Idaho § 22-905 APPLICATION OF TOLERANCES

Idaho Statutes

§ 22-905 — APPLICATION OF TOLERANCES

Idaho·Title 22 AGRICULTURE AND HORTICULTURE·Ch. 9 POTATOES — GRADING AND PACKING

All percentages shall be calculated on the basis of weight.
The tolerances for the standards are on a container basis. However, if the averages for the entire lot, based on sample inspection, are within the tolerances specified in the standards, the contents of individual packages in the lot may vary from the specified tolerances subject to the following limitations.
In packages containing over 15 specimens, when the tolerance specified is 10 percent or more, not over one tenth (1/10) of the individual packages in the lot may contain more than one and one-half (1 1/2) times the tolerance, but no package may contain more than four (4) times the tolerance for soft rot or wet breakdown.
When the tolerance specified is less than 10 percent, not over one tenth (1/10) of the individual packages 

Free access — add to your briefcase to read the full text and ask questions with AI

All percentages shall be calculated on the basis of weight.
The tolerances for the standards are on a container basis. However, if the averages for the entire lot, based on sample inspection, are within the tolerances specified in the standards, the contents of individual packages in the lot may vary from the specified tolerances subject to the following limitations.
In packages containing over 15 specimens, when the tolerance specified is 10 percent or more, not over one tenth (1/10) of the individual packages in the lot may contain more than one and one-half (1 1/2) times the tolerance, but no package may contain more than four (4) times the tolerance for soft rot or wet breakdown.
When the tolerance specified is less than 10 percent, not over one tenth (1/10) of the individual packages in any lot may contain more than double the tolerance specified, but no package may contain more than four (4) times the tolerance for soft rot or wet breakdown.
In packages containing 15 specimens, or less, not over one tenth (1/10) of the individual packages in any lot may contain more than double any tolerance specified, except that at least one (1) defective specimen shall be permitted in a package.

Idaho § 22-905 (APPLICATION OF TOLERANCES) — published by Counsel Stack Legal Research, free access to 12M+ legal documents.