South Carolina § 23-37-20 Safety glazing labeling.

South Carolina Statutes

§ 23-37-20 — Safety glazing labeling.

South Carolina § 23-37-20

Title 23LAW ENFORCEMENT AND PUBLIC SAFETY

Ch. 37SAFETY GLAZING MATERIALS

This text of South Carolina § 23-37-20 (Safety glazing labeling.) is published on Counsel Stack Legal Research, covering South Carolina primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

S.C. Code Ann. § 23-37-20 (2026).

Text

(a)Each lite of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations, or installed in such a location, within the State of South Carolina shall be permanently labeled by such means as etching, sandblasting, firing of ceramic material, hot-die stamping, transparent pressure sensitive labels, or by other suitable means. The label shall identify the seller, whether manufacturer, fabricator, or installer, the nominal thickness and the type of safety glazing material, and the fact that the material meets the test requirements of the American National Standards Institute Standard (ANSI Standard) Z-97.1-1972. The label must be legible and visible after installation.

(b)Such safety glazing labeling shall not be used on other than safety glazing mate

Free access — add to your briefcase to read the full text and ask questions with AI

(a) Each lite of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations, or installed in such a location, within the State of South Carolina shall be permanently labeled by such means as etching, sandblasting, firing of ceramic material, hot-die stamping, transparent pressure sensitive labels, or by other suitable means. The label shall identify the seller, whether manufacturer, fabricator, or installer, the nominal thickness and the type of safety glazing material, and the fact that the material meets the test requirements of the American National Standards Institute Standard (ANSI Standard) Z-97.1-1972. The label must be legible and visible after installation. (b) Such safety glazing labeling shall not be used on other than safety glazing materials.