvidAir in 2002, demanding it stop using DOIL 24 in its overhaul of Model 250 engines. In 2003, the FAA responded to a Rolls-Royce complaint by inspecting AvidAir’s overhaul process. The FAA found that AvidAir was not following the latest approved overhaul instructions contained in DOIL 24, Revision 13. Because AvidAir was not an AMC, it had never been authorized to receive a copy of the latest DOIL. After the FAA inspection, AvidAir eventually obtained a copy of DOIL 24, Revision 13 without Rolls-Royce’s permission. Though there is a dispute about the extent to which AvidAir changed its overhaul procedure after obtaining Revision 13, AvidAir admits that it made adjustments for new measurements contained within Revision 13, and it certified to the FAA that it was in compliance with the document. AvidAir also obtained copies of other DOILs, though not all are at issue in this appeal. 3

On September 29, 2006, AvidAir filed suit in the Western District of Missouri seeking a declaration that Rolls-Royce’s DOILs were not trade secrets and alleging that Rolls-Royce violated antitrust laws and tortiously interfered with its business. According to AvidAir, DOIL 24 Revision 13 was substantially the same as earlier, publicly available revisions. On October 2, 2006, Rolls-Royce filed its own suit against AvidAir in the Southern District of Indiana for trade-secret violations under the Lanham Act. In 2007, both cases were consolidated and eventually transferred to the Western District of Missouri. The issues were bifurcated, and both parties filed for partial summary judgment as to the trade-secret status of DOIL 24. This issue was submitted to a magistrate *971 judge 4 for determination. On April 7, 2009, the magistrate judge issued a report and recommendation that the district court grant summary judgment in favor of Rolls-Royce as to DOIL 24, Revision 13 (finding it was a protected trade secret) but grant AvidAir summary judgment on Revisions 1-10 (finding they were not trade secrets). On June 23, 2009, the district court adopted the report in full. 5

On June 20, 2009, AvidAir acquired a full technical library from Precision Air Power, which was a branch of a Rolls-Royce AMC. Relying on this acquisition, AvidAir filed a motion to reconsider the district court’s Order of June 23, 2009 and a motion for leave to amend the complaint. AvidAir argued that its purchase of Precision’s library demonstrated AMCs were not restricted from distributing information pertaining to the Model 250 engine and that the information was therefore in the public domain. The court found that the proprietary-rights legends on the documents, as well as Rolls-Royce’s AMC Agreement (under which Precision was prohibited from disclosing confidential materials) contradicted this argument. The district court concluded that the time for amending the pleadings was long passed, and on September 23, 2009, it denied AvidAir’s motion in full.

Both parties again filed motions for summary judgment, and the district court granted motions in favor of Rolls-Royce on AvidAir’s antitrust claim, AvidAir’s tortious interference claim, and Rolls-Royce’s trade secret claims involving DOIL 3 and DOIL 8. The issue of damages was submitted to a jury, which awarded Rolls-Royce $350,000 in actual damages. After the jury award, the district court granted in part Rolls-Royce’s Motion for Permanent Injunction. Pursuant to the injunction, AvidAir is required to return all of Rolls-Royce’s trade secrets, but AvidAir is not prevented from continuing to operate in the Model 250 overhaul market according to procedures developed from publicly available knowledge.

AvidAir appeals the court’s rulings.

II.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Cite This Page — Counsel Stack

Bluebook (online)
663 F.3d 966, 101 U.S.P.Q. 2d (BNA) 1069, 2011 U.S. App. LEXIS 24620, 2011 WL 6155037, Counsel Stack Legal Research, https://law.counselstack.com/opinion/avidair-helicopter-supply-inc-v-rolls-royce-corp-ca8-2011.