New Hampshire § 141-E:6 Indoor Asbestos Exposure Standards

New Hampshire Statutes

§ 141-E:6 — Indoor Asbestos Exposure Standards

New Hampshire § 141-E:6

Title XPUBLIC HEALTH

Ch. 141-EASBESTOS MANAGEMENT AND CONTROL

This text of New Hampshire § 141-E:6 (Indoor Asbestos Exposure Standards) is published on Counsel Stack Legal Research, covering New Hampshire primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

N.H. Rev. Stat. Ann. § 141-E:6 (2026).

Text

I.The indoor non-occupational exposure standard shall be 0.01 fibers longer than 5 microns per cubic centimeter of air as determined by OSHA/NIOSH phase contrast optical microscopy methods, calculated as an 8-hour time weighted average.

II.The indoor occupational exposure standard shall be as provided for by the federal Occupational Safety and Health Administration in 29 CFR 1910, and the federal Environmental Protection Agency in 40 CFR 763, except that, where such standards exceed 0.1 fibers longer than 5 microns per cubic centimeter of air as determined by OSHA/NIOSH phase contrast optical microscopy methods, then the occupational standards shall be 0.1 fibers longer than 5 microns per cubic centimeter of air as determined by OSHA/NIOSH phase contrast optical microscopy methods.

Free access — add to your briefcase to read the full text and ask questions with AI

I. The indoor non-occupational exposure standard shall be 0.01 fibers longer than 5 microns per cubic centimeter of air as determined by OSHA/NIOSH phase contrast optical microscopy methods, calculated as an 8-hour time weighted average.
II. The indoor occupational exposure standard shall be as provided for by the federal Occupational Safety and Health Administration in 29 CFR 1910, and the federal Environmental Protection Agency in 40 CFR 763, except that, where such standards exceed 0.1 fibers longer than 5 microns per cubic centimeter of air as determined by OSHA/NIOSH phase contrast optical microscopy methods, then the occupational standards shall be 0.1 fibers longer than 5 microns per cubic centimeter of air as determined by OSHA/NIOSH phase contrast optical microscopy methods.