California § 25230.10. 25230.10. (Added by Stats. 2021, Ch. 147, Sec. 2.)

California Statutes

§ 25230.10. — 25230.10. (Added by Stats. 2021, Ch. 147, Sec. 2.)

California § 25230.10.

JurisdictionCalifornia

Code HSCHealth and Safety Code - HSC

Div. 20.DIVISION 20. MISCELLANEOUS HEALTH AND SAFETY PROVISIONS

Ch. 6.5.CHAPTER 6.5. Hazardous Waste Control

Art. 11.2.ARTICLE 11.2. Management of Treated Wood Waste

This text of California § 25230.10. (25230.10. (Added by Stats. 2021, Ch. 147, Sec. 2.)) is published on Counsel Stack Legal Research, covering California primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook

Cal. Health and Safety Code - HSC Code § 25230.10. (2026).

Text

(a)For purposes of this section, “resizing” means minimal cutting, breaking, or sawing, but does not include planing, grinding, drilling, chipping, sanding, shredding, mulching, or other mechanical handling or any other treatment.

(b)Except as provided in subdivisions (c) and (d), treatment, as defined in Section 25123.5, of treated wood waste managed in accordance with the alternative management standards of this article is prohibited.

(c)Resizing is exempt from the permitting requirements of this chapter when resized to facilitate transport or reuse and the following requirements are met:

(1)The treated wood waste is handled in a manner that prevents the uncontrolled release of hazardous constituents to the environment.

(2)If size reduction of the treated wood waste results in

Free access — add to your briefcase to read the full text and ask questions with AI

(a)
For purposes of this section, “resizing” means minimal cutting, breaking, or sawing, but does not include planing, grinding, drilling, chipping, sanding, shredding, mulching, or other mechanical handling or any other treatment.
(b)
Except as provided in subdivisions (c) and (d), treatment, as defined in Section 25123.5, of treated wood waste managed in accordance with the alternative management standards of this article is prohibited.
(c)
Resizing is exempt from the permitting requirements of this chapter when resized to facilitate transport or reuse and the following requirements are met:
(1)
The treated
wood waste is handled in a manner that prevents the uncontrolled release of hazardous constituents to the environment.
(2)
If size reduction of the treated wood waste results in sawdust, particles, or other material smaller than one cubic inch, the material is captured and managed as treated wood waste.
(d)
Sorting and segregating are both exempt from the hazardous waste permitting requirements of this chapter. The treated wood waste shall be handled in a manner that prevents the uncontrolled release of hazardous constituents to the environment.
(e)
An employer resizing, sorting, or segregating treated wood waste shall comply with the employee training requirements of Section 25230.12 for all applicable employees.

Legislative History

Added by Stats. 2021, Ch. 147, Sec. 2. (AB 332) Effective August 31, 2021. Conditionally repealed on or after January 1, 2030, pursuant to Section 25230.18.