Ultra-Temp Corp. v. ADVANCED VACUUM SYSTEMS, INC.

27 F. Supp. 2d 86, 1998 U.S. Dist. LEXIS 17943, 1998 WL 789838
District Court, D. Massachusetts·Decided November 9, 1998·No. Civil Action 93-10102-RBC·Published·Cited by 3 cases

Opinion

OPINION ON DEFENDANT’S MOTION FOR SUMMARY JUDGMENT THAT IT DID NOT VIOLATE SECTION 13(a) OF THE LANHAM ACT (# 192).

COLLINGS, United States Magistrate Judge.

I. Introduction

In the sole remaining count of its First Amended Complaint, that being Count VI, plaintiff Ultra-Temp Corporation (“Ultra-Temp”) alleges that defendant Advanced Vacuum Systems, Inc. (“AVS”) violated section 43(a) of the Lanham Act, 28 U.S.C. § 1125(a). AVS now seeks the entry of judgment as a matter of law in its favor on this extant claim, and to that end has filed a motion for summary judgment (# 192) together with a memorandum of law in support (# 193) and a statement of facts (# 194). In response, Ultra-Temp has duly submitted a brief in opposition to the defendant’s disposi-tive motion together with certain appended exhibits (# 196), although no statement of material facts as to which it is contended that there exists a genuine issue to be tried has been included as mandated under Local Rule 56.1. 2 AVS has moved for leave to file a reply to the plaintiff’s submission (# 195), attaching a copy of the reply memorandum to its motion. 3

With the record now complete, the defendant’s motion for summary judgment is in a posture for decision.

*88 II. The Facts

The plaintiff and the defendant were competing manufacturers of low pressure sinter hip furnaces. At some point during the month of January, 1990, Thomas Kershaw, President of Ultra-Temp, and Norman Buck, President of AVS, met to explore the possibility of AVS entering into a licensing agreement for certain Ultra-Temp patents relating to such furnaces. (Statement Of Facts # 194, Exh. A) During this same time period, AVS was negotiating the potential sale of a furnace to General Carbide Corporation (“General Carbide”) 4 . (# 194, Exh. C) On or about February 13, 1990, the Director of Sales and Marketing at AVS, John T. O’Mal-ley, wrote a letter to the President of General Carbide, Premo Pappafava, in order to submit proposals # 4313 and # 4314 for the defendant’s VLPH Series Vacuum/Low Pressure Hipping Furnaces. (Id.) Listed among the notable purported advantages of purchasing an AVS furnace was:

PROCESS INDEMNIFICATION AVS Inc. as an Ultra Temp Corporation Licensee is entitled to both utilize their patented technologies covering designing of Low Pressure Sinter Hip Furnaces, and to indemnify General Carbide on á system basis from litigation pertaining to U.S. Patent #4,575,449 depicting processing of pressure sintered Tungsten Carbide and continuance patents.

Statement Of Facts # 194, Exh. C.

It is undisputed that at the time this letter was drafted, AVS was not in fact a licensee of patents owned by Ultra-Temp. Further, it is uncontested that this letter was sent directly and only to General Carbide and not otherwise disseminated. 5

In a subsequent March 2, 1990 letter between the same parties, Mr. O’Malley on behalf of AVS wrote to Mr. Pappafava as follows:

We are pleased to confirm our indemnification against infringement of the below Ultra Temp patents upon receipt of your written purchase order for the AVS Inc. Pressure Sintering System covered in our quotation # 4313.
Essential Ultra Temp Patents:
PATENT NUMBER DESCRIPTION
4,575,449 Metallurgical Process
4,591,481 Metallurgical Process
4,512,448 Coffin Delivery System
4,431,605 Metallurgical Process
4,398,702 Metallurgical Furnace
4,579,713 Carbon Control
Indemnification will also cover other related patents now issued, or to be issued in this hardware/process area. Indemnification is on a per system basis and is not transferable.

Statement Of Facts # 194, Exh. E.

This letter made no reference whatsoever to AVS’ purported status as a licensee of Ultra-Temp.

Mr. Kershaw faxed a letter to Mr. Buck on or about March 5,1990, to express his regret at the delay in the licensing discussions and also to state that “[i]n order for you to continue with your business, however, I give you my word that a License for no less than two units at a price no less than $160,000 total will be allowed at terms no less than we previously discussed.” (# 194, Exh. B) On even date, Mr. Buck responded that “[b]ased on your letter, we are continuing to pursue some very near term opportunities. We understand that the $160,000 number is a ‘not to exceed’ number, rather than ‘no less than’ as stated in the letter.” (Id.) Ultra-Temp and AVS never ultimately entered into a patent licensing agreement.

The terms of the furnace purchase order dated March 30, 1990, submitted by General Carbide to AVS reflect apparent acceptance of the indemnification proposal set forth in the March 2nd letter. Specifically, as an express condition of the sale, AVS was required to provide:

SYSTEM INDEMNIFICATION
Permits purchaser to utilize process as detailed in the following patents held by *89 Ultra Temp Corporation relating to pressure sintering of tungsten carbide.
PATENT NUMBER DESCRIPTION
4,575,449 Metallurgical Process
4,591,481 Metallurgical Process
4,512,448 Coffin Delivery System
4,431,605 Metallurgical Process
4,398,702 Metallurgical Furnace
4,579,713 Carbon Control
Indemnification will also cover other related patents now issued, or to be issued in this hardware/process area. Indemnification is on a per system basis and is not transferrable. Any litigation costs concerning use of the above patents are to be borne by AVS, Inc. and AVS, Inc. is to provide the defense.

Statement of Facts # 194, Exh. F.

The purchase order is mute regarding any patent licensing by AVS vis-a-vis the Ultra-Temp patents.

Free access — add to your briefcase to read the full text and ask questions with AI

Ultra-Temp Corp. v. ADVANCED VACUUM SYSTEMS, INC., 27 F. Supp. 2d 86, 1998 U.S. Dist. LEXIS 17943, 1998 WL 789838 (D. Mass. 1998).

27 F. Supp. 2d 86 (Ultra-Temp Corp. v. ADVANCED VACUUM SYSTEMS, INC.) — published by Counsel Stack Legal Research, free access to 12M+ legal documents.

Related