Montana Statutes

§ 50-74-217 — Other Inspection Requirements

Montana·Title 50 HEALTH AND SAFETY·Ch. 74 BOILERS AND STEAM ENGINES·Part 2 Inspections

50-74-217 . Other inspection requirements. The inspector must be satisfied that:

(1)the safety valves are of suitable relieving capacity ratings, sufficient in number and area, and properly arranged and properly adjusted so as not to allow a greater pressure in a boiler than the amount prescribed by the inspection certificate;
(2)there are a sufficient number of gauge cocks properly inserted to indicate the amount of water and suitable gauges that will correctly record the pressure of steam; and
(3)adequate and certain provisions for an ample supply of water to feed the boiler at all times and suitable means for blowing out are provided so as to thoroughly remove mud and sediment from all parts of the boiler when it is under pressure of steam.

Free access — add to your briefcase to read the full text and ask questions with AI

Montana § 50-74-217 (Other Inspection Requirements) — published by Counsel Stack Legal Research, free access to 12M+ legal documents.

Legislative History

En. Sec. 555, Pol. C. 1895; re-en. Sec. 1644, Rev. C. 1907; amd. Sec. 6, Ch. 30, L. 1913; re-en. Sec. 2715, R.C.M. 1921; re-en. Sec. 2715, R.C.M. 1935; amd. Sec. 4, Ch. 225, L. 1971; amd. Sec. 9, Ch. 187, L. 1977; R.C.M. 1947, 69-1504(1); amd. Sec. 1890, Ch. 56, L. 2009.

Nearby Sections

15
View on official source ↗