Michigan § 290.609a Weighing device; measuring device; certificates of conformance; participating laboratory.

Michigan Statutes

§ 290.609a — Weighing device; measuring device; certificates of conformance; participating laboratory.

Michigan § 290.609a

Ch. 290WEIGHTS, MEASURES, AND STANDARDS

Act 283 of 1964WEIGHTS AND MEASURES ACT (290.601-290.635)

This text of Michigan § 290.609a (Weighing device; measuring device; certificates of conformance; participating laboratory.) is published on Counsel Stack Legal Research, covering Michigan primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Mich. Comp. Laws § 290.609a (2026).

Text

WEIGHTS AND MEASURES ACT (EXCERPT) Act 283 of 1964 290.609a Weighing device; measuring device; certificates of conformance; participating laboratory. Sec. 9a.

(1)A weighing device placed in service after January 1, 1988 must have valid certificates of conformance before use for commercial or law enforcement purposes. A non-NTEP weighing device for special use may be used for products for which an NTEP weighing device is not readily available, if all of the following conditions are met:

(a)The device owner receives written approval from the director.

(b)The device is tested on an annual basis by a registered service agency.

(c)The registered service agency records all testing data and the records are retained on site and made available to the department on request.

(2)A measuring devic

Free access — add to your briefcase to read the full text and ask questions with AI

WEIGHTS AND MEASURES ACT (EXCERPT) Act 283 of 1964 290.609a Weighing device; measuring device; certificates of conformance; participating laboratory. Sec. 9a. (1) A weighing device placed in service after January 1, 1988 must have valid certificates of conformance before use for commercial or law enforcement purposes. A non-NTEP weighing device for special use may be used for products for which an NTEP weighing device is not readily available, if all of the following conditions are met: (a) The device owner receives written approval from the director. (b) The device is tested on an annual basis by a registered service agency. (c) The registered service agency records all testing data and the records are retained on site and made available to the department on request. (2) A measuring device placed in service on or after October 29, 2002 must have valid certificates of conformance before use for commercial or law enforcement purposes. A non-NTEP measuring device for special use may be used for products for which an NTEP measuring device is not readily available, if all of the following conditions are met: (a) The device owner receives written approval from the director. (b) The device is tested on an annual basis by a registered service agency. (c) The registered service agency records all testing data and the records are retained on site and made available to the department on request. (3) The director may operate a participating laboratory as part of NTEP. The director may charge and collect fees pursuant to section 10b for services rendered by the participating laboratory.