Pennsylvania § 3218.4 Corrosion control requirements

Pennsylvania Statutes

§ 3218.4 — Corrosion control requirements

Pennsylvania § 3218.4

JurisdictionPennsylvania

Title 58OIL AND GAS

PartPART III

Ch. 32DEVELOPMENT

Subch.GENERAL REQUIREMENTS

This text of Pennsylvania § 3218.4 (Corrosion control requirements) is published on Counsel Stack Legal Research, covering Pennsylvania primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

58 Pa. Cons. Stat. § 3218.4 (2026).

Text

(a)Pipelines.--All buried metallic pipelines shall be installed and placed in operation in accordance with 49 CFR Pt. 192 Subpt. I (relating to requirements for corrosion control).

(b)Tanks.--Permanent aboveground and underground tanks must comply with the applicable corrosion control requirements in the department's storage tank regulations.

(c)Other structures.--For all other buried metallic structures, including well casings, the Environmental Quality Board shall promulgate regulations setting forth methods of determining the need for corrosion protection and installing necessary corrosion protection.

(d)Procedures.--The corrosion control procedures under subsections (a) and (b) must be carried out by or under the direction of a person qualified in corrosion methods.

(e)Complia

Free access — add to your briefcase to read the full text and ask questions with AI

(a) Pipelines.--All buried metallic pipelines shall be installed and placed in operation in accordance with 49 CFR Pt. 192 Subpt. I (relating to requirements for corrosion control).

(b) Tanks.--Permanent aboveground and underground tanks must comply with the applicable corrosion control requirements in the department's storage tank regulations.

(c) Other structures.--For all other buried metallic structures, including well casings, the Environmental Quality Board shall promulgate regulations setting forth methods of determining the need for corrosion protection and installing necessary corrosion protection.

(d) Procedures.--The corrosion control procedures under subsections (a) and (b) must be carried out by or under the direction of a person qualified in corrosion methods.

(e) Compliance.--An operator of a new, replaced, relocated or otherwise changed pipeline must be in compliance with the applicable requirements of this section by the date the pipeline goes into service.

Legislative History

Special Provisions in Appendix.See section 4(3)(x) of Act 13 of 2012 in the appendix to this title for special provisions relating to continuation of prior law.