Delaware § 4507 Weighing equipment and procedures

Delaware Statutes

§ 4507 — Weighing equipment and procedures

Delaware § 4507

Title21

PartOperation and Equipment

Ch. 45SIZE AND WEIGHT OF VEHICLES AND LOADS

This text of Delaware § 4507 (Weighing equipment and procedures) is published on Counsel Stack Legal Research, covering Delaware primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Del. Code tit. 21, § 4507 (2026).

Text

(a)The Secretary of Safety and Homeland Security may adopt such regulations and procedures as may be necessary to implement this section and to select such equipment as may be necessary for law-enforcement weighing purposes.

(b)Equipment used for law-enforcement weighing may include, but is not limited to, the following:

(1)“Vehicle scale”;

(2)“Axle load scale”;

(3)“Wheel load weigher”.

(c)The tolerance or permissible error from true value for weighing devices utilized for law-enforcement purposes shall be those which have been adopted by the Division of Standards and Inspection of the State Department of Agriculture.

(d)Vehicle weights may be determined by either of the methods defined as follows:

(1)“Single draft weighting”;

(2)“Multiple draft weighting”.

Free access — add to your briefcase to read the full text and ask questions with AI

(a) The Secretary of Safety and Homeland Security may adopt such regulations and procedures as may be necessary to implement this section and to select such equipment as may be necessary for law-enforcement weighing purposes.

(b) Equipment used for law-enforcement weighing may include, but is not limited to, the following:

(1) “Vehicle scale”;

(2) “Axle load scale”;

(3) “Wheel load weigher”.

(c) The tolerance or permissible error from true value for weighing devices utilized for law-enforcement purposes shall be those which have been adopted by the Division of Standards and Inspection of the State Department of Agriculture.

(d) Vehicle weights may be determined by either of the methods defined as follows:

(1) “Single draft weighting”;

(2) “Multiple draft weighting”.