Maine § 25 §2447-B Foam plastic insulation standards

Maine Statutes

§ 25 §2447-B — Foam plastic insulation standards

Maine § 25 §2447-B

Title 25INTERNAL SECURITY AND PUBLIC SAFETY

Part 6FIRE PREVENTION AND FIRE PROTECTION

Ch. 317PREVENTIVE MEASURES AND RESTRICTIONS

This text of Maine § 25 §2447-B (Foam plastic insulation standards) is published on Counsel Stack Legal Research, covering Maine primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Me. Rev. Stat. tit. 25, § 25 §2447-B (2026).

Text

1.Prohibition. No individual, partnership or corporation shall install in this State any type of foam plastic insulation unless that product complies with and is installed in accordance with the following requirements.

2.Alternate installations. Foam plastics may be used in applications other than as listed in this section, when specifically approved by the State Fire Marshal based on diversified tests such as the Factory Mutual Building Corner Test Procedure or the enclosed room test procedures described in Underwriters Laboratories Subject 723. These approvals shall also be based on tests conducted in accordance with ASTM E-84 and ASTM D1929. Testing shall be performed on the finished manufactured foam plastic assemblies and on the maximum thickness intended for use.

3.Penalty. Any vi

Free access — add to your briefcase to read the full text and ask questions with AI

1.
Prohibition.
No individual, partnership or corporation shall install in this State any type of foam plastic insulation unless that product complies with and is installed in accordance with the following requirements.
2.
Alternate installations.
Foam plastics may be used in applications other than as listed in this section, when specifically approved by the State Fire Marshal based on diversified tests such as the Factory Mutual Building Corner Test Procedure or the enclosed room test procedures described in Underwriters Laboratories Subject 723. These approvals shall also be based on tests conducted in accordance with ASTM E-84 and ASTM D1929. Testing shall be performed on the finished manufactured foam plastic assemblies and on the maximum thickness intended for use.
3.
Penalty.
Any violation of this section shall be a Class E crime.

Legislative History

PL 1979, c. 167 (NEW). PL 1981, c. 101 (AMD). RR 1991, c. 2, §96 (COR).

Nearby Sections

3

§ 25 §2447

Approval of certain compounds

§ 25 §2447-A

Cellulose fiber insulation standards

§ 25 §2447-B

Foam plastic insulation standards

View on official source ↗

Cite This Page — Counsel Stack

Bluebook (online)

Maine § 25 §2447-B, Counsel Stack Legal Research, https://law.counselstack.com/statute/me/25%20%C2%A72447-B.