JurisdictionCaliforniaCode HSCHealth and Safety Code - HSC
Div. 26.DIVISION 26. AIR RESOURCES
Part 4.PART 4. NONVEHICULAR AIR POLLUTION CONTROL
Ch. 1.CHAPTER 1. General Provisions
This text of California § 41514.6. (41514.6. (Added by Stats. 2024, Ch. 743, Sec. 3.)) is published on Counsel Stack Legal Research, covering California primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.
(a)On or before January 1, 2027, a district the jurisdiction of which includes metal shredding facilities, in consultation with the Department of Toxic Substances Control and the Office of Environmental Health Hazard Assessment, shall develop requirements for facilitywide fence-line air quality monitoring at metal shredding facilities, as defined in Section 25150.82, that are subject to Section 25150.84 and this section.
(b)The requirements developed pursuant to subdivision (a) shall include, but not be limited to, all of the following:
(1)Development of threshold levels, in consultation with the Office of Environmental Health Hazard Assessment, for airborne contaminants,
including, but not limited to, lead, zinc, cadmium, and nickel, at the fence lines of metal shredding faciliti
Free access — add to your briefcase to read the full text and ask questions with AI
(a)
On or before January 1, 2027, a district the jurisdiction of which includes metal shredding facilities, in consultation with the Department of Toxic Substances Control and the Office of Environmental Health Hazard Assessment, shall develop requirements for facilitywide fence-line air quality monitoring at metal shredding facilities, as defined in Section 25150.82, that are subject to Section 25150.84 and this section.
(b)
The requirements developed pursuant to subdivision (a) shall include, but not be limited to, all of the following:
(1)
Development of threshold levels, in consultation with the Office of Environmental Health Hazard Assessment, for airborne contaminants,
including, but not limited to, lead, zinc, cadmium, and nickel, at the fence lines of metal shredding facilities that are protective of air quality and public health. The threshold levels shall follow health guidance values adopted by the Office of Environmental Health Hazard Assessment, if available.
(2)
Development of threshold levels for community notification of potential adverse impact on public health based on the threshold values developed pursuant to paragraph (1).
(3)
Development of actions, in consultation with the Department of Toxic Substances Control, to be taken by metal shredding facilities if threshold levels developed pursuant to paragraph (1) are exceeded, and a method of enforcing those actions.
(4)
Development of community notification procedures to inform the public in areas in which the metal
shredding facility is located, if the monitoring required pursuant to this subdivision indicates the threshold levels developed pursuant to paragraph (2) were exceeded.
(5)
Reporting the results of the monitoring required pursuant to this subdivision to the district and the local public health department.
(c)
All metal shredding facilities subject to this section shall implement the facilitywide fence-line air quality monitoring developed pursuant to this section.
(d)
On or before July 1, 2027, a district the jurisdiction of which includes metal shredding facilities shall adopt regulations to implement, interpret, or make specific the requirements pursuant to this section.
(e)
A district the jurisdiction of which includes metal shredding facilities
shall oversee and enforce the compliance of metal shredding facilities with regulations adopted pursuant to subdivision (d).
(f)
Any reasonable regulatory costs incurred by a district in implementing this section may be reimbursed pursuant to its fee authority.
(g)
The Office of Environmental Health Hazard Assessment’s costs to implement this section shall be reimbursed from the subaccount established in the Hazardous Waste Control Account pursuant to Section 25150.84.