American Permac, Inc. And Boewe Maschinenfabrik, Gmbh, Boewe Systems & MacHinery Inc. v. The United States

831 F.2d 269, 1987 U.S. App. LEXIS 603
CourtCourt of Appeals for the Federal Circuit
DecidedOctober 15, 1987
Docket87-1159
StatusPublished
Cited by21 cases

This text of 831 F.2d 269 (American Permac, Inc. And Boewe Maschinenfabrik, Gmbh, Boewe Systems & MacHinery Inc. v. The United States) is published on Counsel Stack Legal Research, covering Court of Appeals for the Federal Circuit primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
American Permac, Inc. And Boewe Maschinenfabrik, Gmbh, Boewe Systems & MacHinery Inc. v. The United States, 831 F.2d 269, 1987 U.S. App. LEXIS 603 (Fed. Cir. 1987).

Opinion

SKELTON, Senior Circuit Judge.

This is an appeal by the plaintiffs from a decision of the United States Court of International Trade (the court) in American Permac, Inc., Boewe et al. v. United States, — CIT —, 656 F.Supp. 1228 (1986). The facts in the case as stated by the court are as follows.

Plaintiffs, a West German manufacturer of dry cleaning machinery and its American importer and distributor 1 (“Boewe et al.”), brought this action challenging a final determination of the International Trade Commission (“ITC” or “Commission”). *271 The determination arose from an administrative review conducted pursuant to § 751(b) of the Tariff Act of 1930, 19 U.S.C. § 1675(b) (1982). 2 The ITC concluded that West German imports of dry cleaning machinery would materially injure the domestic industry if the antidumping duty order covering those imports were modified or revoked. Drycleaning Machinery From the Federal Republic of Germany, Inv. No. 751-TA-9 (Final), USITC Pub. 1617 (Dec. 1984). Plaintiffs filed a motion for judgment upon the agency record, pursuant to Rule 56.1 of the court, seeking reversal of the determination on the ground that it is not supported by substantial evidence on the agency record.

ITC Determination

In 1972, following an injury determination by the United States Tariff Commission (predecessor to the ITC), the Treasury Department issued an antidumping finding covering dry cleaning machinery imported from West Germany. T.D. 72-311, 37 Fed. Reg. 23715 (Nov. 8, 1972). That finding remained in effect on the effective date of the Trade Agreements Act of 1979, and thus became subject to the administrative review procedures set forth in 19 U.S.C. § 1675(b). See Matsushita Electric Industrial Co., Ltd. v. United States, 2 CIT 263, 529 F.Supp. 670 (1981). In May 1984, plaintiffs, Boewe et al., filed a request for such a review with the ITC. The Commission thereafter determined that changed circumstances existed sufficient to warrant a review investigation, and published notice of the investigation in the Federal Register on August 15, 1984 (49 Fed.Reg. 32692). The ITC review covered the dry cleaning machinery imports of two West German manufacturers, petitioner Boewe Maschinenfabrik GmbH (“Boewe”), and Seco Maschinenbau GmbH & Co. Kommanditgesellschaft (“Seco”). A public hearing was held on October 31, 1984. Plaintiffs were the only private parties to participate in the investigation or to appear at the hearing. 3

Plaintiffs’ presentation at the public hearing consisted primarily of testimony by Peter Boden, chairman of the plaintiff West German producer/exporter, and William A. Hayday, president of the plaintiff importing and marketing subsidiaries. Boden and Hayday indicated that Boewe’s current pricing policy calculates prices for the same models which are uniform throughout the world and do not include dumping margins. They stated that removal of the dumping order would have no effect on Boewe’s pricing structure. They also testified that limitations in Boewe’s production capacity would prevent any short-term material increase in shipments to the United States market beyond current projections.

In its final determination, published in December, 1984, the Commission described its task as follows:

As stated in Television Receiving Sets From Japan [Inv. No. 751-TA-2, USITC Pub. 1153 at 9 (1981)], Section 751(b) requires us—
... to assess the inhibiting effect that the [outstanding antidumping] order has on the pricing, production, and marketing strategies of companies subject to it, to predict the effect of revocation on those strategies and on the market place, and then to determine whether those effects would re- *272 suit in material injury or threat thereof to the domestic industry.
Section 751(b) evaluations assume that any dumping is being offset by the existing order and require us to forecast what will happen if the order is revoked or modified. The analysis starts from the legally required assumption that [less-than-fair-value] sales will continue or resume once the dumping order is removed, and consists of two steps: (1) forecasting the likely behavior of the foreign manufacturers and the importers in the event the antidumping order were revoked or modified; and (2) determining whether injury to a domestic industry would result from the modification or revocation of the antidumping order based on that forecast.

USITC Pub. 1617 at 4-6 (footnotes omitted).

The Commission first examined the effect of revocation of the antidumping order on West German producers and concluded, despite the contrary declarations of plaintiffs’ witnesses, that revocation would affect the volume and price of West German imports. With respect to volume, the Commission found that Boewe had the intent and the capability to increase the volume of exports to the United States in the immediate future. Most Boewe machines currently exported to the United States are of its “flexible” (or “flex”) models — so called because they can be modified to increase or decrease capacity — which Boewe developed specifically for the American market. The Commission noted that imports from West Germany have increased substantially beginning in 1983 (when Boewe introduced its “flex” line), and that Boewe’s stated numerical goal for exports to the United States was significantly higher than present levels. With respect to pricing, the Commission found that some degree of price competition existed between West German and domestic machines, and that revocation of the antidumping order would permit greater price flexibility for West German imports. The Commission concluded that an increase in market penetration by West German imports would be aided by revocation of the antidumping order. The Commission noted, however, that its analysis was complicated by the fact that no final dumping margins had been calculated since 1974, and the only available preliminary margins from the International Trade Administration (“ITA”) of the Commerce Department were issued in 1981 (covering entries between July 1979 and June 1980) 4 and thus antedated the introduction of Boewe’s “flex” machines.

The Commission then examined the domestic industry, which it found to be weak and vulnerable to dumped imports from West Germany. Because of their current low profitability, the Commission found it unlikely that domestic producers of dry cleaning machinery could reduce their prices to meet increased competition from West German imports stemming from revocation of the antidumping order. The Commission determined, therefore, that revocation of the antidumping order would materially injure the domestic industry.

The plaintiffs appealed to the Court of International Trade seeking reversal of the ITC’s determination on the ground that it is unsupported by substantial evidence on the record.

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Committee for Fairly Traded Venezuelan Cement v. United States
279 F. Supp. 2d 1314 (Court of International Trade, 2003)
American Silicon Technologies v. United States
334 F.3d 1033 (Federal Circuit, 2003)
Timken Co. v. United States
264 F. Supp. 2d 1264 (Court of International Trade, 2003)
Titanium Metals Corp. v. United States
155 F. Supp. 2d 750 (Court of International Trade, 2001)
Zenith Electronics Corporation v. United States
99 F.3d 1576 (Federal Circuit, 1997)
AOC International, Ltd. v. United States
99 F.3d 1576 (Federal Circuit, 1996)
Gerald Metals, Inc. v. United States
937 F. Supp. 930 (Court of International Trade, 1996)
Granite Construction Company v. The United States
962 F.2d 998 (Federal Circuit, 1992)
The Torrington Company v. The United States
938 F.2d 1276 (Federal Circuit, 1991)
Torrington Co. v. United States
938 F.2d 1278 (Federal Circuit, 1991)
The Torrington Company v. United States
938 F.2d 1278 (Federal Circuit, 1991)
Matsushita Electric Industrial Co. v. United States
929 F.2d 1577 (Federal Circuit, 1991)
A. Hirsh, Inc. v. United States
737 F. Supp. 1186 (Court of International Trade, 1990)
Metallverken Nederland B v. v. United States
728 F. Supp. 730 (Court of International Trade, 1989)
Avesta AB v. United States
724 F. Supp. 974 (Court of International Trade, 1989)
National Ass'n of Mirror Manufacturers v. United States
696 F. Supp. 642 (Court of International Trade, 1988)
Algoma Steel Corp., Ltd. v. United States
688 F. Supp. 639 (Court of International Trade, 1988)

Cite This Page — Counsel Stack

Bluebook (online)
831 F.2d 269, 1987 U.S. App. LEXIS 603, Counsel Stack Legal Research, https://law.counselstack.com/opinion/american-permac-inc-and-boewe-maschinenfabrik-gmbh-boewe-systems-cafc-1987.