United States v. New-Form Manufacturing Co.

277 F. Supp. 2d 1313, 27 Ct. Int'l Trade 905, 27 C.I.T. 905, 25 I.T.R.D. (BNA) 1776, 2003 Ct. Intl. Trade LEXIS 77
CourtUnited States Court of International Trade
DecidedJune 30, 2003
DocketSLIP OP. 03-77; Court 01-00034
StatusPublished
Cited by9 cases

This text of 277 F. Supp. 2d 1313 (United States v. New-Form Manufacturing Co.) is published on Counsel Stack Legal Research, covering United States Court of International Trade primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
United States v. New-Form Manufacturing Co., 277 F. Supp. 2d 1313, 27 Ct. Int'l Trade 905, 27 C.I.T. 905, 25 I.T.R.D. (BNA) 1776, 2003 Ct. Intl. Trade LEXIS 77 (cit 2003).

Opinion

OPINION

RIDGWAY, Judge.

In this customs penalty action, plaintiff, the United States, seeks a civil penalty against defendant, New-Form Manufacturing Company, Limited, Canada (“New-Form”), for conduct in connection with its importation of steel jack parts from Canada into the United States. Jurisdiction lies under 28 U.S.C. § 1582 (1994). 1

Pending before the Court is Plaintiffs Application for Default Judgment (“Plaintiffs Application”). For the reasons set forth below, that application is granted. New-Form “has failed to plead or otherwise defend” this action, and default has been entered against it. The record fur *1316 ther establishes that, although New-Form knew that its jack parts were subject to antidumping duties, the company failed to accurately classify and describe its merchandise on its invoices, and - when questioned by its broker - denied that the merchandise was jack parts. New-Form’s conduct thus violated 19 U.S.C. § 1592, and warrants imposition of the maximum penalty for gross negligence, plus interest and costs.

I. Background

A. The Facts of The Case

New-Form, a Canadian corporation located in Canada, manufactured and exported steel jacks and jack parts to the United States. A81 ¶ 3, A101 ¶ 3, A113 ¶ 5(d)-(e). 2 Initially, the company exported completed jacks. But, eventually, it turned to exporting jack parts - including steel beams, handles, large and smah runners, lifting pins, reversing levers, pit-mans, reversing switches, bases, lever guards, and dowel lift pins - which were then assembled into completed jacks in this country. A66 ¶ 54, A191-92 ¶ 4.

Under cover of more than 30 entries, between February 5, 1996 and October 22, 1997, New-Form caused more than 111,-000 jack parts to be entered or introduced into the United States. A84 ¶ 13, A86-87, A102 ¶ 13, A191-92 ¶ 4. Throughout that period, steel jack parts from Canada were subject to antidumping duties. See 61 Fed.Reg. 6,627, 6,627-28 (Feb. 21, 1996).

New-Form was aware of the antidump-ing duty order. Indeed, in 1993, the company sought to have the antidumping duty finding revoked. Al; 60 Fed.Reg. 53,584 (Oct. 16, 1995). However, in its notice of the final results of the 1993-94 administrative review of the finding, the U.S. Department of Commerce explained that New-Form was covered, and described the merchandise covered as “multi-purpose hand-operated heavy-duty steel jacks, ... measuring from 36 inches to 64 inches high, assembled, semi-assembled and unassem-bled, including jack parts, from Canada.” 61 Fed.Reg. 6,627, 6,627-28 (Feb. 21,1996) (emphasis added).

Moreover, in a September 1997 affidavit (presented in the course of litigation in Canada that is unrelated to this case), New-Form’s President - David M. Bou-langer - explained that New-Form decided to export jack parts to U.S. to minimize applicable duties. In his words:

[Sjelling the components of a given product attracts less duty than would a *1317 product in a finished or assembled state; the duty payable is directly proportional to the value of the goods being shipped into the United States.

A65-66 ¶ 54 (emphasis added). See also A67 ¶ 59, A72, AJL71.. Included with the affidavit was a chart, submitted by Mr. Boulanger, which indicated that New-Form’s “Canadian supplied components” were “subject to U.S. Antidumping duty.” A67 ¶ 58, A69 (emphasis added).

Although New-Form knew that the components at issue were jack parts and were to be used for jacks, it failed to reflect that fact on its invoices, which were among the documents used to introduce its merchandise into the U.S. A2-63, A108 ¶ 18(b), A115 ¶ 18(b), A123-26 ¶¶ 56-59, A127 ¶ 64, A132 ¶64, A133 ¶¶ 56-59. New-Form’s invoices also classified the jack parts by Harmonized Tariff Schedule (“HTS”) numbers that do not apply to jack parts. Some parts were identified by reference to HTS 8431.10, rather than the more accurate 8431.10.0090. But other parts were identified by reference to 8201.90.60 and 7326.90. A2-63, A182-85.

Moreover, in mid-June 1996, New-Form was asked point-blank by its broker, Tower Group International (“Tower”), whether the merchandise at issue was - tracking the language of the antidumping duty finding - “heavy duty jack parts with a height of 36"-64."” New-Form responded with an unequivocal “No.” A64.

Although New-Form knew that its merchandise was jack parts to be used for jacks, and although New-Form knew that jack parts were subject to antidumping duties, neither New-Form nor Tower paid those duties until years later - when Tower finally paid them, long after the merchandise had been entered, and after this action had been filed. 3 A170. The jack parts at issue were valued at $81,537.31; and the revenue lost to the United States (ie., the unpaid duties) was, until Tower’s payment, $18,466.84. A192 ¶ 5.

As recently as March 2002, New-Form intended to continue doing business in the U.S., and had transferred certain of its functions and personnel to a related company called “Supplierpipeline.” A172, A176-77. Mr. Boulanger is not only the President of New-Form and, through Northman Holdings, Inc., its sole shareholder (A65, A171); he is also the President and Chief Executive Officer of Sup-plierpipeline, which is a subsidiary of Northman Holdings. A171, A187; SA5-6. And Dan Evans, a former Vice President of New-Form, is now a Vice President of Supplierpipeline. A114 ¶ 12; SA5-6, SA10, SA12.

Although New-Form itself has not exported merchandise into this country since December 2002 (SA15-16), it appears that the company’s business is being continued through Supplierpipeline. Supplierpipe-line represents that it began with “[its] Milverton, Ontario operation of New-Form Manufacturing,” and that it manufactures and distributes jacks. A186; SA9. New-Form’s internet address - www.new-form. com - leads directly to the website of Supplierpipeline. SA2 ¶ 6. And, although Dun & Bradstreet reports that Supplier-pipeline commenced business in 2000(SA6), Supplierpipeline claims to have been doing business for 11 years. SAIL See also A186 (Supplierpipeline boasts of growth rate “for the past 12 years”). Supplier-pipeline even advertises, as one of its products, the “Jackall” jack - the same jack whose parts are the subject of this litiga *1318 tion. A172, A186; SA12, SA14. In fact, in March 2002, Mr. Boulanger, referring to a U.S. auto manufacturer, testified that “we’re selling them Jackall jack product from Supplier Pipe Line.” A172.

In its Spring 2002 newsletter, “In The Pipeline,” Supplierpipeline reported that it was

Free access — add to your briefcase to read the full text and ask questions with AI

Related

United States v. Cruzin Cooler, LLC
459 F. Supp. 3d 1366 (Court of International Trade, 2020)
Perfectus Aluminum, Inc. v. United States
391 F. Supp. 3d 1341 (Court of International Trade, 2019)
United States v. Six Star Wholesale, Inc.
359 F. Supp. 3d 1314 (Court of International Trade, 2019)
United States v. Univar USA Inc.
355 F. Supp. 3d 1225 (Court of International Trade, 2018)
United States v. Sterling Footwear, Inc.
2017 CIT 141 (Court of International Trade, 2017)
United States v. Horizon Products International, Inc.
229 F. Supp. 3d 1370 (Court of International Trade, 2017)
United States v. Country Flavor Corp.
825 F. Supp. 2d 1296 (Court of International Trade, 2012)
United States v. Matthews
533 F. Supp. 2d 1307 (Court of International Trade, 2007)
United States v. ITT Industries, Inc.
343 F. Supp. 2d 1322 (Court of International Trade, 2004)

Cite This Page — Counsel Stack

Bluebook (online)
277 F. Supp. 2d 1313, 27 Ct. Int'l Trade 905, 27 C.I.T. 905, 25 I.T.R.D. (BNA) 1776, 2003 Ct. Intl. Trade LEXIS 77, Counsel Stack Legal Research, https://law.counselstack.com/opinion/united-states-v-new-form-manufacturing-co-cit-2003.