UUSI, LLC v. Futaba Corporation of America

CourtDistrict Court, E.D. Michigan
DecidedSeptember 30, 2025
Docket2:24-cv-13104
StatusUnknown

This text of UUSI, LLC v. Futaba Corporation of America (UUSI, LLC v. Futaba Corporation of America) is published on Counsel Stack Legal Research, covering District Court, E.D. Michigan primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
UUSI, LLC v. Futaba Corporation of America, (E.D. Mich. 2025).

Opinion

UNITED STATES DISTRICT COURT EASTERN DISTRICT OF MICHIGAN SOUTHERN DIVISION

UUSI, LLC,

Plaintiff, Case No. 2:24-cv-13104

v. Honorable Susan K. DeClercq United States District Judge FUTABA CORPORATION OF AMERICA, et al.,

Defendants. _____________________________________/

OPINION AND ORDER GRANTING IN PART AND DENYING IN PART DEFENDANT FUTABA CORPORATION OF AMERICA’S MOTION TO DISMISS (ECF No. 13)

Printed circuit board assemblies (PCBAs) are at the center of this patent and copyright infringement case. Plaintiff Nartron1—a Michigan corporation— engineers and produces PCBAs that are designed specifically for use in the center stack of vehicles—the core dashboard area from which drivers control things like interior climate, audio, navigation, and other such electronic features. According to Plaintiff, Defendants have infringed on both Plaintiff’s patent for the physical design of these PCBAs and Plaintiff’s copyright for the software code within these PCBAs.

1 Although Plaintiff identifies itself in its complaint as UUSI, LLC, it conducts business under the name “Nartron,” and thus will be referred to as such in this opinion and order. See ECF No. 1 at PageID.1 (explaining that UUSI conducts business under the name “Nartron.”). Now before this Court is Defendant Futaba Corporation of America’s (“Futaba America”) motion to dismiss Plaintiff’s complaint. Futaba America argues

that UUSI’s patent-infringement claims must be dismissed under the doctrine of collateral estoppel because the issue of who owned the intellectual property related to the PCBAs was already litigated in state court. And it argues that Plaintiff’s

copyright infringement claim must be dismissed because it was filed beyond the statute of limitations. But, as explained below, Futaba America’s motion will only be narrowly granted to the extent that any copyright infringement claims relying on alleged acts

of infringement beyond the statute of limitations will be dismissed. It will be denied in all other respects, as not all of UUSI’s copyright claims are barred, and none of its patent infringement claims are barred.

I. BACKGROUND A. 2012–2013: Initial Engineering and Production of PCBAs Plaintiff Nartron is a Michigan LLC based in Reed City, Michigan. ECF No. 1 at PageID.1. Nartron describes itself as “a leading innovator in the design,

development, manufactur[ing], and marketing of electronic systems and components” for myriad vehicles. Id. at PageID.2. In 2011, JVIS—a nonparty to this litigation—hired Nartron “to engineer and

produce the PCBAs to integrate into JVIS’S instrument panel bezels” that would eventually be used in several vehicles manufactured by Stellantis, including the 2014-21 Dodge Durango, the 2014-15 Jeep Grand Cherokee, and certain Dodge

Charger and Chrysler 3000 models. Id. at PageID.3. In July 2012, JVIS “scheduled a site visit for Futaba”2—a direct competitor of Nartron’s—“at Nartron’s facilities under the false pretense that Futaba intended

to create a backseat climate control module for the 2014 Chrysler Jeep Grand Cherokee.” Id. at PageID.8. Nartron alleges that after Futaba visited Nartron’s facilities, JVIS “demanded” price reductions, a “substantial increase in order quantity (to build a bank of parts), and an unreasonably accelerated production

timeline.” Id. Nartron alleges that JVIS made these demands “to cause Nartron’s breach of contract” so JVIS could terminate its agreement with Nartron. Id. In September 2012, Nartron’s engineering director and director of technical

program management, Thomas J. Gronski, resigned from Nartron and “became an independent contractor for JVIS.” Id. One month later, JVIS demanded samples of PCBAs from Nartron and identification of all components within the samples. Id. at

2 In its complaint, Nartron does not distinguish between Futaba Corporation of America and Futaba Corporation. See generally ECF No. 1. Accordingly, this Court reasonably infers in Nartron’s favor that all references to “Futaba” relate to both corporate Futaba defendants. See Lambert v. Hartman, 517 F.3d 433, 439 (6th Cir. 2008) (noting at the motion-to-dismiss stage, the court draws all reasonable inferences in the plaintiff’s favor). In reciting the facts as alleged by Plaintiff, this Court will use “Futaba” to refer Futaba Corporation of America and Futaba Corporation, but “Futaba America” to refer to only Futaba Corporation of America. PageID.9. JVIS then provided these prototype PCBAs to Futaba. Id. Nartron alleges that JVIS also shared Nartron’s design files, testing data, software code,

manufacturing layouts and specifications, and production-part-approval process package materials with Futaba. Id. at PageID.3. Nartron alleges that Futaba used the information JVIS provided Futaba to

reverse engineer “each and every aspect” of Nartron’s PCBA, “including the arrangement of the software code embedded therein.” Id. After Futaba successfully reverse engineered Nartron’s PCBA’s, sometime in 2012, JVIS terminated its contract with Nartron for PCBA production and instead contracted with Futaba for

PCBA production. Id. B. 2013–2017: State Court Litigation and Arbitration In July 2013, after terminating the contract with Nartron, JVIS sued Nartron

in Macomb County Circuit Court, alleging that Nartron failed to perform its contractual obligations. Id. at PageID.9. Four months after JVIS sued Nartron, Nartron filed a countercomplaint against JVIS and a third-party complaint against Futaba America for “misappropriation of Nartron’s trade secrets and other claims.”

Id. Nartron alleges that during this state court litigation, JVIS and Futaba “separately admitted that Futaba reverse engineered Nartron’s PCBAs, including the

software code.” Id. Nartron further alleges that Futaba produced evidence that proved that Futaba “pulled” software from Nartron’s PCBAs to examine and reverse engineer the software code. Id.

Notably, Nartron’s complaint does not provide any information about the outcome of the state court litigation. See generally ECF No. 1. In its motion to dismiss, Futaba America provides its own context and commentary about the events

that occurred during the state court litigation and arbitration. See ECF No. 13 at PageID.137–48. At this motion-to-dismiss stage, the Court will not consider Futaba America’s explanation of what occurred at state court. See id. But because Futaba America’s motion to dismiss is based on the assertion that Nartron’s claims against

it were already litigated in the state court litigation, this Court will take judicial notice of the state court opinions and orders that Futaba America attached to its motion to dismiss and that are all available on the public docket3 to determine whether

Nartron’s patent and trademark claims presently before this court were already litigated and resolved by the state court. These documents include the following four documents: ECF No. Title 13-8 February 29, 2016, Opinion and Order 13-10 June 14, 2016, Opinion and Order 13-11 July 28, 2016, Opinion and Order

3 At the motion-to-dismiss stage, courts may take judicial notice of matters of public record “only when the ‘contents prove facts whose accuracy cannot reasonably be questioned.’” Elec. Merch. Sys. LLC v. Gaal, 58 F.4th 877, 883 (6th Cir. 2023) (quoting Passa v. City of Columbus, 123 F. App’x 694, 697 (6th Cir. 2005)). 13-22 November 20, 2017, Stipulated Order (which includes arbitration award as an exhibit to the order)

Free access — add to your briefcase to read the full text and ask questions with AI

Related

Ashe v. Swenson
397 U.S. 436 (Supreme Court, 1970)
Marrese v. American Academy of Orthopaedic Surgeons
470 U.S. 373 (Supreme Court, 1985)
Dowling v. United States
493 U.S. 342 (Supreme Court, 1990)
Matsushita Electric Industrial Co. v. Epstein
516 U.S. 367 (Supreme Court, 1996)
Bell Atlantic Corp. v. Twombly
550 U.S. 544 (Supreme Court, 2007)
Ashcroft v. Iqbal
556 U.S. 662 (Supreme Court, 2009)
Ritchie v. Williams
395 F.3d 283 (Sixth Circuit, 2005)
Monat v. State Farm Insurance
677 N.W.2d 843 (Michigan Supreme Court, 2004)
Lambert v. Hartman
517 F.3d 433 (Sixth Circuit, 2008)
Double v. Cole (In Re Cole)
428 B.R. 747 (N.D. Ohio, 2009)
Siegel v. Time Warner Inc.
496 F. Supp. 2d 1111 (C.D. California, 2007)
Cataldo v. United States Steel Corp.
676 F.3d 542 (Sixth Circuit, 2012)
Passa v. City of Columbus
123 F. App'x 694 (Sixth Circuit, 2005)
Grace Solis v. Global Acceptance Credit Company, L.P.
601 F. App'x 767 (Eleventh Circuit, 2015)
Smith v. Lerner, Sampson & Rothfuss, L.P.A.
658 F. App'x 268 (Sixth Circuit, 2016)
Jamie Peterson v. David Heymes
931 F.3d 546 (Sixth Circuit, 2019)

Cite This Page — Counsel Stack

Bluebook (online)
UUSI, LLC v. Futaba Corporation of America, Counsel Stack Legal Research, https://law.counselstack.com/opinion/uusi-llc-v-futaba-corporation-of-america-mied-2025.