§ 9-4-115 — New miniature boiler installations

(1) No miniature boiler, except
those exempted by rules promulgated by the division of oil and public safety, shall
be installed in this state unless it has been constructed, inspected, and stamped in
conformity with the rules of construction of miniature boilers of the A.S.M.E. boiler
and pressure vessel code and is registered with the national board of boiler and
pressure vessel inspectors and inspected in accordance with this article.

(2) A miniature boiler having the standard stamping of another state that has
adopted a standard of construction equivalent to the standard of the state of
Colorado may be accepted by the director; however, the person or firm desiring to
install the boiler shall make application for the installation and shall file with this
application the manufacturer's data report covering the construction of the boiler in
question.

(3) All new boiler installations and reinstalled boilers shall be installed in
accordance with the requirements of the A.S.M.E. boiler and pressure vessel code
and this article.

(4) Upon completion of the installation, all boilers shall be inspected by a
state or special boiler inspector. At the time of inspection, each boiler shall be
assigned a serial number by the inspector, which serial number shall be stamped on
or affixed to the boiler as provided by section 9-4-106 (3).

Legislative History

Source: L. 71: R&RE, p. 281, � 1. C.R.S. 1963: � 17-3-15. L. 2001: (1) amended, p. 1137, � 64, effective June 5.