United States v. ITT Industries, Inc.

343 F. Supp. 2d 1322, 28 Ct. Int'l Trade 1028, 28 C.I.T. 1028, 26 I.T.R.D. (BNA) 1977, 2004 Ct. Intl. Trade LEXIS 80
CourtUnited States Court of International Trade
DecidedJuly 8, 2004
DocketConsol. 97-01777
StatusPublished
Cited by10 cases

This text of 343 F. Supp. 2d 1322 (United States v. ITT Industries, Inc.) is published on Counsel Stack Legal Research, covering United States Court of International Trade primary law. Counsel Stack provides free access to over 12 million legal documents including statutes, case law, regulations, and constitutions.

Bluebook
United States v. ITT Industries, Inc., 343 F. Supp. 2d 1322, 28 Ct. Int'l Trade 1028, 28 C.I.T. 1028, 26 I.T.R.D. (BNA) 1977, 2004 Ct. Intl. Trade LEXIS 80 (cit 2004).

Opinion

OPINION

POGUE, Judge.

Plaintiff United States Bureau of Customs and Border Protection 1 moves for summary judgment pursuant to USCIT Rule 56, seeking payment of a civil penalty, together with pre-judgment and post-judgment interest. Defendant ITT Industries, Inc., d/b/a ITT Jabsco (“Jabsco”), opposes Plaintiffs motion and moves for summary judgment, asserting that because Customs improperly calculated the actual loss of antidumping duties Jabsco owed, the agency also inappropriately assessed the civil penalty. Accordingly, Jabsco seeks a refund of excess antidumping duties paid with interest, and either a reassessment of the penalty owed based upon the correct calculation of antidump-ing duties or a rescindment of the penalty demand. Jurisdiction is predicated on 28 U.S.C. § 1581(a) (1988) and 28 U.S.C. *1324 § 1583 (1988). 2 For the reasons discussed below, the Court grants Plaintiffs motion for summary judgment in part, denies its motion in part, and denies Jabsco’s motion for summary judgment. The Court orders trial on the penalty amount.

Background

The Department of Commerce issues antidumping duty orders for imported merchandise that is sold in the United States below its fair market value and materially injures or threatens to injure a domestic industry. See 19 U.S.C. § 1673d. These orders impose antidumping duties reflecting the difference between the foreign exporter’s sales price and the domestic price of the subject merchandise. See 19 U.S.C. § 1673e(a)(l). Upon the entry of merchandise covered by an antidumping order, an importer is required to make a deposit of estimated duties. See 19 U.S.C. § 1673e(a)(3).

The actual liquidation 3 of entries subject to an antidumping order may occur years after importation. Before final liquidation, any interested party may request an administrative review of the antidumping order. See 19 U.S.C. § 1675. The final results of such a review serve as the basis for the actual assessment of antidumping duties on entries of merchandise covered by Commerce’s determination. 19 U.S.C. § 1675(a)(2). Commerce publishes the final results of an administrative review in the Federal Register, and later issues liquidation instructions to Customs directing *1325 that agency to collect antidumping duties at the rates determined in the review proceeding. Id.; 19 C.F.R. § 353.53a(e)(8); see Consol. Bearings Co. v. United States, 348 F.3d 997, 1002 (Fed.Cir.2003) (“Commerce’s liquidation instructions direct Customs to implement the final results of administrative reviews.”); J.S. Stone, Inc. v. United States, 27 CIT -, -, 297 F.Supp.2d 1333, 1338 (2003) (“Commerce issues its final results [of the administrative review] and directs Customs to collect the appropriate antidumping duties.”). If an interested party fails to request an administrative review, Commerce generally directs Customs to liquidate the merchandise at the cash deposit rates in effect at the time the merchandise entered the United States, which rate is published in the Federal Register as the “all others” cash deposit rate, see J.S. Stone, Inc., 27 CIT at -, 297 F.Supp.2d at 1344 (internal citation omitted); 19 C.F.R. § 353.53a(d)(l), 4 unless that party received an individual rate in the original investigation. Antidumping and Countervailing Duty Proceedings: Assessment of Anti-dumping Duties, 68 Fed.Reg. 23,954, 23,959 (Dep’t Commerce May 6, 2003) (notice of policy concerning assessment of anti-dumping duties) (‘Assessment Notice”).

Defendant Jabsco, a division of ITT Corporation, manufactured and sold marine and other liquid pumps, which incorporated cylindrical roller bearings and/or radial ball bearings, types of antifriction bearings, in the United States. Jt. Statement Mat’l Facts Not in Dispute, Def.’s Ex. 1 paras. 1-3 (“Jt. Stat.”). 5 Jabsco imported through the Port of Los Angeles seventy entries of bearings from a related party in the United Kingdom, ITT Jabsco UK (“Jabsco UK”), between November 1988 and April 1991. Id. paras. 5-7. Jabsco UK, which also manufactured and sold marine and other liquid pumps incorporating the same bearing components, purchased the bearings from a division of SKF Ltd. in the United Kingdom. See id. paras. 3-4, 6; Letter from Rufus E. Jarman, Jr., Barnes, Richardson & Colburn, to Imp. Specialist Androvich, Dist. Dir. of Customs, Customs, Pl.’s Ex. 2 at 1 (June 5, 1992); Jabsco’s Responses to Pl.’s First Interrogatories and Request for Production of Documents Directed to Def., Pl.’s Ex. 1 para. 17(a) (“Jabsco’s Inter. Resp.”). The bearings, however, were manufactured by SKF companies located *1326 in France, Germany, and Italy. See Jt. Stat., Def.’s Ex. 1 para. 3; PL’s Mem. Supp. Mot. Summ. J. at 3 (“Pl.’s Mem.”). Upon receipt, Jabsco UK placed the bearings into its inventory and shipped them to Jabsco as needed. Jabsco’s Inter. Resp., PL’s Ex. 1 para. 5(a).

Jabsco described the bearings entered between November 1988 and August 1990 as “pump parts” on the Entry Summaries; entries made between September 1990 and April 1991 were either described as “needle roller bearings” or “pump parts.” Jt. Stat., Def.’s Ex. 1 paras. 9-10. Customs subsequently liquidated the entries as identified between December 1988 and December 1991, id. para. 8, incorrectly classifying the bearings as other parts of pumps for liquids under subheading 8413.91.90 of the Harmonized Tariff Schedule of the United States (“HTSUS”), 6 19 U.S.C. § 1202, or Item 660.97 of the Tariff Schedules of the United States (“TSUS”), the predecessor classification statute, or as needle roller bearings under subheading 8482.40.00, HTSUS. See Jt. Stat., Def.’s Ex. 1 paras. 12-13. 7

Free access — add to your briefcase to read the full text and ask questions with AI

Related

United States v. Harvic Int'l, Ltd.
427 F. Supp. 3d 1349 (Court of International Trade, 2020)
United States v. Sterling Footwear, Inc.
2017 CIT 141 (Court of International Trade, 2017)
United States v. Univar USA, Inc.
195 F. Supp. 3d 1312 (Court of International Trade, 2016)
United States v. Horizon Products International, Inc.
82 F. Supp. 3d 1350 (Court of International Trade, 2015)
Snap-on, Inc. v. United States
949 F. Supp. 2d 1346 (Court of International Trade, 2013)
United States v. National Semiconductor Corp.
30 Ct. Int'l Trade 769 (Court of International Trade, 2006)
Consolidated Bearings Co. v. United States
346 F. Supp. 2d 1343 (Court of International Trade, 2004)
Consol. Bearings Co. v. United States
2004 CIT 107 (Court of International Trade, 2004)

Cite This Page — Counsel Stack

Bluebook (online)
343 F. Supp. 2d 1322, 28 Ct. Int'l Trade 1028, 28 C.I.T. 1028, 26 I.T.R.D. (BNA) 1977, 2004 Ct. Intl. Trade LEXIS 80, Counsel Stack Legal Research, https://law.counselstack.com/opinion/united-states-v-itt-industries-inc-cit-2004.